R&S®SMB100A - FAQ

Results 3
  • Easy remote control of latest Rohde&Schwarz signal generators

    How can I easily remote-control the SMBV, SMA100A, SMB100A, SMC100A, SMF100A via LAN withoutrequiring additional software or hardware ?This function is integrated into the latest firmware of the SMBV, SMA100A, SMB100A, SMC100A, SMF100Agenerators. It enables you to remote-control the device with a PC independently of the PC's operating system.It also works with Linux and Mac OS.Connect your device (

  • Remote control via USB - what is the product ID?

    I want to remote-control the SMB100A via USB.The vendor ID for Rohde&Schwarz is 0x0AAD but what is the device ID for the SMB100A?The device ID of the SMB100A is 0x0054.The string for addressing an SMB100A via USB is as follows:USB::0x0AAD::0x0054::<serial No.>::INSTRYou can find this address string also directly in the SMB100A underSETUP => REMOTE: USB => VISA Recource String

  • Remote Control via Telnet

    I want to remote-control the signal generator via LAN and Telnet. How can I do this?For proper operation of the SMA100A in a Telnet connection, the raw TCP/IP interface command should have the following syntax: telnet <ip-addr> <port-number>The port number should be "5025". telnet <ip-addr> 5025Remote control is possible via "Raw Ethernet". VISA is not required on the computer.The instrument is also

Thank you.

Your request was successfully sent!

We will get in touch with you soon.

Your Rohde & Schwarz Team

Download

Please enter your first name.

Please enter a valid email address.

Please enter your name.

Please enter your company name.

Please enter your location.

Marketing permission
Please enter the characters shown in the image
show captcha

The input was not correct.
International Website