VNA pulsed measurements

VNA pulsed measurements
Open Lightbox
VNA pulsed measurements, Application Image

Key facts

  • Integrated Pulse Modulators and Pulse Generators
  • Minimum Generator Pulse Width 8 ns
  • Minimum Modulator Pulse Width 40 ns
  • Up to 8 internal Pulse Generators
  • Up to 4 internal Pulse Modulators

VNA pulsed measurements - fast and easy

There are several reasons to characterize RF components under pulsed conditions. Often it is to prevent thermal damage to the device under test or to characterize it under operating conditions. Vector Network Analyzers offer integrated hardware and software for accurate device characterization under pulsed conditions. This hardware includes built-in pulse modulators, pulse generators and synchronization IO including for external device control. S‑parameters, input and output powers and intermodulation products can be measured without any external components to generate RF pulses and synchronize test sequences.

Features & benefits

Internal Pulse Modulators and Pulse Generators

Fully integrated setup and assured validity of the system error correction

1. R&S®ZNA one pulse modulator per port
2. R&S®ZNA 4 internal pulse generators for modulator control
3. R&S®ZNA 4 additional internal pulse generators via B91 interface
4. R&S®ZVA 2 internal pulse generators
5. R&S®ZVA: Signal conditioning unit R&S®ZVAX-TRM  pulse modulators for Ports 1, 2 and 3

Open Lightbox

Pulse Measurements vs Frequency and Power

Support for pulsed applications such as wideband (point-in-pulse), narrowband (average) and pulse profile measurements.

1. Highly selective IF digital filters for average pulse measurements.
2. High dynamic range for wideband pulse analysis
3. Up to 30 MHz of IF bandwidth available for wideband and M19pulse profile measurements

Open Lightbox

Point-in-Pulse Measurements (wide-band)

Short measurement times of up to 40 ns

1. Wide  IFBW up to 30 MHz with option ZNA-K17
2. S-parameters, absolute peak power in amplitude and intermodulation measurements 
3. Flexible trigger functions supporting complex pulsed measurement scenarios and facilitating synchronization of measurements.

Open Lightbox

Pulse Profile Analysis vs Time

Useful insights into the Pulse Shape

1. Wide IFBW up to 30 MHz
2. Support for periodic, non-periodic and one-shot pulse scenarios
3. Short pulse widths up to 40 ns
4. Pulse Rise Time resolution up to 20 ns

Open Lightbox

Available models

Available models
Models
Supported VNA
Integrated pulse generators / Modulators
Minimum generator / Modulator pulse width
Pulse modulator rise time
Minimum measureable pulse width
Maximum available IF bandwidth

R&S®ZNA-K7

Order number 1332.5371.02

Supported VNA
Integrated pulse generators / Modulators
Up to 8 internal / Up to 4 internal
Minimum generator / Modulator pulse width
8 ns / 40 ns
Pulse modulator rise time
20 ns
Minimum measureable pulse width
32 ns
Maximum available IF bandwidth
30 MHz with ZNA-K7
30 MHz with ZNA-K17

R&S®ZVA-K7

Order number 1164.1511.02

Supported VNA
Integrated pulse generators / Modulators
Up to 2 internal / Up to 3 internal
ZVAX-TRM required
Minimum generator / Modulator pulse width
12,5 ns / 10 ns (typ.)
Pulse modulator rise time
1 ns (typ.)
Minimum measureable pulse width
420 ns
Maximum available IF bandwidth
30 MHz with ZVA-K7
5 MHz with  ZVA-K17

Available options

Pulse, EMI and EMF measurements
Product
Description
R&S®ZNA-K17

Order number 1332.5459.02

Description

Increased IF bandwidth up to 30 MHz

for R&S®ZNA

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

I want to receive information from Rohde & Schwarz via

Marketing permission

What does this mean in detail?

I agree that Rohde & Schwarz GmbH & Co. KG and the Rohde & Schwarz entity or subsidiary company mentioned in the imprint of this website, may contact me via the chosen channel (email or postal mail) for marketing and advertising purposes (e.g. information on special offers and discount promotions) related to, but not limited to, products and solutions in the fields of test and measurement, secure communications, monitoring and network testing, broadcast and media, and cybersecurity.

Your rights

This declaration of consent may be withdrawn at any time by sending an email with the subject "Unsubscribe" to news@rohde-schwarz.com. Additionally, a link to unsubscribe from future email advertisements is contained in each email sent. Further details on the use of personal data and the withdrawal procedure are set out in the Statement of Privacy.

Your request has been sent successfully. We will contact you shortly.
An error is occurred, please try it again later.
General and legal information

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

Terms & Conditions of the Prize Draw 10 years Rohde & Schwarz oscilloscopes

1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).

2. All participators can register to the draw during January 01, 2020 to December 31, 2020 with their name, company name and business e-mail.

3. Participation is free of charge and not dependent on the purchase of goods or services.

4. The draw is only open to legal entities and only the legal entities are able to win the prizes. An individual person is not allowed to participate on its own name and its own account but as a representative of a legal entity filing the participation form in the name of and on behalf of the legal entity.

5. The prizes to win are 1 of 10 R&S®RTB2000 within the time frame January 1, 2020 to December 31, 2020:

Prize: 1x R&S®RTB2000 Digital Oscilloscope

6. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich. The winner of the prizes will be informed by e-mail within 5 (5) working days.

7. The authorized representative of the legal entity shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.

8. R&S’ employees and members of their families and also person being familiar with the process of the draw and members of their families are excluded from filling the participation form.

9. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.

10. Personal data will be processed only for the purpose of this prize draw and deleted four (4) weeks after the draw, if not agreed otherwise.

11. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Competition. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn.

12. The participants cannot claim the prizes of this draw and no legal recourse is permitted in this respect.

13. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Competition.