341 Results
Differential measurements with Spectrum Analyzers and Probes
28-Jun-2013 | AN-No. 1EF84
IQWizard - IQ Signal Measurement and Conversion
26-Apr-2013 | AN-No. 1MA028
Digital pre-distortion (DPD) is a common method. This article describes an approach to generate a pre-distorted signal based on a hard-clipper.
13-Sep-2017 | AN-No. 1EF99
The application note address test and measurement possibilities for DVB-S2 and DVB-S2X signals in the Ku & Ka -band.
08-Mar-2016 | AN-No. 1MA273
The document focusses on devices for the 3.5 GHz NR (5G New Radio) candidate band, but its findings are equally applicable to developments and measurements for K-band satellite applications or mmW NR candidate bands,
01-Aug-2017 | AN-No. 1MA289
13-Mar-2023
Rohde & Schwarz and SatixFy to demonstrate wideband DVB-S2X beam hopping and DVB-RCS2 at Satellite Show 2023Rohde & Schwarz will showcase an end-to-end test infrastructure featuring its R&S SMW200A vector signal generator and R&S FSW signal and spectrum analyzer together with SatixFy’s Sx3099 modem ASIC demonstrating DVB-S2X Annex E wide bandwidth beam hopping and high bit rate DVB-RCS2 transmission.
This application note describes how all required receiver (Rx) tests (TS25.141 Chapter 7) can be performed easily and quickly by using vector signal generators and CW sources from Rohde & Schwarz.
21-Oct-2014 | AN-No. 1MA114
Hints and Tricks for Remote Control of Spectrum and Network Analyzers
19-Aug-2014 | AN-No. 1EF62
This Application Note addresses signal measurements and analysis of automotive radars that are crucial during the development and verification stages.
10-Jun-2016 | AN-No. 1MA267
22-Sep-2022
Rohde & Schwarz paves way for early sub-THz research activities with new R&S FE170 D band frontend extensionsFor more information, visit: https://www.rohde-schwarz.com/product/FE170 200_61133 The R&S FE170ST and R&S FE170SR extend the frequency range of the R&S SMW200A and the R&S FSW to 110 GHz to 170 GHz.
Rohde & Schwarz User Manual for R&S®FSV3-K60 Transient Analysis; provides all the information specific to the application. All general instrument functions and settings common to all applications are described in the main R&S FSV3000 User Manual.
LTE is under continuous development. Release 10 (LTE-Advanced) introduced carrier aggregation (CA) as the primary enhancement. Releases 11 and 12 add several new components to LTE. Some are enhancements to existing features (such as improvements to CA), while others are completely new concepts, such as coordinated multipoint (CoMP).This application note summarizes the Rohde & Schwarz test solutions for LTE-Advanced according to Releases 11 and 12 using vector signal generators, signal and spectrum analyzers and the wideband radio communication tester.
14-Jul-2016 | AN-No. 1MA272
Direct remote control of OSP via VNA and SA
06-Dec-2013 | AN-No. 1MA226
The video shows the generation and analysis of a 5G NR TM3.1 test model based on the R&S®SMW200A vector signal generator and R&S®FSW signal and spectrum analyzer. Testing Predefined 5G NR Signals | Rohde & Schwarz Generate and analyze predefined 5G NR signals to test basestation transmitters or to characterize components like power amplifiers using the SMW200A and FSW
The test solution is based on the R&S ® SMW200A vector signal generator and the R&S ® FSW signal and spectrum analyser. The R&S ® SMW200A provides realtime RF and envelope signal generation plus digital predistortion in one instrument and the R&S ® FSW enables full PA characterization, including EVM, gain and distortion measurements.
03-Aug-2022
Rohde & Schwarz announces comprehensive test solutions for 5G NR Release 17The latest features included in 5G NR Release 17 are set to improve system performance and enable expansion into new applications. To address testing challenges in these latest demanding 5G standards, Rohde & Schwarz has introduced a comprehensive set of coordinated software options for its vector signal generators and signal and spectrum analyzers.
conducted conformance testing according to TS 38.141-1, Rel. 15
This application note describes how all mandatory RF receiver tests can be performed quickly and conveniently with signal generators from Rohde & Schwarz.
02-Dec-2020 | AN-No. GFM314
The setup based on the R&S ® SMW200A vector signal generator and the R&S ® FSW signal and spectrum analyzer can test bandwidths up to 2 GHz, which is 100 times larger than in current LTE networks. FSW, Test & Measurement, Signal and Spectrum Analyzer This Video shows unleashing 5G mm-wave frequencies presented at GSMA MWC 2015
The R&S®FSW signal and spectrum analyzer measures, for example, distortion and power added efficiency (PAE). FSW, Test & Measurement, Signal and Spectrum Analyzer This Video shows most versatile and easy envelope tracking test setup presented at GSMA MWC 2014
vector signal generator and FSW signal analyzer
The demystifying 5G video series discusses main topics related to 5G including requirements, timeline, potential frequency and waveform candidates. video, SMW200A, FSW, signal generator, signal analyzer, 5G Full power frequency sweep for 5G PA characterization
The R&S®FSW signal and spectrum analyzer downconverts the received signal and provides digitized I/Q samples to an external software tool to calculate channel impulse response and channel transfer function.
This application note describes the configuration of a Miracast wireless video transmission system and how to measure delay times.
01-Oct-2015 | AN-No. 1MA250
R&S®Fxx-K40 Phase Noise Measurement Application – R&S®FSW-K40, R&S®FSMR3-K40, R&S®FSV3-K40, R&S®FPS-K40, R&S®FSV-K40, R&S®FPL1-K40 - Specifications
The R&S®SMW200A vector signal analyzer and R&S®FSW signal and spectrum analyzer from Rohde & Schwarz make the calibration of the signal path towards the device under test (DUT) simple and easy, as demonstrated in this video The demystifying 5G video series discusses main topics related to 5G including requirements, timeline, potential frequency and waveform candidates video, SMW200A, FSW, signal generator
Capturing a trace in Spectrum Analyzer mode using Matlab
conducted conformance testing according to TS 38.141-1, Rel. 16
This application note describes how all mandatory RF transmitter tests according to Release 16, can be performed with signal or spectrum analyzers from Rohde & Schwarz.
27-Jan-2021 | AN-No. GFM313
Specification of the R&S iq-tar file format for importing and exporting I/Q data
Measurement points of a spectrum analyzer
This video provides an overview on 5GTF test solutions based on the R&S®SMW200A vector signal generator and the R&S®FSW signal and spectrum analyzer from Rohde & Schwarz. video, SMW200A, FSW, signal generator, signal analyzer, 5GTF, 5G This video provides an overview on 5GTF test solutions based on the R&S®SMW200A vector signal generator and the R&S®FSW signal and spectrum analyzer from Rohde & Schwarz