R&S®TS8996 RSE Test System

• Radiated spurios emission measurements (RSE) for 2G, 3G, 4G, 5G FR1, 5G FR2, BT and WLAN devices
• Frequency range from 30 MHz to 18 (40) GHz, and up to 200 GHz for 5G FR2
• Radiated measurements in line with ETSI EN 301 489, ETSI EN 301 908, FCC 47 CFR and 3GPP TS51.010 standards
• The modular design of the filter bank makes technology upgrades and maintenance quick and easy
• Signal conditioning unit OSP-B155G for RSE measurement around the carrier of 3G, 4G and 5G FR1 devices with carriers up to 26 dBm in the frequency range 30 MHz to 8 GHz without any notch filters. By this all bands, channels and bandwidth are supported. In addition this allows the measurement of 5G FR1 NSA mode (non-standalone mode), where the 4G and 5G carrier are present at the same time.
• Measurement automation by R&S EMC32 for 2G, 3G, 4G, WLAN, BT and R&S ELEKTRA for 5G and CMW / CMX for signalling.
• Conducted spurious emission measurements from 100 kHz to 12.75 GHz on antenna connector of the DUT

The R&S^®EMC32/R&S^®AMS32 Measurement Software contains open source software packages. Copies of the respective licenses are included in the 'R&S^®EMC32 and R&S^®AMS32 Measurement Software Open Source Acknowledgement'.- Please refer to the Download/Software area of this web site.

The R&S®TS8996 RSE test system is designed for EMI and radiated spurious emission tests on wireless devices. The test system is often combined with a semi-anechoic or fully-anechoic chamber. The modular design allows an easy extension to new communication technologies. The R&S®TS8996 is applicable during R&D or for EMC type approval. Typical devices under test (DUTs) are mobile phones, cellular base stations, radio sets and radiated measurements on other short-range devices.

The relevant standards for these DUTs stipulate a wide range of test setups and a wide and high frequency range (up to 40 GHz). For 5G FR2 devices the frequency range of an ESW or FSW with option B21 is extended up to 200 GHz by receive units TC-RSE. Also dedicated RSE test routines for this frequency range are covered. The test system can be easily adapted to customer-specific requirements.

For measurement on wireless devices:

• Turnkey system solution
• Supporting also 5G FR1 and FR2
• Automatic setup and control of the wireless link
• Control of different 3D EUT manipulators ad antenna masts
• Signal conditioning unit for measurement around carrier without notch filter, covering 30 MHz to 8 GHz (3G / 4G / 5G FR1 / WLAN / BT) and 18 GHz to 41 GHz (5G FR2)
• ERP/EIRP measurement
• Automated measurement 41 GHz to 200 GHz for 5G FR2 UEs with dedicated test routines for early pass/fail, maximization, 2D / 3D cut and TRP for RSE