Search

Find relevant information on products, solutions or downloads quickly by using our general search: Type in a keyword, choose a category and select from the active subcategories to get what you need.

Results 1 - 10 of 815 FSP

Did you find what you're looking for? If not, repeat the search on our International Website

  • R&S®FSP Spectrum Analyzer

    both development and production, featuring good level measurement uncertainty, as well as excellent RF characteristics. The R&S®FSP incorporates proven technology to enable best performance, reliability and ease of service.Frequency Range:FSP3: 9kHz (20Hz) to 3 GHzFSP7: 9kHz (20Hz) to 7 GHzFSP13: 9kHz (20Hz) to 13 GHzFSP30: 9kHz (20Hz) to 30 GHzFSP40: 9kHz (20Hz) to 40 GHzRF Performance:DANL typ.

    Products
  • Wireless Communications Testers & Systems - Test & Measurement

    Wireless Communications Testers & SystemsWireless device testers, infrastructure testers, protocol testers, conformance and preconformance testers and systems.To keep the backbone of mobile communications running, powerful mobile networks and mobile devices are needed.Rohde & Schwarz offers a full portfolio of wireless communication testers and systems for the complex measurements involved. The

    Products
  • Signal & Spectrum Analyzer - Test & Measurement

    ®FSW-K18D Direct DPD measurementsR&S®FSUP Signal Source AnalyzerMore Information? Please contact us.R&S®FSU Spectrum Analyzer Please note the following successor product(s):R&S®FSW signal and spectrum analyzerR&S®FSQ Signal Analyzer Please note the following successor product(s):R&S®FSW signal and spectrum analyzerR&S®FSP Spectrum Analyzer Please note the following successor product(s):R&S®FSV

    Products
  • R&S®FSP-K93 WiBro Application Firmware

    R&S®FSP-K93 WiBro Application FirmwareSpectrum and modulation measurements on OFDMA WiBro signalsOverview Key FactsWith the R&S®FSP-K93 application firmware, the R&S®FSP spectrum analyzer can be used for spectrum and modulation measurements on OFDMA WiBro signals in accordance with the IEEE 802.16e-2005 standard, also known as WiMAX. Its functions cover standard related tests. Key FactsWith the

    Products
  • R&S®FSP-K90 WLAN 802.11a Application Firmware

    R&S®FSP-K90 WLAN 802.11a Application FirmwareTransmitter measurements on WLAN 802.11a/g OFDM signals with the Signal Analyzer R&S FSPOverview Key Facts Frequency range: 9 kHz to 3/7/13/30/40 GHz Analysis at the RF Supports 801.11a, 802.11g (OFDM) Very low residual EVM of -43/-41 dB Key FactsThe Application Firmware R&S® FSP-K90 expands the application range of the Signal Analyzers R&S® FSP by

    Products
  • Spectrum Analyzer FSP

    background) in performance The FSP family comprises four analyzers with different frequency ranges: FSP3 9 kHz to 3 GHz FSP7 9 kHz to 7 GHz FSP13 9 kHz to 13 GHz FSP30 9 kHz to 30 GHz Thus optimum frequency range can be offered for each application, whether RF or micro-wave. Photo 43 446 Articles 4 News from Rohde&Schwarz Number 166 (2000/I) the last IF voltage or video voltage, and processing of

  • Verification & Conformance Testing

    Verification & Conformance TestingBuilding on its many years of experience in wireless communications test and measurement, Rohde & Schwarz can offer a complete portfolio of sophisticated solutions for the approval process of wireless devices. Solutions from Rohde & Schwarz reliably cover the test requirements of all conventional standardization, regulatory and certification bodies, as well as

    Products
  • R&S®FSP Operating Manual

    Describes all instrument functions and remote control commands, including measurement and programming examples, for the base unit. Also describes some general functions that apply to several applications

  • FSP and FS-K3

    FSP and FS-K3QuestionIs it possible to use Noise Measurement Software FS-K3 with FSP?AnswerApplication software FS-K3 (>= version 2.11) can be used together with the FSP.The software runs either on an external PC or directly on the FSP. If the software is operated on the FSP, it is not possible to control additionally an external generator for measurements on frequency-converting DUTs.The settling time in the DEVICE menu of the FS-K3 software has to be adjusted to 200 ms.

  • R&S®FSP-B30, R&S®FSP-B31, R&S®FSP-B32 Operating Manual

    Describes how to work with the power supplies.For information on operating the R&S®FSP see the user manual of the base unit.

Results 1 - 10 of 815
Previous  1  2  3  4  5  6  7  8  9  10  Next
Thank you.

Your request was successfully sent!

We will get in touch with you soon.

Your Rohde & Schwarz Team

Download

Please enter your first name.

Please enter a valid email address.

Please enter your name.

Please enter your company name.

Please enter your location.

Marketing permission
Please enter the characters shown in the image
show captcha

The input was not correct.
International Website