Generating and Analyzing CDMA2000 Signals

27-Mar-2001 | AN-No. 1MA34

This application note explains how to perform LTE base station measurements over the air (OTA) using the R&S®FSH4/8/13/20 handheld spectrum analyzer.

12-Sep-2013 | AN-No. 1EF87

Seamless Level Setting on the R&S SFU

23-Jun-2006 | AN-No. 7BM54

In this application note we explain how to test FPGA-based hardware emulators using Rohde & Schwarz vector signal generators for creating suitable real-time test signals at reduced sample rates. We further explain how to correctly adapt AWGN signal generation and fading simulation for “slow I/Q”.

10-Dec-2012 | AN-No. 1GP95

LTE user equipment (UE) receiver performance has significant impact to cellular radio network coverage and capacity. It determines the maximum data throughput across the air interface between the LTE base station (eNB, evolved node B) and the mobile network subscriber UE, thus it determines the total capacity across the air interface. Therefore, it is one of the most important measurements to verify the actual receiver performance of individual devices, and a key metric to compare different devices, in particular.This paper shall give an introduction to receiver performance measurements and discusses the measurement metrics as well as the challenges of over the air (OTA) measurements.

31-Aug-2017 | AN-No. 1ST001

Demonstration of BER Test with AMIQ controlled by WinIQSim

29-Sep-1998 | AN-No. 1MA16

Power and Modulation Measurements on VHF Transmitters Example: Rohde & Schwarz VHF-FM Transmitter SU115

04-Jun-1998 | AN-No. 1EF09

Vector Network Analyzers of t ZNA and ZNB family are able to measure magnitude and phase of complex S-parameters of a device under test (DUT) in the frequency domain.

30-Jul-2020 | AN-No. 1EP83

This document describes Bluetooth Low Energy RF over-the-air RX and TX measurements using advertising channels for communication with Bluetooth Low Energy devices.

14-Dec-2020 | AN-No. 1C109

This application note provides guidance on the use of the software option, both for direct control and programming via the touchscreen, and for remote control using SCPI.

13-Jul-2020 | AN-No. GFM345

Primer

selection of appropriate RF power sensor

26-May-2021

Models: R&S®ZVA-Z90, R&S®ZVA-Z110, R&S®ZVA-Z110E, R&S®ZVA-Z110E

This application note provides a brief examination of key 802.11ad parameters, describes the required measurements and test setups and contains several important recommendations for over-the-air (OTA) measurements.

17-May-2017 | AN-No. 1MA260

Versatile power analyzer for AC/DC load and standby current characterization with graphical displays such as harmonic analysis, waveform and trend chart functions

All electronic devices have capacitive or inductive parts that that generate inrush current when switched on. This is more than just a part of operations – it is a vital aspect and demands keen oversight. The R&S®NPA power analyzers are the right instrument for the job.

28-Mar-2024

The R&S®NPA power analyzer is the first compact AC/DC load and standby current characterization tester for measurement with no additional tools such as computers or remote infrastructure.

Guide to adaptive frequency hopping for improved Bluetooth® BR/EDR signaling performance

14-Dec-2016 | AN-No. 1C108

Japanese language broadcaster NHK CosmoMedia Europe (NCME) offers two premium channels for audiences in Europe, the Middle East and North Africa. It wants to bring the playout of these channels in-house, to achieve operational savings through a high degree of automation while maintaining the highest levels of availability.

T&M solution guide for network infrastructure equipment providers

Want to know how the air traffic control solutions by Rohde & Schwarz work? Watch our ATC application videos.

Rohde & Schwarz provides regulatory authorities with advanced spectrum monitoring solutions and the means to ensure ITU compliance and detect interferences. Learn more!

Discover our NTN device testing solutions. We support all aspects of NTN-IoT device testing to ensure high product quality and adherence to industry standards.

Non-terrestrial networks (NTN) enable global access to services like mobile data, voice calls and messaging, regardless of geographical location or terrain

Discover Rohde & Schwarz at MWC Barcelona 2026 (Hall 5, Stand 5A80): NTN, AI-RAN, Wi-Fi 8 and mission-critical testing for reliable next-gen networks.

Learn why network synchronization measurements in the time domain are becoming increasingly important given the high flexibility of 5G NR.

Learn about extremely short latencies in 5G and how they will enable the use of new applications, e.g. eGaming, and introduce new non-human user classes.

Read more about the challenge of timing alignment between 5G base stations as this has a large effect on inter-cell interference and user experience.

Do you want to learn more about test procedures for mobile network testing, efficient data collection and test case classification? Read more here.

Discover how scanners enable real NB-IoT coverage evaluations as they can measure all cells independent of their spectrum implementation and RF parameters.

Network measurements with drones offer telecom authorities and operators valuable insights into coverage, data throughput, and latency at flight altitude.