In this whitepaper we describe the device to device communication in LTE from a UE point of view. Network elements are described as far as they concern the UE. In addition to the message transmission and reception, a special emphasis is put on the synchronization between UEs and on the security for the message exchange.

29-Sep-2015 | AN-No. 1MA264

ASCII Conversion of Binary Data from Test Receiver for Generation of Test Report on PC

18-Jan-2002 | AN-No. 1EE21

This application note shows how to determine the quality of a video streamed by an LTE mobile with R&S®CMW500 Radio Communication Tester and R&S®VTE Video Analyzer.

08-Sep-2014 | AN-No. 1MA253

This article describes the installation and use of R&S®VENICE DVS for producing and ingesting files for production.

18-Nov-2014

Design and Use of a DTV Monitoring System consisting of DVQ(M), DVMD/DVRM and DVRG

15-Feb-2002 | AN-No. 7BM38

LTE Release 9 Technology Introduction - White Paper

19-Dec-2011 | AN-No. 1MA191

C/N Ratio at Low Carrier Frequencies in SFQ

20-Jul-2001 | AN-No. 7BM09

This application note focuses on coaxial connectors found in RF and microwave applications, providing general information on the available types.

09-Apr-2015 | AN-No. 1MA99

Fading Channel Simulation in DVB

06-Feb-2001 | AN-No. 7BM05

2T pulse shapes

20-Jul-2001 | AN-No. 7BM15

This Application Note presents Test & Measurement equipment for the broadcast and mobile radio sector and discusses some possible test setups.

08-Dec-2011 | AN-No. 1MA176

Remote Usage of STREAM EXPLORER via Ethernet Network

31-Mar-1999 | AN-No. 7BM01

This application note focuses on functional testing and debugging of HDMI interfaces using the R&S®VTC/VTE/VTS. It explains how these instruments can be used to assess the HDCP implementation, the ARC or the CEC functionality.

04-Jun-2014 | AN-No. 7BM85

UMTS Long Term Evolution (LTE) Technology Introduction

14-Sep-2009 | AN-No. 1MA111

Integration of DTV Recorder Generator DVRG into a TCP/IP Network

24-Jan-2002 | AN-No. 7BM07

This application note describes Methods of Implementation (MOI) for precise, fast, and error-free compliance testing of USB Type-C to legacy adapter assemblies supporting USB3.1 Gen1, and USB2.0. Based on 5 Gbps signaling per lane with vector network analyzers from Rohde & Schwarz.

18-Jan-2024 | AN-No. 1SL407

This application note provides an overview of the MHL technology and also describes the Rohde & Schwarz compliance test solution for the system part of the current MHL2.0 standard version.

14-May-2013 | AN-No. 7BM83

Incorrect colours in the RGB display of the 'digital' colour bars

20-Jul-2001 | AN-No. 7BM18

What is a decibel and how should we use it in our calculations? This Application Note is intended as a refresher on the subject of decibels.

21-Apr-2015 | AN-No. 1MA98

Loudspeaker measurements with Audio Analyzers UPD or UPL

04-Jun-1998 | AN-No. 1GA16

The LTE technology as specified within 3GPP Release 8 was first commercially deployed by end 2009.

09-Jul-2013 | AN-No. 1MA232

This application note explains the fundamentals of using S-parameters and discusses some common applications in which S-parameter correction is useful.

27-Jul-2012 | AN-No. 1GP70

This application note describes in detail the steps required to make a noise figure measurement on a spectrum analyzer using the “Y Factor” technique. Background equations are presented for each step of the calculation.

25-Jul-2012 | AN-No. 1MA178

Binary transfer with remote instruments, like the KPI-1200 Series of remote instruments. Learn about the various methods of remote binary transfer, like the KPI-1200, X-20 Series and KPI-2100 Series of instruments in this article.

31-Mar-2022 | AN-No. 1SL381

Vulnerabilities of LTE and LTEAdvanced Communication White Paper

16-Sep-2014 | AN-No. 1MA245

This application note shows how to perform LTE terminal block error rate (BLER) and throughput tests under fading conditions with the R&S®CMW500 Protocol Tester and the R&S®AMU200A Fading Simulator.

27-Mar-2012 | AN-No. 1MA177

A single instrument, the R&S®ETL TV analyzer, performs all required DVB-T / DVB-H transmitter measurements, from the initial acceptance testing for the transmitter, to measurements performed during commissioning and preventive maintenance.

13-May-2013 | AN-No. 7BM101

This application note describes how to use the LTE Frequency Division Duplex (FDD) and Time Division Duplex (TDD) measurement functionality provided by the R&S®CMW500 wideband radio communication tester to perform LTE transmitter and receiver measurements.

17-May-2013 | AN-No. 1CM94

Synchronization of the datarate of TV Test Transmitter SFQ with an external clock

01-Aug-1997 | AN-No. 7BM39

Operating manuals commonly focus on explaining a dedicated feature of a single instrument. This application note examines a range of typical user tasks and how to solve them with the different instruments.

26-Apr-2013 | AN-No. 1GP72