R&S®ZV-WRx/ZCWMxx waveguide calibration kits

up to 1100 GHz

R&S®ZV-WRx/ZCWMxx waveguide calibration kits
Open Lightbox
R&S®ZV-WRx/ZCWMxx waveguide calibration kits
Open Lightbox
R&S®ZV-WRx/ZCWMxx waveguide calibration kits
Open Lightbox
R&S®ZV-WRx/ZCWMxx waveguide calibration kits
Open Lightbox
R&S®ZV-WRx/ZCWMxx waveguide calibration kits
Open Lightbox
R&S®ZV-WRx network analyzer calibration kits – waveguide, Front High R&S®ZV-WRx network analyzer calibration kits – waveguide, Side view R&S®ZV-WRx network analyzer calibration kits – waveguide, Side view R&S®ZV-WRx network analyzer calibration kits – waveguide, Side view R&S®ZV-WRx network analyzer calibration kits – waveguide, Side view

Key facts

  • Waveguide calibration kit series covering 50 GHz to 1100 GHz
  • Including match, short, offset short
  • Optional version including sliding match
  • Calibration kit parameters pre-installed in R&S®VNAs
  • Calibration kit versions with sliding match available

Extending to the mmWave range

The R&S®ZV-WRxx calibration kit series provides waveguide calibration standards for system error correction of mmWave network analyzer setups. All common waveguide bands from 50 GHz to 1100 GHz are supported. The calibration kits contain short, offset short and match. Separate models with a sliding match are also available. The sets come with a hex ball driver and hex ball screws. The calibration kit data are pre-defined on each Rohde & Schwarz vector network analyzer, allowing for straightforward and reliable calibration.

Features & benefits

Sliding match models

Get high-end accuracy

There are extra models that include a sliding match. Using a sliding match instead of a fixed match further increases measurement accuracy.

ZV-WR10 kit with sliding match
Open Lightbox

ZV-WR10 kit with sliding match

High mechanical stability

Short with offset margin for reliable results

Especially with the high-frequency kits, a bare lambda/4 shim standard is very thin, which can result in tensions and bending when connected and in poor accuracy. To ensure reliable results, the shim standard for some ZV-WRxx kits is designed with an additional offset length to ensure high mechanical stability and reproducible results. (Please note: the dedicated offset short is a different standard.)

Available models

Available models
Models
Type
Frequency range
Connector type
Calibration standards

R&S®ZV-WR02

Order number 1314.5550.10

Type
Waveguide calibration kit
Frequency range
325 GHz to 500 GHz
Connector type
WR02
Calibration standards
Short, Offset Short, Match,  without sliding Match

R&S®ZV-WR03

Order number 1307.7300.30

Type
Waveguide calibration kit
Frequency range
220 GHz to 325 GHz
Connector type
WR03
Calibration standards
without sliding match

R&S®ZV-WR03

Order number 1307.7300.31

Type
Waveguide calibration kit
Frequency range
220 GHz to 325 GHz
Connector type
WR03
Calibration standards
with sliding match

R&S®ZV-WR05

Order number 1307.8106.10

Type
Waveguide calibration kit
Frequency range
140 GHz to 220 GHz
Connector type
WR05
Calibration standards
without sliding match

R&S®ZV-WR05

Order number 1307.8106.11

Type
Waveguide calibration kit
Frequency range
140 GHz to 220 GHz
Connector type
WR05
Calibration standards
with sliding match

R&S®ZV-WR06

Order number 1311.8807.10

Type
Waveguide calibration kit
Frequency range
110 GHz to 170 GHz
Connector type
WR06
Calibration standards
without sliding match

R&S®ZV-WR06

Order number 1311.8807.11

Type
Waveguide calibration kit
Frequency range
110 GHz to 170 GHz
Connector type
WR06
Calibration standards
with sliding match

R&S®ZV-WR08

Order number 1307.7900.10

Type
Waveguide calibration kit
Frequency range
90 GHz to 140 GHz
Connector type
WR08
Calibration standards
without sliding match

R&S®ZV-WR08

Order number 1307.7900.11

Type
Waveguide calibration kit
Frequency range
90 GHz to 140 GHz
Connector type
WR08
Calibration standards
with sliding match

R&S®ZV-WR10

Order number 1307.7100.10

Type
Waveguide calibration kit
Frequency range
75 GHz to 110 GHz
Connector type
WR10
Calibration standards
without sliding match

