Download Center

update/software/secu/2019/05/windows6.1-kb4499175-x64_3704acfff45ddf163d8049683d5a3b75e49b58cb.msu 2 Check Applicable Instruments 2.1 Instruments, where the patch has been tested and released The following table shows an overview of applicable instruments: Device Windows XP (Embedded) SP3 Windows Embedded 7 32-bit Windows Embedded 7 64-bit SFE, SFC X BTC X UPV, UPP X X AFQ100A, AFQ100B X SMU200A, SMJ100A

For further information please refer to "www.rohde-schwarz.com/royalty-free-products".35 MBV 4.0 13.12.2018 R&S®SMx RF and Baseband Correction Toolkit Software for equalizing I/Q imbalance and RF frequency response of generator setups consiting of a R&S®AFQ100A / R&S®AFQ100B and a R&S®SMU200A / R&S®SMJ100A / R&S®SMATE100A / R&S®SMBV100A / R&S®SGS100A.

English (PD 5213.5074.22)

File DescriptionDateLabVIEW driver rsrfsiggen history 01.03.2021 IVI.NET driver RsRFSigGen history 01.03.2021 LabWindows/CVI, VXIpnp driver rsrfsiggen history 01.03.2021 Driver NameSizeVersionDateLabVIEW 2015 driver rsrfsiggen 60 MB1.13.0 01.03.2021 VXIplug&play x86 driver rsrfsiggen 10 MB1.13.0 01.03.2021 VXIplug&play x64 driver rsrfsiggen 11 MB1.13.0 01.03.2021 IVI.NET x64 driver RsRFSigGen Installs

Describes all instrument functions and remote control commands of the base unit, including measurement and programming examples. Also describes some general functions that apply to several applications.Includes the contents of the Quick Start Guide manual.The online version contains the documentation for the R&S®SMJ100A base unit and all options for immediate display (no download required).

English (PD 5213.5074.12)

Slide left Slide right

R&S®SMJ100A Vector Signal Generator - Product Brochure

R&S®SMJ100A Vector Signal Generator - Product Brochure RU

R&S®SMJ100A Vector Signal Generator - Product Brochure ZH

Provides the information required to prepare the instrument for use and start working.Basic operations and handling are described.

Provides information on security issues when working with R&S®SMJ100A in secure areas.

Describes the specific functions of the application, including the remote control commands with programming examples.The R&S®WinIQSIM2TM User Manual (online version) contains the documentation of the software and all options for immediate display (no download required).Tip: Click on the title of this page for information on where to find the user manuals of the digital standards.

Describes the specific functions of the application. Information required to install and prepare the software for use and start working, as well as the remote connection to Rohde&Schwarz instruments are described.The application is supported by the following products:R&S®SMBV100A, R&S®SMU200A, R&S®SMATE200A, R&S®SMJ100A, R&S®AMU200A and the I/Q modulation generators R&S®AFQ100A and R&S®AFQ100B.For information on operating the product see the corresponding user manual.

This Application Note presents means to integrate R&S Test and Measurement instruments into the Agilent® ADS® Design System. Methods to include R&S Instruments are presented, accompanied by a free-of-charge software solution which is provided with this application note. It makes it very easy to include R&S Instruments into your ADS environment and your design flow. Versions for both WINDOWS XP® and LINUX® operating systems are available.

04-Aug-2012 | AN-No. 1MA72

This document provides an introduction to SDR as used for military radios and presents the relevant T&M solutions offered by Rohde & Schwarz.

15-Sep-2012 | AN-No. 1MA206

This Application Note describes the HSDPA uplink channel structure. Challenges for UE power amplifier design are outlined, and guidelines how to use R&S measurement equipment for testing UE power amplifiers are provided. An outlook on High Speed Uplink Packet Access (HSUPA) and the impact of HSUPA on the uplink channel structure is given.

11-Jul-2011 | AN-No. 1MA84

This document describes how a Windows®-based R&S® T&M instrument is remotely operated by an Apple iPad as if working on it locally. Step-by-step procedures are provided for setting up and configuring the T&M instrument and the iPad. On the iPad, a special App implements the Windows® 'Remote Desktop' functionality. T&M instrument and iPad are connected via WLAN (also denoted as Wi-Fi network).

28-Mar-2013 | AN-No. 1MA216

In response to the growing number of WLAN modules that also support a cellular network (converged devices), CTIA published a plan with new tests in August 2006 that certifies Wi-Fi conformance. This Application Note first addresses the transmitter tests of the CTIA plan. For these tests Rohde&Schwarz offers preprogrammed instrument setups. They enable you to perform the measurements on the WLAN test set easily and quickly. Moreover, this Application Note shows how you can check the spectrum transmit mask defined for OFDM by means of only one keystroke on the Rohde&Schwarz spectrum analyzers.

11-Oct-2006 | AN-No. 1MA107

More and more mobile radio networks implement remote radio equipment (RE) that is connected to the base station main unit via a digital interface using standardized transmission protocols such as CPRI. For testing RE devices Rohde & Schwarz offers a complete test solution based on the R&S®EX-IQ-BOX [Model K04]. This key component is a configurable digital interface module that is used to connect Rohde & Schwarz test equipment to a RE under test using CPRI data transmission. This application note explains in detail the instrument setup and configuration needed to successfully test your remote radio head.

