78 Results
Title Versions Last Modified File Size Vector Network Analyzer Family ZVx - Firmware V.3.52 This Version is only for ZVM/ZVK and for ZVRx/ZVCx running under Windows NT ! (Please copy all files into an empty folder on your PC. Disk1.bin contains the files for Disk 1. Follow the instruction in one of the release notes. You need 5 formatted 3.5" disks.)
File DescriptionDateDriver rszv (4.3.4) history 17.11.2014 Driver NameSizeVersionDateLabVIEW 7.1 Driver rszv 3 MB4.3.4, 11/2014 17.11.2014 VXIplug&play x86 Driver rszv 1 MB4.3.4, 06/2003 13.06.2003 LabWindows/CVI Driver rszv 187 kB4.3.4 06/2003 13.06.2003 5. October 2004 History and release notes for ZVB Rohde & Schwarz 1 History and release notes for the Rohde&Schwarz Vector Network Analyzers ZVR
This application note describes how to directly transfer S-Parameter Trace Data from R&S Network Analyzers to Microsoft Excel using a direct connection like GPIB or LAN. Prerequisites are a PC running Microsoft Excel, a R&S Network analyzer like ZVA, ZVB or ZVT as well as a working remote control connection between PC and instrument like GPIB or LAN / Ethernet.
22-Mar-2007 | AN-No. RSI02
This document describes how the advanced calibration techniques of the ZVA Vector Network Analyzers can solve the challenges of measuring the S-Parameters on impedance matching devices. The document describes the concept and setup required to perform the calibration of the ZVA and making the measurement. The procedure described in this application note applies to the ZVB and ZVT Vector Network Analyzers as well.
06-May-2009 | AN-No. 1EZ59
Rohde & Schwarz instruments can be shared when users wish to use the same instrument. This can be done quite easily with the LAN interface, which comes as a standard option. Through this interface, Rohde & Schwarz instruments can be connected directly to a network, and users with access to the network can manually operate the instrument from a remote computer. This Application Note lists all instruments that support these features and describes the steps necessary to set up and configure the network connection to operate these instruments remotely.
05-Jul-2007 | AN-No. RAC-0703-0029
The option ZVR-B7 allows an enhanced power calibration of the source and of the receiver channels of a ZVR, then being active instead of the standard factory power calibration. Using an external power meter, the power level of input or output wave quantities will be adjusted to a desired value at an arbitrary reference plane.
29-Jul-1998 | AN-No. 1EZ41
This document describes typical measurements that are required to be made on amplifiers and how the measurement can be implemented on the ZVB Vector Network Analyzer. The document describes the concepts and setups required to perform Gain, Isolation, input impedance measurements, then goes on to describe how more uncommon measurements are made with the ZVB like Harmonics, Stability Factor and compression point.
07-Feb-2007 | AN-No. 1EZ54
This Application Note describes two programs for calculating conversions: 1.: The Power Unit Calculator Power, dBm, dBmV and Volts @ 50 W 2.: The VSWR Calculator Reflection, VSWR, Return loss and Power reflection Reflections, Reflectionl to Mismatch Uncertainty.
03-Jul-1998 | AN-No. 1MA12
This is a very special application note for all those who have seen the ZVatch (ZVR watch) and not really believed the nice red curve on its face. This curve can actually be generated with a Vector Network Analyzer ZVR.
25-Jan-2002 | AN-No. 1EZ28
A special requirement for testing GSM components is to measure the electrical characteristics, such as the gain of a power amplifier, of the DUT under pulsed conditions. The test should be similar to real operating conditions for a mobile telephone.
28-Jul-1998 | AN-No. 1EZ42