R&S®ZRXxxx receiver

Millimeterwave receiver modules with highest dynamic range

R&S®ZRXxxx receiver
Open Lightbox
R&S®ZRXxxx receiver
Open Lightbox
R&S®ZRXxxx receiver
Open Lightbox
R&S®ZRXxxx receiver
Open Lightbox
R&S®ZRXxxx receiver
Open Lightbox
R&S®ZRXxxx receiver
Open Lightbox
R&S®ZRXxxx receiver, Front Low R&S®ZRXxxx receiver, Front view R&S®ZRXxxx receiver, Hero view R&S®ZRXxxx receiver, Front High R&S®ZRXxxx receiver, Front High R&S®ZRXxxx receiver, Side view

Key facts

  • For use with the R&S®ZNA, R&S®ZVA, R&S®ZVT20 and R&S®ZCxxx converters
  • Highest dynamic range
  • For antenna measurement setups or unidirectional S-parameter measurements

Millimeterwave receiver modules with highest dynamic range

The R&S®ZRXxxx millimeterwave receiver modules can be used with the R&S®ZNA, R&S®ZVA and R&S®ZVT. The receivers are available from 50 GHz to 1100 GHz. In combination with a ZCxxx converter, the setup provides the highest dynamic range for antenna measurements, but can also be used for unidirectional S-parameter measurements.

Features & benefits

Highest dynamic range

In combination with R&S®ZCxxx converters, the R&S®ZCxxx receivers provide the highest dynamic range for antenna measurement setups. For frequencies between 60 and 110GHz a dynamic range of 150dB is possible.

Unidirectional S-parameter measurements

Unidirectional S-parameters can be applied in combination with a R&S®ZCxxx converter. In order not to saturate the receiver, a fixed waveguide attenuator comes standard with the R&S®ZRXxxx.

Available models

Available models
Models
Upper frequency
Test port

R&S®ZRX90

Order number 3658.5368.02

Upper frequency
90 GHz
Test port
WR12

R&S®ZRX110

Order number 3637.1511.02

Upper frequency
110 GHz
Test port
WM-2540 (WR10)

R&S®ZRX140

Order number 3637.1528.02

Upper frequency
140 GHz
Test port
WM-2032 (WR8.0)

R&S®ZRX170

Order number 3622.0737.02

Upper frequency
170 GHz
Test port
WM-1651 (WR6.5)

R&S®ZRX220

Order number 3622.0743.02

Upper frequency
220 GHz
Test port
WM-1295 (WR5.1)

R&S®ZRX260

Order number 3622.0750.02

Upper frequency
260 GHz
Test port
WM-1092 (WR4.3)

R&S®ZRX330

Order number 3622.0766.02

Upper frequency
330 GHz
Test port
WM-864 (WR3.4)

R&S®ZRX400

Order number 3658.5374.02

Upper frequency
400 GHz
Test port
WM-710

R&S®ZRX500

Order number 3622.0772.02

Upper frequency
500 GHz
Test port
WM-570

R&S®ZRX750

Order number 3658.5745.02

Upper frequency
750 GHz
Test port
WM-380

R&S®ZRX1100

Order number 3658.5868.02

Upper frequency
1100 GHz
Test port
WM-250

Available options

General
Product
Description
R&S®ZCPS

Order number 1325.6101.02

Description

Converter power supply (supplies two converters)

R&S®ZCPSC

Order number 1323.8159.12

Description

Power Supply Cable 1.2 m

R&S®ZCPSC

Order number 1323.8159.16

Description

Power Supply Cable 1.6 m

R&S®ZCPSC

Order number 1323.8159.20

Description

Power Supply Cable 2 m

Waveguide calibration kits
Product
Description

Order number 1307.7500.30

Description

Waveguide calibration kit WR15, 50 GHz to 75 GHz (without sliding match)

Order number 1307.7500.31

Description

Waveguide calibration kit WR15, 50 GHz to 75 GHz (with sliding match)

Order number 1307.7700.10

Description

Waveguide calibration kit WR12, 60 GHz to 90 GHz (without sliding match)

Order number 1307.7700.11

Description

Waveguide calibration kit WR12, 60 GHz to 90 GHz (with sliding match)

Order number 1307.7100.10

Description

Waveguide calibration kit WR10, 75 GHz to 110 GHz (without sliding match)

Order number 1307.7100.11

Description

Waveguide calibration kit WR10, 75 GHz to 110 GHz (with sliding match)

Order number 1307.7900.10

Description

Waveguide calibration kit WR08, 90 GHz to 140 GHz (without sliding match)

Order number 1307.7900.11

Description

Waveguide calibration kit WR08, 90 GHz to 140 GHz (with sliding match)

Order number 1311.8807.10

Description

Waveguide calibration kit WR06, 110 GHz to 170 GHz (without sliding match)

Order number 1311.8807.11

Description

Waveguide calibration kit WR06, 110 GHz to 170 GHz (with sliding match)

Order number 1307.8106.10

Description

Waveguide calibration kit WR05, 140 GHz to 220 GHz (without sliding match)

Order number 1307.8106.11

Description

Waveguide calibration kit WR05, 140 GHz to 220 GHz (with sliding match)

