346 Results
It is also demonstrated how CRPAs can be tested using R&S’s high-end GNSS simulator R&S®SMW200A. video,SMW200A, GNSS simulation This video shows how to perform advanced interferer simulations for testing multi-antenna GNSS receivers with anti-jam capabilities, also known as Controlled Reception Pattern Antennas (CRPAs).
The test solution is based on the R&S ® SMW200A vector signal generator and the R&S ® FSW signal and spectrum analyser. The R&S ® SMW200A provides realtime RF and envelope signal generation plus digital predistortion in one instrument and the R&S ® FSW enables full PA characterization, including EVM, gain and distortion measurements.
Rohde & Schwarz manual for the R&S®SZU100A IQ upconverter.
The video demonstrates the configuration of an LTE signal including MBSFN subframes based on the R&S SMW200A vector signal generator. Dynamic spectrum sharing (DSS) enables 5G NR to coexist with LTE in the same frequency bands. The video demonstrates the configuration of an LTE signal including MBSFN subframes based on the R&S SMW200A vector signal generator.
Group delay measurements made fast and easy with the R&S®FSW and R&S®SMW The R&S®FSW spectrum analyzer and R&S®SMW200A signal generators can be used to measure absolute and relative group delay (GD) on satellite transponders, frequency converters and other components.
The setup based on the R&S ® SMW200A vector signal generator and the R&S ® FSW signal and spectrum analyzer can test bandwidths up to 2 GHz, which is 100 times larger than in current LTE networks. FSW, Test & Measurement, Signal and Spectrum Analyzer This Video shows unleashing 5G mm-wave frequencies presented at GSMA MWC 2015
The realtime RF and envelope signal is provided from a single instrument, the R&S®SMW200A vector signal generator. The R&S®FSW signal and spectrum analyzer measures, for example, distortion and power added efficiency (PAE). The most versatile and easy envelope tracking test solution has been demonstrated by Rohde & Schwarz at the GSMA Mobile World Congress 2014 in Barcelona.
A combination of the R&S®SMW200A vector signal generator and the R&S®FSW signal and spectrum analyzer equipped with the R&S®FSW-K19 option can be used to characterize two-port devices such as satellite transponders, power amplifiers and converters.
The setup is based on the R&S ® SMW200A vector signal generator, the R&S FSW signal and spectrum analyzer and the R&S ® RTO oscilloscope to test bandwidths up to 2 GHz . This makes the solution ideal for developing transceivers for 5G. video, oscilloscope, LTE, SMW200A, FSW, RTO, 5G A compact test solution to generate and analyze ultra-wideband signals has been demonstrated by Rohde & Schwarz at the
Rohde & Schwarz Manual for the R&S®SZV100A Q-/V-Band 36- 56 GHz RF-Upconverter.
Rohde & Schwarz system manual for the R&S®UD1065 Up- / Downconverter; it provides all the information required to measure IEEE 802.11ad signals.
Using the R&S SMW200A vector signal generator makes it very easy to set up a 5G cell.
The R&S®FSW signal and spectrum analyzer with the R&S®FSW-K18 amplifier measurement option and in combination with the R&S®SMW200A vector signal generator characterizes amplifiers and other two-port devices with any given stimulus.
Based on the R&S®SMW200A vector signal generator and the R&S®FSW signal and spectrum analyzer, Rohde & Schwarz demonstrated WLAN IEEE 802.11ad signal generation and analysis as an example of a broadband signal up to 2 GHz.
Interface Control Document for xDW streaming
25-Aug-2021 | AN-No. 1GP133
Interface Control Document for xDW streaming
17-Mar-2022 | AN-No. 1GP134
Hardware-in-theloop testing with GNSS receivers made easy
03-Jun-2019
5G Signal Generation - R&S SMW200A The best performance - hassle free - Flyer
R&S®SMW200A Vector Signal Generator | ベクトル信号発生器 - Product Brochure Brochures and Data Sheets Product brochure
By making the simulation of fading scenarios easy and flexible, the R&S®SMW200A is the perfect tool to verify that your MIMO receiver can meet performance requirements.
27-Oct-2020
This video demonstrates the generation of a 5G NR waveform using the R&S®SMW200A vector signal generator and the R&S®SMW-K114 5G air interface candidates option from Rohde & Schwarz. In this example the 5G waveform uses one of the physical layer parameterization currently discussed in 3GPP RAN1.
Together with the R&S®SMW200A vector signal generator and the R&S®FSVA3000 signal and spectrum analyzer, this setup provides a cost-efficient solution for 5G RF characterization tests. SMW200A, 5G FR2, base station test, OTA test, FSVA3000, FE44 Follow this video series on our latest T&M innvoations for 5G devices, base stations and 5G mobile networks and many more topics.
The demystifying 5G video series discusses main topics related to 5G including requirements, timeline, potential frequency and waveform candidates. video, SMW200A, FSW, signal generator, signal analyzer, 5G How about 5G EVM measurements better than 40 dB at 28 GHz?
Perform DPD on a vector signal generator for improved EVM performance
28-Aug-2023 | AN-No. 1GP139
This application note shows how to perform user equipment (UE) receiver tests, such as block error rate (BLER) and throughput tests, under fading conditions with the R&S®CMW500 RF tester and the R&S®SMW200A vector signal generator in LTE(-A), W-CDMA (HSPA+), TD-SCDMA and GSM (GRPS and EGPRS(2)).
03-Nov-2015 | AN-No. 1MA194
MWC2019, SMW200A, SMW-B15, FSW, fading, 5G, Rel.15, base station test, performance test, FR1, FR2 Rohde & Schwarz shows the most compact solution on the market for 5G NR base station performance testing at GSMA Mobile World Congress 2019 in Barcelona.
Based on the R&S®SMW200A vector signal generator and the R&S®FSW signal and spectrum analyzer, Rohde & Schwarz demonstrated WLAN IEEE 802.11ad signal generation and analysis as an example of a broadband signal up to 2 GHz.
The R&S®Pulse Sequencer software together with the R&S®SMW200A vector signal generator offers a simple and easy way to simulate multi-emitter environments.
13-Nov-2018
With the R&S®Pulse Sequencer radar simulation software, users can easily and intuitively create scenarios for simulation of angle of arrival (AoA).
02-Apr-2020