Remote Emulation with the R&S^®NRP2 Power Meter

28-Feb-2012 | AN-No. 1GP83

Reference factor between RF (referenced to sync top level) and VF

20-Jul-2001 | AN-No. 7BM10

Signal generators and signal analyzers help open up the Wi-Fi 7 signal world and allow initial component and module testing for this new standard.

30-May-2022

How to do Measurements according to TS 34.121 in presence of the HS-DPCCH with the R&S^® CMU200

25-Nov-2005 | AN-No. 1CM62

Measuring conducted emission limits in line with IEC/EN 61000-3-2

27-Mar-2024

Automatic Phase Noise Measurements with Modulation Analyzer FMA (or FMAB or FMB) and Option FMA-B8

03-Jun-1998 | AN-No. 1EF15

In this App card you will learn more about Interference hunting in TDD networks with the polychrome display method and solutions from Rohde & Schwarz.

09-Sep-2020

The terrestrial television standard DVB T2 is gaining in significance as a result of the growing scarcity of available frequencies. New systems are being tested in many countries around the world. Other countries have already completed the introductory phase for DVB T2. Broadcasting transmitters are subject to particularly stringent standards with respect to broadcast signal quality, because even small faults can lead to service disruptions for many viewers or even disrupt adjacent channels.A single instrument, the R&S®ETL TV analyzer, performs all required DVB-T2 transmitter measurements, from the initial acceptance testing for the transmitter, to measurements performed during commissioning and preventive maintenance.The measurements described here satisfy many country-specific and customer-specific test specifications. Users need only set the limit values accordingly.

23-Jul-2014 | AN-No. 7BM106

Tamper protection for monitoring networks in banks

07-Jul-2014

Current radar development is focusing on the area of signal processing. This is taken into account by this educational note, where the R&S®SMW / SMBV instruments on the transmitter side and R&S®FSW / FSV instruments on the receiver side are combined to a closed loop Radar system.

20-Nov-2014 | AN-No. 1MA234

Power Measurements on WLAN Modules with the R&S CMU 200 and with CMUgo

18-Oct-2005 | AN-No. 1CM55

Converting MediaFLO™ Waveform Files to R&S^® SFU / SFE / SFE100 ARB Format Using IQWIZARD/WinIQSIM™ for R&S^® SFx-K35 ARB

10-Nov-2008 | AN-No. 7BM73

The Yamaha® MP Series combined with the R&S®ZNBT vector network analyzer measure the high frequency characteristics of a production lot at high speed and high accuracy.

27-Jan-2020

R&S CMW - IP throughput testing

14-Mar-2016

Selecting Your Next Oscilloscope:

If you are selecting your next oscilloscope and want more insight on how to understand ENOB values measured and published by oscilloscope manufacturers, this document is for you. The effective number of bits (ENOB) is a way of quantifying the quality of analog to digital conversion. A higher ENOB means that voltage levels recorded in analog to digital conversion are more accurate. Understanding oscilloscope vendor-supplied ENOB values can be complex. This document focuses on interpretation of measured ENOB results made on oscilloscopes rather than the math behind ENOB calculations.

21-Jun-2024 | AN-No. 1TD12

Enabling smart macro network enhancements

09-Aug-2016

This application note covers the fundamentals of analog component signals and shows how the signal quality can be measured.

28-May-2015 | AN-No. 7MH107

The R&S®Scope Rider is a handheld oscilloscope that features superior performance at the highest safety standards, combined with the debugging functionalities of a benchtop oscilloscope.

30-Dec-2015

The R&S ® TSStream multi-TS streaming software streams a number of MPEG transport stream files simultaneously over a single IP interface.

16-Mar-2017 | AN-No. 1GP113

Measuring Color-Reproduction Quality on TVs and Monitors

13-Aug-2010 | AN-No. 7BM78

This application note describes the basic frequency filter measurements that are often required during service repairs, during development and for training purposes.

27-Mar-2015 | AN-No. 1MA243

Antenna Measurements, RCS Measurements and Measurements on Pulsed Signals with Vector Network Analyzers R&S ZVM, R&S ZVK

10-Sep-2004 | AN-No. 1EZ52

Rohde & Schwarz offers RF solid-state amplifiers for various frequencies ranging from 9 kHz to 6 GHz and delivering CW power up to 80 kW.

27-Apr-2016

A high frequency transformer is a key component when designing isolated switching mode power supplies (SMPS). Leakage inductance is essential in the control of many design parameters including efficiency, maximum voltage rating for switching elements and EMI when it comes to designs using customized transformers. Accurate measurement of this parasitic element is mandatory. The R&S®LCX LCR meter is ideal for this challenging measurement task.

15-Feb-2022

WiMAX Power Amplifier Testing

03-Aug-2007 | AN-No. RAC-0611-0025

Alibi verification with cellular network analysis

10-Apr-2024

Common mode distortion of wide-bandgap power electronics probing

25-Nov-2024

An offline AC/DC switching converter has no separate bias power supply that provides power to the control integrated circuit itself. Here, an auxiliary primary winding and discrete components are added to supply power to the control circuit. Verifying this circuitry is essential and requires accurate and detailed signal level and timing measurements. The startup sequence takes a long time, which needs to be taken into consideration in the measurement and requires an instrument with sufficient memory.

23-Nov-2022

This application note aims to explain test procedures and characterization of the relevant parameters for active phased array antennas.

04-Jul-2016 | AN-No. 1MA248

Synchronous Node B Testing with R&S CMU300

10-Nov-2005 | AN-No. 1CM58