ZPH R&S®Cable Rider

Expect fast, expect efficient

ZPH R&S®Cable Rider
Open Lightbox
ZPH R&S®Cable Rider
Open Lightbox
ZPH R&S®Cable Rider
Open Lightbox
ZPH R&S®Cable Rider
Open Lightbox
ZPH R&S®Cable Rider
Open Lightbox
ZPH R&S®Cable Rider
Open Lightbox
R&S®ZPH Cable Rider, front viewR&S®ZPH Cable Rider, side viewR&S®ZPH Cable Rider, side viewR&S®ZPH Cable Rider, back viewR&S®ZPH Cable Rider, side viewR&S®ZPH Cable Rider, application Image

Key facts

  • Frequency range up to 3 GHz or 4 GHz, upgrade via keycode
  • One-port model features: DTF, return loss, VSWR and cable loss measurements
  • Two-port model additionally features S21 measurements, spectrum and interference analysis, AM/FM/ASK/FSK demodulation
  • Ideal for field use: up to 9-hour battery life, 2.5 kg (5.5 lb), backlit keypad, fast boot time, non-reflective display, small form factor, ruggedized housing (IP51)
  • 3-year warranty extension
  • Spectrum and vector network analyzer promotion

Brief description

The R&S®Cable Rider ZPH has all the essential basic measurement capabilities required for installing and maintaining antenna systems in the field. Its unique features ensure fast and efficient cable and antenna measurements and spectrum analysis. Two different R&S®ZPH models meet different needs: a pure one-port cable and antenna analyzer and a two-port model with additional spectrum analysis and tracking generator features.

Features & benefits

Fast

Fast operation with the R&S®Cable Rider ZPH  

The R&S®Cable Rider ZPH boots up in less than 15 seconds and only needs 1 minute to warm up and can therefore begin measurement almost instantly.
The analyzer’s extremely fast measurements are the best in its class. The configuration overview menu allows you to view and change all parameter settings with just one keystroke. The fast synthesizers in the analyzer speed up measurements to 0.3 milliseconds per point.

Set parameters quickly in the overview menu
Open Lightbox

Set parameters quickly in the overview menu

Ideal for fast base station installation and maintenance: the R&S®Cable Rider ZPH

Efficient

Efficient operation with the R&S®Cable Rider ZPH  

Downtime-free operation is efficient operation.
With a single full charge, the R&S®Cable Rider ZPH lasts an entire working day without needing to recharge or change the batteries.
If tasks require additional options, these can be purchased and activated without needing to send the analyzer to the service lab for an upgrade or recalibration.

Efficient operation with the R&S®Cable Rider ZPH
Open Lightbox

Efficient operation with the R&S®Cable Rider ZPH

R&S®Cable Rider ZPH with the R&S®ZN-Z103 calibration unit

Cable and antenna tester

Key capabilities for base station installation  

All R&S®Cable Rider ZPH models share the same cable and antenna testing DNA: distance-to-fault, VSWR and one port cable loss measurement are supported, as well as phase and Smith chart displays for measurements.

R&S®Cable Rider ZPH
Open Lightbox

R&S®Cable Rider ZPH

Base station maintenance with the R&S®Cable Rider ZPH

Spectrum analyzer

Additional features for spectrum analysis  

Field engineers often need multiple instruments to complete their tasks: a cable and antenna analyzer, a spectrum analyzer, a signal generator and a bias source. All can now be found in a single powerful box with the added features of the R&S®Cable Rider ZPH combi analyzer (model .12.) The spectrum analyzer model also contains further measurement features, such as interference analysis and signal strength mapping.

R&S®Cable Rider ZPH with R&S®HA-Z900
Open Lightbox

R&S®Cable Rider ZPH with R&S®HA-Z900

Interference hunting with R&S®Cable Rider ZPH and directional antenna R&S®HA-Z900

Calibration

One-step calibration  

Calibration is only recommended if there are additional cables or adapters connected in between the analyzer and the device under test (DUT). This eliminates any influences on the measurement.
For convenient, one-step calibration, the R&S®ZN-Z103 calibration unit automatically switches internally between OPEN, SHORT and LOAD. This saves time and eliminates the hassle of physically changing the different calibration standards in the field.

R&S®ZN-Z103 calibration unit
Open Lightbox

R&S®ZN-Z103 calibration unit

Portability

Weighs only 2.5 kg  

With its ergonomic design, the R&S®Cable Rider ZPH has a small form factor and is lightweight. It comes with a convenient side strap to support your hand during the short measurement period. For hands-free operation, the holster (R&S®HA-Z322) comes with a harness that is carefully designed to equally distribute the weight around the body.