R&S®ZV-WR10

Order number 1307.7100.11

Type
Waveguide calibration kit
Frequency range
75 GHz to 110 GHz
Connector type
WR10
Calibration standards
with sliding match

R&S®ZV-WR12

Order number 1307.7700.10

Type
Waveguide calibration kit
Frequency range
60 GHz to 90 GHz
Connector type
WR12
Calibration standards
without sliding match

R&S®ZV-WR12

Order number 1307.7700.11

Type
Waveguide calibration kit
Frequency range
60 GHz to 90 GHz
Connector type
WR12
Calibration standards
with sliding match

R&S®ZV-WR15

Order number 1307.7500.30

Type
Waveguide calibration kit
Frequency range
50 GHz to 75 GHz
Connector type
WR15
Calibration standards
without sliding match

R&S®ZV-WR15

Order number 1307.7500.31

Type
Waveguide calibration kit
Frequency range
50 GHz to 75 GHz
Connector type
WR15
Calibration standards
with sliding match

R&S®ZCWM-1092

Order number 3628.5699.02

Type
Waveguide Calibration Kit
Frequency range
170 GHz to 260 GHz
Connector type
WM-1092
Calibration standards
without sliding match

R&S®ZCWM-710

Order number 1339.4070.02

Type
Waveguide Calibration Kit
Frequency range
260 GHz to 400 GHz
Connector type
WM-710
Calibration standards
without sliding match

R&S®ZCWM-570

Order number 1322.3099.10

Type
Waveguide Calibration Kit
Frequency range
330 GHz to 500 GHz
Connector type
WM-570
Calibration standards
without sliding match

R&S®ZCWM-380

Order number 1322.3101.02

Type
Waveguide Calibration Kit
Frequency range
500 GHz to 750 GHz
Connector type
WM-380
Calibration standards
without sliding match

R&S®ZCWM-250

Order number 1322.3118.02

Type
Waveguide Calibration Kit
Frequency range
750 GHz to 1100 GHz
Connector type
WM-250
Calibration standards
without sliding match
Network analyzer portfolio

Network analyzer

More information

Extensions

More information

Accessories

More information

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

I want to receive information from Rohde & Schwarz via

Marketing permission

What does this mean in detail?

I agree that Rohde & Schwarz GmbH & Co. KG and the Rohde & Schwarz entity or subsidiary company mentioned in the imprint of this website, may contact me via the chosen channel (email or postal mail) for marketing and advertising purposes (e.g. information on special offers and discount promotions) related to, but not limited to, products and solutions in the fields of test and measurement, secure communications, monitoring and network testing, broadcast and media, and cybersecurity.

Your rights

This declaration of consent may be withdrawn at any time by sending an email with the subject "Unsubscribe" to news@rohde-schwarz.com. Additionally, a link to unsubscribe from future email advertisements is contained in each email sent. Further details on the use of personal data and the withdrawal procedure are set out in the Statement of Privacy.

Your request has been sent successfully. We will contact you shortly.
An error is occurred, please try it again later.
General and legal information

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

Terms & Conditions of the Prize Draw 10 years Rohde & Schwarz oscilloscopes

1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).

2. All participators can register to the draw during January 01, 2020 to December 31, 2020 with their name, company name and business e-mail.

3. Participation is free of charge and not dependent on the purchase of goods or services.

4. The draw is only open to legal entities and only the legal entities are able to win the prizes. An individual person is not allowed to participate on its own name and its own account but as a representative of a legal entity filing the participation form in the name of and on behalf of the legal entity.

5. The prizes to win are 1 of 10 R&S®RTB2000 within the time frame January 1, 2020 to December 31, 2020:

Prize: 1x R&S®RTB2000 Digital Oscilloscope

6. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich. The winner of the prizes will be informed by e-mail within 5 (5) working days.

7. The authorized representative of the legal entity shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.

8. R&S’ employees and members of their families and also person being familiar with the process of the draw and members of their families are excluded from filling the participation form.

9. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.

10. Personal data will be processed only for the purpose of this prize draw and deleted four (4) weeks after the draw, if not agreed otherwise.

11. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Competition. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn.

12. The participants cannot claim the prizes of this draw and no legal recourse is permitted in this respect.

13. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Competition.