Speaker: Prof. Tony Quek, Associate Provost (AI & Digital Innovation), Director (FCP) & Chair Professor Singapore University of Technology and Design This talk highlights how the AI-RAN Alliance and Singapore’s Future Communications R&D Programme are advancing the integration of AI and RAN technologies to optimize networks, enhance platform utilization, and unlock new monetization opportunities. The

Our new, smart end-to-end campaign automation management feature substantially increases operational efficiency, orchestrates data collection, fleet management and post processing. It does this all while automating background tasks along the entire workflow, from data base and file management to report generation and distribution. Our new, smart end-to-end campaign automation management feature substantially

Simon is one of our hardware developers and tells us how much fun he has at Rohde & Schwarz. Simon is one of our hardware developers and tells us how much fun he has at Rohde & Schwarz. Systems, development, devices, future, components, work, job, career Simon is one of our hardware developers and tells us how much fun he has at Rohde & Schwarz.

Testing the RF interfaces of a cable modem with the cable modem ranging analysis function. Testing the RF interfaces of a cable modem with the cable modem ranging analysis function. R&S®DSA | DOCSIS cable modem ranging analysis | Rohde & Schwarz Prove the ranging functionality of a cable modem with the R&S®DSA. DOCSIS cable modem ranging analysis. Findout more.

In this example the 5G waveform uses one of the physical layer parameterization currently discussed in 3GPP RAN1. How to generate a 5G New Radio (NR) waveform? This video demonstrates the generation of a 5G NR waveform using the R&S®SMW200A vector signal generator and the R&S®SMW-K114 5G air interface candidates option from Rohde & Schwarz. In this example the 5G waveform uses one of the physical layer

Learn how to do low-speed serial bus decoding with the digital channels of the RTP The 16 digital channels of the MSO option extend the measurement resources of the RTP. Use them for protocol-based triggering and decoding of low-speed interfaces such as I2C, SPI, MIL1553 or MIPI RFFE. The 16 digital channels of the MSO option extend the measurement resources of the RTP. Use them for protocol-based

Check out R&S high-precision in-band radar testing solutions live from the show floor at CES 2022. Check out R&S high-precision in-band radar testing solutions live from the show floor at CES 2022. CES 2022, R&S high-precision in-band radar testing solutions Check out R&S high-precision in-band radar testing solutions live from the show floor at CES 2022.

R&S®MXO 3 - Fast. Precise. Compact Save time with the highly intuitive user interface and customizable Smart Grid with the R&S®MXO 3 compared to the Tektronix MDO3 Save time with the highly intuitive user interface and customizable Smart Grid with the R&S®MXO 3 compared to the Tektronix MDO3 R&S®MXO 3 SERIES OSCILLOSCOPE R&S®MXO 3 SERIES OSCILLOSCOPE Next generation oscilloscope: Fast. Precise. Compact

The low-noise frontend and 10 GHz single-core A/D converter are the foundation for the extraordinarily high measurement accuracy and dynamic range of the R&S®RTO oscilloscopes. The low-noise frontend and 10 GHz single-core A/D converter are the foundation for the extraordinarily high measurement accuracy and dynamic range of the R&S®RTO oscilloscopes. The high definition mode (HD mode) activates configurable

Discover how to use One Touch documention for serial buses using an R&S®RTM. Discover how to use One Touch documention for serial buses using an R&S®RTM RTM3000, one touch documentation, automotive Discover how to use One Touch documention for serial buses using an R&S®RTM.

Data throughput and dynamic scheduling are important parameters for 5G devices and require thorough testing during design phase. The video demonstrates how easy it is to setup and carry out these measurements with the unified user experience R&S®CMsquares. Data throughput and dynamic scheduling are important parameters for 5G devices and require thorough testing during design phase. The video demonstrates

Abhay is responsible for the test systems for location-based services and explains why there are no limits to learning at Rohde & Schwarz. Abhay is responsible for the test systems for location-based services and explains why there are no limits to learning at Rohde & Schwarz. Systems, development, devices, future, components, work, job, career Abhay is responsible for the test systems for location-based

Isolated probing system Learn about RT-ZISO safety features and effortless setup to transform your testing workflow. Learn about RT-ZISO safety features and effortless setup to transform your testing workflow. Oscilloscope, probe Safe to measure and easy to operate

Analysis of DOCSIS 3.0 downstream signals and digital TV signals. Analysis of DOCSIS 3.0 downstream signals and digital TV signals. R&S®DSA | SC-QAM downstream signal analysis | Rohde & Schwarz Optimize your DOCSIS HFC network with the R&S®DSA. SC-QAM downstream signal analysis. Findout more.