Hands-free operation with the R&S®HA-Z322 holster
Open Lightbox

Hands-free operation with the R&S®HA-Z322 holster

Durability

A single charge lasts for a day’s work  

The R&S®Cable Rider ZPH will operate for an entire working day on a single charge. Simply charge it for approximately 4 hours and the lithium-ion battery pack will last up to 9 hours. The advantages of long battery life are obvious: the weight of an extra battery can be saved when climbing up a mast or tower and there’s no frustration due to the battery running out during a measurement.

Handheld analyzer battery operation time
Open Lightbox

Handheld analyzer battery operation time

R&S®Cable Rider ZPH lasts longer then any other handheld analyzer on a single charge

Usability

Touchscreen gestures, non-reflective screen and backlit keypad  

To enhance user experience, the user interface operates like a smartphone. The touchscreen is not limited to the menu bar; it also allows users to move the spectrum, zoom in and out of the span, add/delete markers, etc.

Non-reflective screen and backlit keypad
Open Lightbox

Non-reflective screen and backlit keypad

The non-reflective screen makes outdoor work easier even in bright sunlight and you can also continue working though the night or under dim conditions thanks to the backlit keypad

Available models

Available models
Models
Ports
Connectors
Starting at

R&S®ZPH

Order number 1321.1211K02

Ports
1.0
Connectors
N-type
Starting at
Price On Request

R&S®ZPH

Order number 1321.1211K12

Ports
2.0
Connectors
N-type
Starting at
Price On Request
Specifications
Frequency range
R&S®Cable Rider ZPH (1-port model .02)2 MHz to 3 GHz
with R&S®ZPH-B4 option2 MHz to 4 GHz
R&S®Cable Rider ZPH (2-port combi model .12)with R&S®ZPH-K1 option5 kHz to 3 GHz
with R&S®ZPH-B4 and R&S®ZPH-K1 options5 kHz to 4 GHz
Frequency resolution1 Hz
Spectrum measurement with combi model .12 only, with R&S®ZPH-K1 option
Spectral purity, SSB phase noisef = 500 MHz, carrier offset 30 kHz< –88 dBc (1 Hz), typ. –95 dBc (1 Hz)
f = 500 MHz, carrier offset 100 kHz< –98 dBc (1 Hz), typ. –105 dBc (1 Hz)
f = 500 MHz, carrier offset 1 MHz< –118 dBc (1 Hz), typ. –125 dBc (1 Hz)
Displayed average noise level (DANL)0 dB RF attenuation, termination 50 Ω, RBW = 1 kHz, VBW = 10 Hz, sample detector, log scaling, normalized to 1 Hz
frequency preamplifier = off
1 MHz to 10 MHz< –130 dBm, typ. –135 dBm
10 MHz to 1 GHz< –142 dBm, typ. –146 dBm
1 GHz to 4 GHz< –140 dBm, typ. –144 dBm
frequency preamplifier = on
1 MHz to 10 MHz< –150 dBm, typ. –160 dBm
10 MHz to 3 GHz< –158 dBm, typ. –163 dBm
3 GHz to 4 GHz< –156 dBm, typ. –161 dBm
Maximum permissible spurious signal
Maximum permissible spurious signalmeasurement = reflection (S11)/one-port cable loss/distance-to-fault analysis+17 dBm (nom.)
Data pointsselectable101 to 2501
Reflection measurement S11
Corrected directivity with R&S®ZN-Z1032 MHz ≤ f ≤ 4 GHz (with R&S®ZPH-B4 option installed)> 42 dB (nom.)
Measurement speed0.3 ms/point
Result formatsmagnitude, VSWR, magnitude and distance-to-fault, VSWR and distance-to-fault
1-port cable loss measurement
Result formatmagnitude
Rangeselectable1/2/5/10/20/50/100/120/150 dB
Distance-to-fault analysis
Result formatsreturn loss (dB), VSWR
Fault resolution(1.5 m × 108 m × velocity factor/span)
Maximum cable lengthdepending on cable loss1500 m (nom.)
Maximum rated input levels
DC voltage50 V
CW RF powermodel .02: port 1 (power meter input)30 dBm
model .12: port 1 (RF input)20 dBm
port 2 (reflectometer input)23 dBm
General data
Display resolutionWVGA800 × 480 pixel
Battery (R&S®HA-Z306 option)capacity72 Wh
voltage11.25 V (nom.)
operating time with new, fully charged batteryup to 9 hrs
DimensionW × H × D202  mm × 294 mm × 76 mm
(8.0 in × 11.6 in × 3 in)
Weight2.5 kg (5.5 lb)

