Cellular device testing One part of 5G certification testing is taking care of Radio Resource Management, called RRM. In FR2 all the tests have to be done over the air. A special setup of testing is given in the 3GPP specification where the right behaviour of a device under tests is checked while receiving the signals from the base station under different angels. The big challenge for a test solution

Presented by Andrea D'Aquino, Andreas Ibl and Steve Sandler We will be discussing power integrity issues, root causes and countermeasures in sensitive electronic designs. Demonstrating best design & test practices and solutions we will be supporting electronic design engineers effectively and efficiently powering their devices and systems. Measurements in the time & frequency domains provide detailed

5G broadcast 5G is for sure promising to provide new and original technological and business opportunities. But 5G brings new broadcast and multicast capabilities to the whole ecosystem allowing other new applications. 5G Broadcast creates opportunities for broadcast network operators to make their infrastructure more dynamic and allow them to discover new distribution features. 5G is for sure promising

Signal Quality Indicator (SQI) In this video we show how to perform the Signal Quality Indicator (SQI) test requirement for the OPEN Alliance TC12 Interoperability test with 1000BASE-T1. In this video we show how to perform the Signal Quality Indicator (SQI) test requirement for the OPEN Alliance TC12 Interoperability test with 1000BASE-T1. For this test the 1000BASE-T1 needs to establish a link with

Arnd Sibila, technology marketing manager, explains how to measure the real network performance, capacity and coverage, as perceived by end-users. In the video, Arnd describes the scope of tests performed and what parameters to consider in making these tests. network performance test, capacity, coverage, educational video Arnd Sibila, technology marketing manager, explains how to measure the real network

Abhay shares how his idea of an Indian development center became reality. Abhay shares how his idea of an Indian development center became reality. Satcom, satcom testing,development, technology, job, career Learn from Abhay how his idea of an Indian development center became reality

Highly developed standards such as LTE and WLAN 802.11ac presuppose MIMO. MIMO testing requires a signal generator with multipath and standard-compliant fading simulation in all signal paths. The R&S®SMW200A vector signal generator can internally simulate all MIMO constellations up to 8x2, including fading. Highly developed standards such as LTE and WLAN 802.11ac presuppose MIMO. MIMO testing requires

Maximum throughput with ultrafast measurement cycles RF component production Filter and passive component testing Front-end module and active component testing R&S®ZNB3000 Product launch video

A comparisson between CAN decoding on the R&S®RTM oscilloscope with automotive Ethernet decoding using the K57 option on the R&S®RTO oscilloscope. A comparisson between CAN decoding on the R&S®RTM oscilloscope with automotive Ethernet decoding using the K57 option on the R&S®RTO oscilloscope. CAN, trigger, decode, automotive ethernet, RTM, RTO A comparisson between CAN decoding on the R&S®RTM oscilloscope

IEC 61000-4-41 Broadband radiated immunity tests IEC 61000-4-41 Broadband radiated immunity tests IEC 61000-4-41 Broadband radiated immunity tests

Ready for an oscilloscope that blows the competition out of the water? You may not know it yet, but your next 3000-class oscilloscope could be faster, more precise, and more compact. Until now, 3000-class oscilloscopes have only captured a small fraction of real-time signal activity, struggled to isolate small details in the presence of larger signals and made trade-offs between performance and size

Coexistence testing for GNSS receivers The performance of GNSS receivers must be validated and characterized not only under ideal conditions, but also in the presence of other communication signals like GSM, UTMS or LTE. The performance of GNSS receivers must be validated and characterized not only under ideal conditions, but also in the presence of other communication signals like GSM, UTMS or LTE

Jeff Salamon Jeff Salamon - 44 Ghz EMC Antennas Jeff, Salamon, 44, Ghz, EMC, Antennas, tradeshow Jeff Salamon 44 Ghz EMC Antennas

