Documents & Articles Search

The Rohde & Schwarz documents & articles offer a variety of information material.

Results 1 - 10 of 108 for romes
  • Operating Manuals for ROMES

    Operating Manuals for ROMESQuestionI found that my ROMES operating manual seems to have an older status than my current ROMES software. Is there always a new operating manual created with new software releases and how can I get a new manual after software updates ?AnswerWe do not create new manuals for each new version, but update them at irregular intervals. Here an overview of the existing

  • Coverage Measurement Software ROMES 3

    Coverage Measurement Software ROMES 3Communication with seamless coverage and without interference, reliable data transmission at an acceptable speed these and many other quality criteria are decisive for the success of a mobile-radio network on the market. To enable network operators to provide the required quality - and thus be commercially successful - Rohde & Schwarz offers with its TS995x

  • Expiration date for a ROMES dongle

    Expiration date for a ROMES dongleQuestionHow can I find out the expiration date of my time-limited ROMES dongle?AnswerFollow the steps shown below (works with the ROMES dongle on the PC):On the ROMES DVD:Open the folder: ad onsOpen the folder: Licence server guiOpen the file: LicCentralgui.exePassword: cancelThis will open the program and show the "Licence valid until / expiration date"ROMES itself will also show a message if the remaining time is less than 30 days.

  • Remote Control of ROMES on Windows 7

    For optimization of mobile communication networks, drive tests with coverage measurement systems are being performed. The coverage measurement platform provided by Rohde & Schwarz is based on R&S® ROMES, which is the application software to define and setup measurement devices, acquire and store the measurement data and displaying measured data during the measurement period and a later replay. Additional drivers are used for attaching different measurement devices, such as the Rohde & Schwarz Universal Radio Network Analyzers TSMQ or TSMW or test mobiles from different manufacturers. Depending on the required measurement tasks, R&S® ROMES can be configured freely to adapt to the user’s needs. As long as the measurements are performed in an outdoor environment using a vehicle traveling around, size and weight of the measurement system is not a problem. As more and more measurements are performed in an indoor environment by walking around, size, weight and mechanical handling is an issue of interest. ROMES® can be used in a light weight configuration, which is small enough to be carried in a back pack. For use of R&S® ROMES with R&S® TSMW in an indoor environment, the Backpack System R&S® TSMW-Z3 has been designed. The system includes a mini PC with R&S® ROMES which needs to be controlled remotely. This application note describes, how to establish a Wireless Lan Access Point on the R&S® ROMES PC and to setup a wireless LAN connection between an Apple iPad® and the mini PC.

  • How to add new options to ROMES

    How to add new options to ROMESQuestionI ordered additional options for ROMES and received a new option file that contains the concerning new licences. But although I copied this file correctly to the application directory, where also the old one was located, I can't find the new options.AnswerDuring the installation of ROMES, the option file gives you the information on the options (especially

  • ROMES update version 3 -> version 4

    ROMES update version 3 -> version 4QuestionError message during ROMES update version 3 -> version 4 - TSMXAnswerWhen updating ROMES version 3 to version 4, the Firewire driver must also be updated.This procedure is described in the attached file TSMx_Firewire.pdfThe drivers are also available on the ROMES v4.10 DVD.The necessary drivers are contained in the attached file Firmware

  • Voice Quality Measurements with R&S®ROMES SQA

    This document introduces Voice Quality Measurements and describes the configuration of the R&S ROMES Software as well as the R&S ROMES Speech Server. It gives advice and offers interpretations of the measurement data.

  • R&S®ROMES4 Drive Test Software - Product Brochure

    Mobile coverage and QoS measurements in mobile networks: The R&S®ROMES4 drive test software, the unique scanners and network problem analyzer (NPA) tool from Rohde & Schwarz provide an all-in-one solution for network analysis and optimization.

  • Remote Control of R&S ROMES using a Pocket PC

    This Application Note describes how to configure a PDA (Pocket PC) and a notebook to remotely control the notebook running Rohde & Schwarz ROMES SW using wireless network techniques.

  • Driver for ROMES 3.6 for a new mobile phone?

    Driver for ROMES 3.6 for a new mobile phone?QuestionWe have ROMES version 3.6 and we bought a new mobile station.ROMES 3.6 displays the following message: "ROMES could not load this mobile model".ROMES does not have any problems with older mobile phones.Would you sent me the driver that allows ROMES to work with this mobile phone?AnswerYou have to install the latest ROMES version with the latest

Results 1 - 10 of 108
Previous  1  2  3  4  5  6  7  8  9  10  Next
Thank you.

Your request was successfully sent!

We will get in touch with you soon.

Your Rohde & Schwarz Team


Please enter your first name.

Please enter a valid email address.

Please enter your name.

Please enter your company name.

Please enter your location.

Marketing permission
Please enter the characters shown in the image
show captcha

The input was not correct.
International Website