Available options

Performance
Product
Description
R&S®ZPH-B4

Order number 1321.0380.02

Description

Frequency Upgrade

R&S®ZPH-B22

Order number 1334.5627.02

Description

Preamplifier

General purpose
Product
Description
R&S®ZPH-K1

Order number 1334.5604.02

Description

Spectrum analysis measurement application

R&S®ZPH-K7

Order number 1334.5633.02

Description

Modulation analysis AM/FM

(requires R&S®ZPH-K1)

R&S®ZPH-B10

Order number 1321.0396.02

Description

GPS Support

R&S®ZPH-K9

Order number 1321.0415.02

Description

Power Sensor Support

R&S®ZPH-K19

Order number 1321.0409.02

Description

Channel Power Meter

R&S®ZPH-K105

Order number 1334.7207.02

Description

EMF Measurement Applications

Radar
Product
Description
R&S®ZPH-K29

Order number 1321.0421.02

Description

Pulse Measurements with Power Sensor

Interference analysis
Product
Description
R&S®ZPH-K15

Order number 1334.5640.02

Description

Interference Analysis

(requires R&S®ZPH-K1)

R&S®ZPH-K16

Order number 1334.5656.02

Description

Signal strength mapping measurement application

(requires R&S®ZPH-K1)

Related videos

Fast and efficient cable and antenna measurement in the field

When installing and maintaining mobile communications antenna systems, the key is to perform one-port measurements quickly and correctly the first time.The Rohde & Schwarz R&S®ZPH is the fitting tool for fast and efficient measurement tasks in the field.

17-Jun-2021

Deep dive into CERTIUM ANALYSIS

Rohde & Schwarz' wide portfolio of RF and digital test & measurement solutions to both set up and maintain the entire ATC communication chain.

14-Apr-2021

Using FPH Gated Trigger Settings For a Live 5G Signal

With R&S®Spectrum Rider FPH or R&S®Cable Rider ZPH (v.12 model with ZPH-K1 option) gated trigger feature, it is possible to mask out the downlink signal and focus on the uplink activities.

22-Jul-2020

R&S®ZPH product feature video

The R&S®Cable Rider ZPH is a one-port analyzer that has all the essential basic measurement capabilities required for installing and maintaining antenna systems in the field.

22-Feb-2019

R&S®ZPH product video

The R&S®Cable Rider ZPH is a one-port analyzer that has all the essential basic measurement capabilities required for installing and maintaining antenna systems in the field.

09-Oct-2018

Cost-efficient handheld tester for site installation and maintenance presented at GSMA MWC 2017

Rohde & Schwarz presented its latest one-port cable and antenna analyzer at the GSMA Mobile World Congress 2017 in Barcelona.

12-Jul-2018

Further information

Spectrum & Vector network analyzers promotion

Spectrum & Vector network analyzers promotion

Widest variety of fully equipped products up to 36% off.

More information

Mobile network testing

Mobile network testing

Mobile network testing solutions from Rohde & Schwarz let you reconcile your current and future dilemmas.

More information

Teaching-Software for Multi-User Student Labs

Teaching-Software for Multi-User Student Labs

The R&S®CDS campus dashboard software simplifies teaching of student groups in laboratories with multiple workbenches.

More information

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Marketing permission

Your request has been sent successfully. We will contact you shortly.
An error is occurred, please try it again later.
General and legal information

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Terms & Conditions of the Prize Draw 10 years Rohde & Schwarz oscilloscopes

1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).

2. All participators can register to the draw during January 01, 2020 to December 31, 2020 with their name, company name and business e-mail.

3. Participation is free of charge and not dependent on the purchase of goods or services.

4. The draw is only open to legal entities and only the legal entities are able to win the prizes. An individual person is not allowed to participate on its own name and its own account but as a representative of a legal entity filing the participation form in the name of and on behalf of the legal entity.

5. The prizes to win are 1 of 10 R&S®RTB2000 within the time frame January 1, 2020 to December 31, 2020:

Prize: 1x R&S®RTB2000 Digital Oscilloscope

6. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich. The winner of the prizes will be informed by e-mail within 5 (5) working days.

7. The authorized representative of the legal entity shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.

8. R&S’ employees and members of their families and also person being familiar with the process of the draw and members of their families are excluded from filling the participation form.

9. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.

10. Personal data will be processed only for the purpose of this prize draw and deleted four (4) weeks after the draw, if not agreed otherwise.

11. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Competition. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn.

12. The participants cannot claim the prizes of this draw and no legal recourse is permitted in this respect.

13. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Competition.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.