349 Results
The video demonstrates how to quickly verify components with different important 5G NR physical layer parameters using the 5G NR generation and analysis options of the R&S SMW200A vector signal generator and the R&S FSW signal and spectrum analyzer. 5G NR Signal Generation and Analysis for component testing, video, R&S SMW200A The video demonstrates how to quickly verify components with different important
This video shows how to perform such coexistence tests using R&S’s high-end GNSS simulator R&S®SMW200A. video,SMW200A, GNSS simulation The performance of GNSS receivers must be validated and characterized not only under ideal conditions, but also in the presence of other communication signals like GSM, UTMS or LTE.
With R&S instruments like the R&S®SMW200A and the R&S®FSW realistic NPR measurements can be performed by using modulated signals. Noise Power Ratio Measurements | Rohde & Schwarz With the R&S®SMW200A and the R&S®FSW realistic NPR measurements can be performed by using modulated signals. Increase the performance of your amplifier.
The R&S®SMW200A vector signal generator can internally simulate all MIMO constellations up to 8x2, including fading. Higher order MIMO testing, LTE, WLAN 802.11ac MIMO testing requires a signal generator with multipath and standard-compliant fading simulation in all signal paths.
The test solution is based on the R&S ® SMW200A vector signal generator and the R&S ® FSW signal and spectrum analyser. The R&S ® SMW200A provides realtime RF and envelope signal generation plus digital predistortion in one instrument and the R&S ® FSW enables full PA characterization, including EVM, gain and distortion measurements.
Testing Direction Finding Devices Using R&S®Pulse Sequencer and R&S®SMW-K545 This video shows how to define a Direction Finding scenario in the R&S®Pulse Sequencer software and how to replay the scenario on a 4 channel R&S®SMW200A setup that has been aligned in terms of amplitude, delay and phase.
It is also demonstrated how CRPAs can be tested using R&S’s high-end GNSS simulator R&S®SMW200A. video,SMW200A, GNSS simulation This video shows how to perform advanced interferer simulations for testing multi-antenna GNSS receivers with anti-jam capabilities, also known as Controlled Reception Pattern Antennas (CRPAs).
Rohde & Schwarz manual for the R&S®SZU100A IQ upconverter.
The setup based on the R&S ® SMW200A vector signal generator and the R&S ® FSW signal and spectrum analyzer can test bandwidths up to 2 GHz, which is 100 times larger than in current LTE networks. FSW, Test & Measurement, Signal and Spectrum Analyzer This Video shows unleashing 5G mm-wave frequencies presented at GSMA MWC 2015
The setup is based on the R&S ® SMW200A vector signal generator, the R&S FSW signal and spectrum analyzer and the R&S ® RTO oscilloscope to test bandwidths up to 2 GHz . This makes the solution ideal for developing transceivers for 5G. video, oscilloscope, LTE, SMW200A, FSW, RTO, 5G A compact test solution to generate and analyze ultra-wideband signals has been demonstrated by Rohde & Schwarz at the
A combination of the R&S®SMW200A vector signal generator and the R&S®FSW signal and spectrum analyzer equipped with the R&S®FSW-K19 option can be used to characterize two-port devices such as satellite transponders, power amplifiers and converters.
The realtime RF and envelope signal is provided from a single instrument, the R&S®SMW200A vector signal generator. The R&S®FSW signal and spectrum analyzer measures, for example, distortion and power added efficiency (PAE). The most versatile and easy envelope tracking test solution has been demonstrated by Rohde & Schwarz at the GSMA Mobile World Congress 2014 in Barcelona.
Group delay measurements made fast and easy with the R&S®FSW and R&S®SMW The R&S®FSW spectrum analyzer and R&S®SMW200A signal generators can be used to measure absolute and relative group delay (GD) on satellite transponders, frequency converters and other components.