Order number 3628.5699.02

Description

Waveguide calibration kit WM-1092, 170 GHz to 260 GHz 

Order number 1307.7300.30

Description

Waveguide calibration kit WR03, 220 GHz to 325 GHz (without sliding match)

Order number 1307.7300.31

Description

Waveguide calibration kit WR03, 220 GHz to 325 GHz (with sliding match)

Order number 1339.4070.02

Description

Waveguide calibration kit WM-710, 260 GHz to 400 GHz 

Order number 1322.3099.10

Description

Waveguide calibration kit WM-570, 330 GHz to 500 GHz 

for R&S®ZC500

Order number 1314.5550.10

Description

Waveguide calibration kit WR02, 325 GHz to 500 GHz

for R&S®ZVA-Z500

Order number 1322.3101.02

Description

Waveguide calibration kit WM-380, 500 GHz to 750 GHz 

Order number 1322.3118.02

Description

Waveguide calibration kit WM-250, 750 GHz to 1100 GHz 

General analysis
Product
Description

Order number 1332.5388.02

Description

Converter Control Software

(for R&S®ZNA, R&S®ZVA-Zxxx, R&S®ZCxxx)

Order number 1307.7022.02

Description

  Freq. Converter Control

(for R&S®ZVA24/40/50/67)

General accessories
Product
Description
R&S®ZVAB-B44

Order number 1302.5544.02

Description

USB-to-IEC/IEEE adapter

(for control of external devices via IEC/IEEE bus)

R&S®ZCSTC

Order number 1323.7730.00

Description

Converter set transport case

R&S®ZV-Z1118

Order number 1314.5373.00

Description

Adapter SMA m/m angle

0 Hz to 18 GHz

R&S®ZV-Z1218

Order number 1314.5380.00

Description

Adapter SMA m/f angle

0 Hz to 18 GHz

R&S®ZV-Z1227

Order number 1307.0886.02

Description

2-way Wilkinson power divider

4 GHz to 27 GHz

R&S®ZCAK

Order number 1323.7746.24

Description

Adapter kit

including a power divider and two right angle SMA (m/m) adapters (required if R&S®ZVA24 var. 28 or R&S®ZVA40 var. 48 (VNAs with four sources) is used)

R&S®ZCAK

Order number 1323.7746.50

Description

Adapter kit

including four 1.85 mm (f) to 2.92 mm (m) adapters and four 1.85 mm (m) to 2.92 mm (f) adapters (required if R&S®ZVA50 is used)

R&S®ZCAK

Order number 1323.7746.67

Description

Adapter kit

including a power divider, two right angle SMA (m/m) adapters, three 1.85 mm (f) to 2.92 mm (m) adapters and four 1.85 mm (m) to 2.92 mm (f) adapters (required if R&S®ZVA67 is used)

Wrenches
Product
Description
R&S®ZV-Z1000

Order number 1314.5467.02

Description

Torque wrench for waveguide flange screws

R&S®ZCAW

Order number 1175.1960.00

Description

Angled wrench for waveguide flange screws

R&S®ZCTW

Order number 1175.2014.02

Description

Torque wrench for waveguide flange screws

R&S®ZCTW

Order number 1175.2014.03

Description

Torque wrench for waveguide flange screws

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

I want to receive information from Rohde & Schwarz via

Marketing permission

What does this mean in detail?

I agree that Rohde & Schwarz GmbH & Co. KG and the Rohde & Schwarz entity or subsidiary company mentioned in the imprint of this website, may contact me via the chosen channel (email or postal mail) for marketing and advertising purposes (e.g. information on special offers and discount promotions) related to, but not limited to, products and solutions in the fields of test and measurement, secure communications, monitoring and network testing, broadcast and media, and cybersecurity.

Your rights

This declaration of consent may be withdrawn at any time by sending an email with the subject "Unsubscribe" to news@rohde-schwarz.com. Additionally, a link to unsubscribe from future email advertisements is contained in each email sent. Further details on the use of personal data and the withdrawal procedure are set out in the Statement of Privacy.

Your request has been sent successfully. We will contact you shortly.
An error is occurred, please try it again later.
General and legal information

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

Terms & Conditions of the Prize Draw 10 years Rohde & Schwarz oscilloscopes

1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).

2. All participators can register to the draw during January 01, 2020 to December 31, 2020 with their name, company name and business e-mail.

3. Participation is free of charge and not dependent on the purchase of goods or services.

4. The draw is only open to legal entities and only the legal entities are able to win the prizes. An individual person is not allowed to participate on its own name and its own account but as a representative of a legal entity filing the participation form in the name of and on behalf of the legal entity.

5. The prizes to win are 1 of 10 R&S®RTB2000 within the time frame January 1, 2020 to December 31, 2020:

Prize: 1x R&S®RTB2000 Digital Oscilloscope

6. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich. The winner of the prizes will be informed by e-mail within 5 (5) working days.

7. The authorized representative of the legal entity shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.

8. R&S’ employees and members of their families and also person being familiar with the process of the draw and members of their families are excluded from filling the participation form.

9. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.

10. Personal data will be processed only for the purpose of this prize draw and deleted four (4) weeks after the draw, if not agreed otherwise.

11. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Competition. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn.

12. The participants cannot claim the prizes of this draw and no legal recourse is permitted in this respect.

13. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Competition.