83 Results
Drivers for R&S®CMW500
Wireless device production test: breakthrough in scalability, measurement accuracy, speed. New generation test equipment for wireless devices supporting WiMAX.
Drivers for R&S®CMW270 Wireless Connectivity Tester
The non-cellular expert covering WLAN, Bluetooth®, GNSS and various broadcast technologies. The R&S ® CMW270 is a cost-effective alternative for the development and production of equipment outside the conventional cellular networks, specially prepared for the test requirements of IoT (Internet of Things) market.
R&S®CMW Wideband Radio Communication Tester - Platform overview - Product Brochure
R&S CMW Wideband Radio Communication Tester - Platform overview - Product Brochure
How to configure a external trigger at CMW500, CMW290, CMW270 to synchronize with LTE signal time frames
How to configure a external trigger at CMW500, CMW290, CMW270 to synchronize with LTE signal time frames
Using R&S®Forum Application for Instrument Remote Control
Using R&S®Forum Application for Instrument Remote Control
28-Jun-2018 | AN-No. 1MA196
Application Brochure - IEEE 802.11 Wireless LAN Testing with the R&S®CMW
IEEE 802.11 Wireless LAN Testing with the R&S CMW Wideband Radio Communication Tester - Application Brochure
RSCommander
Versatile Software Tool for Rohde & Schwarz Instruments RSCommander is a versatile software tool for a wide range of Rohde & Schwarz spectrum-, network analyzers, signal generators and oscilloscopes. It allows for automatic instrument discovery, making screenshots, reading traces, file transfer and simple script creation.
24-Dec-2017 | AN-No. 1MA074
Application Brochure - Bluetooth® Testing with the R&S®CMW
Bluetooth Testing with the R&S CMW Wideband Radio Communication Tester - Application Brochure
Configuration of the R&S CMW for Bluetooth Low Energy Direct Test Mode
This document describes the direct test mode mechanisms for testing Bluetooth Low Energy devices and explains how the direct test mode connection is established. The R&S CMW uses a USB port for the direct test mode connection while the Equipment under Test (EUT) may provide a USB port, a serial port or even a 2-wire UART interface for this purpose. Installing or assigning the right driver for the EUT is the main configuration task on the R&S CMW. For EUTs with USB port, the R&S CMW provides a Bluetooth Low Energy USB driver which has to be assigned to the connected EUT.
14-Dec-2016 | AN-No. 1C105
IoT Power Consumption Measurement
1MA281 IoT Power Consumption Measurement
17-Feb-2017 | AN-No. 1MA281
Advanced Bluetooth® RF Tests with R&S®CMWrun
The Rohde & Schwarz Bluetooth RF test solution with the R&S CMW and R&S CMWrun is closely aligned to the Bluetooth RF Test Suite.
04-May-2015 | AN-No. 1MA261
Remote Operation of Windows Based T&M Instruments with Android Tablets
Remote Operation of Windows Based T&M Instruments with Android Tablets
22-Aug-2013 | AN-No. 1MA236
Bluetooth® Low Energy (V5.0) RF-Test for Internet of Things Applications
Application Note
19-Jun-2017 | AN-No. 1MA282
Introduction to Attribute Based Instrument Drivers
Introduction to Attribute Based Instrument Drivers
01-Dec-2012 | AN-No. 1MA170
WLAN Connection Establishment
For establishing a WLAN connection between R&S CMW and device under test (DUT), the WLAN properties at the R&S CMW have to be adapted to the test conditions. These can vary in several aspects, particularly due to the different WLAN standards and characteristics of the DUT. This document describes the critical parameters and provides step-by-step procedures for the configuration.
08-Dec-2015 | AN-No. 1C106
Remote Operation of Windows Based T&M Instruments with Apple iPad
This document describes how a Windows®-based R&S® T&M instrument is remotely operated by an Apple iPad as if working on it locally.
28-Mar-2013 | AN-No. 1MA216
Bluetooth® Adaptive Frequency Hopping on R&S®CMW
This document describes the adaptive frequency hopping mechanism for improved signaling performance in Bluetooth Basic Rate and Enhanced Data Rate devices.The R&S CMW provides this feature for remote operation in TX, Loopback and Connection test mode. Thereby the R&S CMW acts as a master, while the Equipment under Test (EUT) represents the slave(s) of the piconet.
14-Dec-2016 | AN-No. 1C108
Bluetooth® Low Energy Over-The-Air Advertiser Testing
This document describes Bluetooth Low Energy RF over-the-air RX and TX measurements using advertising channels for communication with Bluetooth Low Energy devices.With the R&S®CMW-KD611 software option, the R&S CMW tester is able to perform a large number of Bluetooth Low Energy RF tests without operating in the Direct Test Mode.The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Rohde & Schwarz is under license.
14-Dec-2020 | AN-No. 1C109
Rohde & Schwarz Drivers under VEE - Installation and Troubleshooting
Rohde & Schwarz Drivers under VEE - Installation and Troubleshooting
20-Dec-2012 | AN-No. 1MA035
Assisting Tools for Operation of Windows-Based T&M Instruments
Assisting Tools for Operation of Windows-Based T&M Instruments
13-Jun-2013 | AN-No. 1MA218
Development Hints and Best Practices for Using Instrument Drivers
Development Hints and Best Practices for Using Instrument Drivers
01-Jan-2013 | AN-No. 1MA153
WLAN Tests with Signaling and Packet Data
This document describes WLAN tests which rely on communication (signaling) between R&S CMW and device under test (DUT) and on transmission of packet data over WLAN. On the R&S CMW side the WLAN Signaling application is required, for some tests also the Data Application Unit (DAU). The test principles and the necessary settings are explained and background infor-mation is given. Step-by-step procedures are provided for the main configuration tasks.
08-Feb-2016 | AN-No. 1C107
Fast Remote Instrument Control with HiSLIP
This application note introduces the IVI High Speed LAN Instrument Protocol (HiSLIP) and outlines its features. HiSLIP is the successor to the VXI-11 LAN remote control protocol. This document also describes guidelines for using this protocol.
12-Nov-2014 | AN-No. 1MA208
Tests of Bluetooth Low Energy 5.1 Indoor Navigation - Direction Finding
Bluetooth Low Energy (BLE) 5.1 has introduced Angle of Arrival (AoA) and Angle of Departure (AoD) to enrich the direction finding (DF) feature. This application note gives the guidance of how to perform the BLE 5.1 DF RF tests according to the RF test specification of BT 5.1 by using the Rohde & Schwarz test solutions.
30-Oct-2019 | AN-No. GFM327
How to use Rohde & Schwarz Instruments in MATLAB
1MA171 How to use Rohde & Schwarz Instruments in MATLAB
12-Jun-2017 | AN-No. 1MA171
Bluetooth® LE devices – complete RF characterization
The R&S®CMW wireless communication tester offers an elaborate parametric test concept, including RF test cases, that makes this flexible test platform ideal for designing and verifying Bluetooth® Low Energy (LE) circuits and modules.
27-Jan-2017