The video demonstrates the configuration of an LTE signal including MBSFN subframes based on the R&S SMW200A vector signal generator. Dynamic spectrum sharing (DSS) enables 5G NR to coexist with LTE in the same frequency bands. The video demonstrates the configuration of an LTE signal including MBSFN subframes based on the R&S SMW200A vector signal generator.
This application note describes how all required transmitter (Tx) tests can be performed quickly and easily by using signal and spectrum analyzers.
11-May-2016 | AN-No. 1MA154
Rohde & Schwarz Manual for the R&S®SZV100A Q-/V-Band 36- 56 GHz RF-Upconverter.
Rohde & Schwarz system manual for the R&S®UD1065 Up- / Downconverter; it provides all the information required to measure IEEE 802.11ad signals.
The R&S®FSW signal and spectrum analyzer with the R&S®FSW-K18 amplifier measurement option and in combination with the R&S®SMW200A vector signal generator characterizes amplifiers and other two-port devices with any given stimulus.
Based on the R&S®SMW200A vector signal generator and the R&S®FSW signal and spectrum analyzer, Rohde & Schwarz demonstrated WLAN IEEE 802.11ad signal generation and analysis as an example of a broadband signal up to 2 GHz.
Using the R&S SMW200A vector signal generator makes it very easy to set up a 5G cell.
This video demonstrates the generation of a 5G NR waveform using the R&S®SMW200A vector signal generator and the R&S®SMW-K114 5G air interface candidates option from Rohde & Schwarz. In this example the 5G waveform uses one of the physical layer parameterization currently discussed in 3GPP RAN1.
The demystifying 5G video series discusses main topics related to 5G including requirements, timeline, potential frequency and waveform candidates. video, SMW200A, FSW, signal generator, signal analyzer, 5G How about 5G EVM measurements better than 40 dB at 28 GHz?
Together with the R&S®SMW200A vector signal generator and the R&S®FSVA3000 signal and spectrum analyzer, this setup provides a cost-efficient solution for 5G RF characterization tests. SMW200A, 5G FR2, base station test, OTA test, FSVA3000, FE44 Follow this video series on our latest T&M innvoations for 5G devices, base stations and 5G mobile networks and many more topics.
The R&S MATLAB® Toolkit for Signal Generators provides scripts and routines for remote controlling Rohde & Schwarz signal generators. For example, it includes a MATLAB® script that turns I/Q vectors into the R&S waveform file format for use with an ARB generator.
26-Apr-2013 | AN-No. 1GP60
Amplifier measurements with Rohde & Schwarz spectrum analyzers Flyer
With the R&S ® Pulse Sequencer software - Revolutionized pulsed signal generation: easy, intuitive, powerful - , engineers now have a single software tool to define pulsed signals for different levels of complexity.
27-Jul-2017
Based on the R&S®SMW200A vector signal generator and the R&S®FSW signal and spectrum analyzer, Rohde & Schwarz demonstrated WLAN IEEE 802.11ad signal generation and analysis as an example of a broadband signal up to 2 GHz.
MWC2019, SMW200A, SMW-B15, FSW, fading, 5G, Rel.15, base station test, performance test, FR1, FR2 Rohde & Schwarz shows the most compact solution on the market for 5G NR base station performance testing at GSMA Mobile World Congress 2019 in Barcelona.
FE170ST, FE170SR, 6G tester, 6G test quipment, D-Band test equipment The basebands of a 2-path R&S®SMW200A signal generator can be combined to provide a signal with 4 GHz RF bandwidth.
13-Mar-2023
Rohde & Schwarz and SatixFy to demonstrate wideband DVB-S2X beam hopping and DVB-RCS2 at Satellite Show 2023Rohde & Schwarz will showcase an end-to-end test infrastructure featuring its R&S SMW200A vector signal generator and R&S FSW signal and spectrum analyzer together with SatixFy’s Sx3099 modem ASIC demonstrating DVB-S2X Annex E wide bandwidth beam hopping and high bit rate DVB-RCS2 transmission.