5 Results
The use of Rohde & Schwarz device drivers under VEE software is not complicated. However, a number of factors are involved, the errors that occur are often difficult to diagnose. This application provides easy and detailed support for installation and troubleshooting using National Instruments or Agilent GPIB boards.
The purpose of the test setup described is to ensure or to enhance the level accuracy of signal generators or the generator part of communication testers. The level accuracy of test signals is particularly important at low levels when measuring BER level sensitivity at digital communication receivers. The highly linear FSP spectrum analyzer is used in combination with a power meter to get the best possible accuracy with high measurement speed over a very wide level range.
GDE (= Generic Demonstration Engine) is a easy-to-use, free-of-charge remote control command sequencer tool. The big advantage is that the test description is stored in a simple, easy-to-read text file, and loaded in GDE at runtime. This makes it very easy to modify tests by the user or add additional tests to already existing test solutions without redistributing big setup files.
The application note describes the Measurement Uncertainty Analysis Program NRV-Z. The program is used to determine measurement uncertainties that inevitably arise when using power meters. In particular, it covers the NRV-Z family of thermal sensors and diode sensors for high-precision power measurements, as well as the compatible basic units NRVD, NRVS and URV55.
The CMD 57/59 output level for BER measurement can be calibrated to high accuracy to match GSM 11.21, (with modulated signals and adjacent timeslots + 50 dB above the used timeslot) using a simple test setup containing an NRVD power meter and an FSE spectrum analyzer.