Demonstration of generating interferer signals, generating AWGN signals, applying realtime fading - all within a single instrument. Demonstration of generating interferer signals generating AWGN signals applying realtime fading ...all within a single instrument. Video, SMW200A, R&S®SMW200A - Interferer, AWGN Generation and Realtime Fading Simulation

The R&S®CMW100 communications manufacturing test set with a supported bandwidth of 160 MHz is ready for testing initial 5G NR sub-6 GHz wireless devices in production. 3GPP's 5G NR will support frequency ranges up to 52.6 GHz, but initial 5G designs will use frequencies below 6 GHz with focus on 3.5 GHz. For sub-6 GHz carrier frequencies, 3GPP currently discusses a maximum bandwidth per component carrier

Learn in this short video about R&S®ELEKTRA EMC test automation software how to create the reference calibration and the test report. The R&S®ELEKTRA test software controls complete EMC systems and automates measurements of equipment under test (EUT) being certified for emissions (EMI) and immunity (EMS). R&S®ELEKTRA simplifies configuration of test systems and test descriptions in accordance with

In this video we explore the test setup required to test 5G NR devices in non-standalone (NSA) mode using the R&S®CMX500 mobile radio tester from Rohde & Schwarz. 5G network deployments are underway worldwide and mobile devices supporting 5G are already commercially available. Those devices have to be tested from an R&D perspective, for protocol conformance, RF conformance, for mobility. In addition

MTSK2024 session - On the Verge of 6G MTSK2024 session - On the Verge of 6G MTSK2024 session - On the Verge of 6G

This video explains the LTE-U technology and demonstrates how to efficiently measure LTE signals in the 5 GHz unlicensed band on eNodeBs using the R&S®SMW200A vector signal generator and the R&S®FSW signal and spectrum analyzer from Rohde & Schwarz. This video explains the LTE-U technology and demonstrates how to efficiently measure LTE signals in the 5 GHz unlicensed band on eNodeBs using the R&S®

How to extend the frequency range of your spectrum analyzer? You can either use external harmonic mixers or invest in a new spectrum analyzer that covers the required frequency range. This video explains the differences between both methods and why a spectrum analyzer has a clear advantage compared to an external harmonic mixer. How to extend the frequency range of your spectrum analyzer? You can either

Learn more about the PR200 portable monitoring receiver and in particular synchronizing with 5G frame timing to effectively monitor and measure specific beams, on the spectrum display. Learn more about the PR200 portable monitoring receiver and in particular synchronizing with 5G frame timing to effectively monitor and measure specific beams, on the spectrum display. All key tasks in spectrum monitoring

Watch this video to learn about GMSL technology, its purpose, supported data speeds, and how tools like eye diagrams and signal integrity analysis ensure reliable in-vehicle network performance. Modern vehicles are packed with sensors such as cameras, radars, and LiDARs powering technologies like ADAS, autonomous driving, and advanced infotainment systems with multiple displays positioned throughout

QPS security screening solutions Learn more about the R&S®QPS technology, which has been tested by third-party labs and it has been conclusively demonstrated that its extremely low power is safe for human exposure. Learn more about the R&S®QPS technology, which has been tested by third-party labs and it has been conclusively demonstrated that its extremely low power is safe for human exposure. In fact

Christoph describes his challenges in the field of millimeterwave imaging. Christoph describes his challenges in the field of millimeterwave imaging. development, test, qps, millimeterwave imaging, job, career Christoph describes his challenges in the field of millimeterwave imaging.

R&S®MXO 4 - See the difference The R&S®MXO 4 series oscilloscopes offers a fully integrated two-channel 100 MHz arbitrary waveform generator with a wide range of waveforms and modulation types. The R&S®MXO 4 series oscilloscopes offers a fully integrated two-channel 100 MHz arbitrary waveform generator with a wide range of waveforms and modulation types. R&S®MXO 4 SERIES OSCILLOSCOPE, oscilloscope,

Watch this video to learn about achievable performance gains when using trained AI/ML models compared to traditional signal processing. With research on the technological components of the future 6G wireless communication standard in full swing, the possibilities of an AI-native air interface are also being explored. In collaboration with NVIDIA, Rohde & Schwarz takes another step forward and presents

How to launch the R&S®ELEKTRA software and use the configuration wizard to load preconsidered test information and setups. How to launch the R&S®ELEKTRA software and use the configuration wizard to load preconsidered test information and setups. R&S®ELEKTRA software, configuration wizard, setups. How to launch the R&S®ELEKTRA software and use the configuration wizard to load preconsidered test information

For early 6G R&D in the 110-170 GHz D-Band, R&S introduces FE170 Frontends Watch this video to get an introduction into 6G R&D in the 110-170 GHz D-Band and FE170 Frontends introduced by R&S. D band frequencies are significantly higher than the maximum frequency of any single box generators or analyzers currently available. With R&S®FE170 frontends, Rohde & Schwarz introduces innovative up- and down

Meet our employee Ann-Kathrin who talks about the biggest technical challenge in her job as a systems engineer. Meet our employee Ann-Kathrin who talks about the biggest technical challenge in her job as a systems engineer. system, engineering, technical, challenge, work, job, career Employee interview: System engineer Ann-Kathrin