05-Aug-2013 | AN-No. 1GP78

The Electromagnetic Disturbance (EMD) emitted by Proximity-Integrated-Circuit-Cards (PICC) is a unwanted form of load modulation. This Application Note describes a method for measuring EMD during data transmission using vector signal analysis

19-Oct-2007 | AN-No. 1MA120

RF physical layer specifications (such as 3GPP TS36.104) describe a variety of requirements that the end equipment needs to meet. This application note provides insight into some of these specifications and how test & measurement equipment can simplify the task of deriving requirements for RF sub-systems.

10-Apr-2013 | AN-No. 1MA221

Nearly all tests in accordance with the test specification* can be performed with the R&S® CMU200/CBT alone. Some tests additionally call for signal generators to provide interference signals and also require spectrum analyzers. This application note describes the tests performed with additional equipment and presents straightforward solutions based on the CBTgo software.

06-Mar-2013 | AN-No. 1MA106

This Application Note gives an introduction to measurements of WiMAX signals according to standards 80216-2004 and 802.16e-2005. It describes all kind of signal generation from simple signals to multiple-zone signals, also under multipath environment (fading), and covers all signal measurements from power and spectrum analysis, crest factor and CCDF measurement down to bit pattern analysis and modulation measurements. Please see also 1MA96 for General information about the WiMAX standard and 1EF57 for an introduction to the WiMAX standard.

10-Jul-2006 | AN-No. 1MA97

Rohde & Schwarz instruments can be shared when users wish to use the same instrument. This can be done quite easily with the LAN interface, which comes as a standard option. Through this interface, Rohde & Schwarz instruments can be connected directly to a network, and users with access to the network can manually operate the instrument from a remote computer. This Application Note lists all instruments that support these features and describes the steps necessary to set up and configure the network connection to operate these instruments remotely.

05-Jul-2007 | AN-No. RAC-0703-0029

Noise Power Ratio Signal Generation and Measurement

Noise Power Ratio (NPR) is an add-on tool for WinIQSIM™ to generate noise power ratio stimulus signals and measure the resulting noise power ratio of a device under test (DUT) using Rohde & Schwarz instruments via LAN or GPIB bus.

06-Nov-2015 | AN-No. 1MA29

This application note is a programming guide. It briefly summarizes basic tips and information about SCPI programming for remote-controlling Rohde & Schwarz signal generators.

26-Apr-2013 | AN-No. 1GP79

Verification of baseband data is an important step in the early development phase of LTE/LTE-A-ready products. Comparison values for baseband data (test vectors) from other sources can be very useful in order to verify the correct implementation of the standard. Option K81 for the R&S®SMx200A vector signal generator offers sample data for LTE at the bit level. The reference data enables users to test their own implementation of the specification. The LTE bit stream verification program shown here uses data generated by this option and offers a (bitwise) comparison with bit streams generated for an LTE downlink signal. Therefore it demonstrates, how easy the option R&S SMx-K81 can be integrated into the simulation and design process during the development of LTE/LTE-A handsets or base stations.

02-Feb-2011 | AN-No. 1MA161

This appication note introduces a program suitable for generating and analyzing WiMAX IEEE 802.16 signals for power amplifier testing. The program allows the user to change the generator settings, to select specific pre-defined test parameters and to analyze the test results. The application note describes the test parameters and the features and capabilities of the program.

03-Aug-2007 | AN-No. RAC-0611-0025

The R&S MATLAB® Toolkit for Signal Generators provides routines for remote controlling these instruments. Additional MATLAB® scripts turn I/Q vectors into the Rohde & Schwarz waveform file format for use with an ARB. This application note describes the installation and use of the R&S MATLAB® Toolkit on Microsoft Widows and Linux based systems.

26-Apr-2013 | AN-No. 1GP60

The R&S EX-IQ-Box serves as a digital baseband interface between a device under test (DUT) and Rohde & Schwarz generators, analyzers and radio communication testers. The DigIConf software supplied with the device controls up to four R&S EX-IQ-Boxes in a test setup and can thus output IQ data for feeding into a DUT while simultaneously receiving IQ output from a DUT.To work together smoothly, the DUT, the R&S EX-IQ-Box and the R&S test instruments have to be configured properly. The purpose of Application Note 1MA168 is to introduce the right 'initial steps' required to get started successfully.

23-May-2012 | AN-No. 1MA168

Rohde & Schwarz signal generators can be connected in various ways to system controllers (typically PCs) and external PC peripherals. Although most of these connection operations are also explained in the instrument manuals, it is not always easy to maintain an overview. Operating manuals commonly focus on explaining a dedicated feature of a single instrument. This application note examines a range of typical user tasks and how to solve them with the different instruments.

26-Apr-2013 | AN-No. 1GP72

Rohde & Schwarz offers a complete test solution for WiMAX applications by combining its Signal Generator R&S SMU200A and Signal Analyzer R&S FSQ plus the appropriate options. This application note provides an overview of the differences between OFDM and OFDMA and demonstrates, how convenient it is to generate and analyze WiMAX OFDMA signals according to standard IEEE 802.16e-2005.

23-May-2007 | AN-No. 1EF58

This document describes how a Windows®-based R&S® T&M instrument is remotely operated by an Android™ tablet as if working on it locally. Step-by-step procedures are provided for setting up and configuring the T&M instrument and the tablet. On the tablet, a special App implements the Windows® 'Remote Desktop' functionality. T&M instrument and tablet are connected via WLAN (also called Wi-Fi network).

22-Aug-2013 | AN-No. 1MA236