The R&S®SMW200A vector signal analyzer and R&S®FSW signal and spectrum analyzer from Rohde & Schwarz make the calibration of the signal path towards the device under test (DUT) simple and easy, as demonstrated in this video Testing RF components, such as power amplifiers and filters, or prototype transceiver modules becomes much more complex with higher frequencies, particularly in the mmWave range

Animated avatar calls using augmented reality are one of the key application areas for 5G-Advanced. The R&S CMX500 radio communication tester empowers network operators to evaluate XR-based applications and services in a controlled environment, ensuring optimal performance and quality before mainstream deployment. Animated avatar calls using augmented reality are one of the key application areas for

Long press PTT or simultaneous transmissions are serious problems in ATC voice communication. AVQA frequency monitor provides a great tool for analyses and alarming of such irregularities. Based on the non-intrusive voice monitoring, AVQA has a complete information about communication. Long press PTT or simultaneous transmissions are serious problems in ATC voice communication. AVQA frequency monitor

Point-In-Pulse Measurements In this video we see how the Point-in-pulse (or wideband) measurement technique overcomes the limitations of the average technique and consider some of the hardware requirements to perform the measurement successfully. In this video we see how the Point-in-pulse (or wideband) measurement technique overcomes the limitations of the average technique and consider some of the

This webinar discusses the test requirements of next generation single-channel and multichannel digital receivers and demonstrates an efficient and comprehensive test solution based on the R&S®Pulse Sequencer software in combination with the R&S®SMW200A vector signal generator. This webinar discusses the test requirements of next generation single-channel and multichannel digital receivers and demonstrates

EVM is an important figure of merit when testing DUTs. Customers expect test equipment to deliver excellent EVM performance out of the box, without the need for extensive configuration and calibration procedures. EVM is an important figure of merit when testing DUTs. Customers expect test equipment to deliver excellent EVM performance out of the box, without the need for extensive configuration and

Presenter: Uwe Bäder, Rohde & Schwarz, Director Public Affairs This talk discusses the regulatory framework for space communication, focusing on the role of the International Telecommunication Union (ITU). It delves into international coordination, notification and recording procedures for space systems and earth stations. The talk further highlights the need for evolving regulations due to rapid advancements

Session b: Design for EMC - Boost converter Design and Measurements Speakers: Robert Schillinger and Mohamed Al-Alami from Würth Elektronik Abstract: Noise measurement time vs. frequency domains Component parasitic contributions to noise Impact of layout, tracking and filtering Common and differential mode measurements using the Oscilloscope FFT analysis Oscilloscope, EMC, Power Electronics Watch now

Our colleague Sarah reports on the dress code at Rohde & Schwarz. Our colleague Sarah reports on the dress code at Rohde & Schwarz. Our colleague Sarah reports on the dress code at Rohde & Schwarz.

Discover how to easily deocde SENT using Rohde and Schwarz oscilloscopes, as displayed on an R&S®RTO. Discover how to easily deocde SENT using Rohde and Schwarz oscilloscopes, as displayed on an R&S®RTO. RTO2000, SENT Bus, decoding, automotive Discover how to easily deocde SENT using Rohde and Schwarz oscilloscopes, as displayed on an R&S®RTO.

R&S®MXO 5 - Evolved for more challenges No longer a trade off between maintaining a high sample rate and capturing time: With a standard 500 Mpts of memory per channel with your R&S®MXO 5 series oscilloscope it is possible to capture longer time periods while maintaining a high sample rate. No longer a trade off between maintaining a high sample rate and capturing time: With a standard 500 Mpts of

Simulation of a realistic flight scenario

This video shows the methodology of the Network Performance Score (NPS), its different aggregation levels and drill-down capabilities that constitutes the bridge between benchmarking and network optimization. NPS, network performance score, QoE, methodology, aggregation, drill-down This video shows the methodology of the Network Performance Score (NPS), its different aggregation levels and drill-down

Isolated probing system Accurately measure fast switching signals in noisy environments with RT-ZISO, ideal for WBG testing. Accurately measure fast switching signals in noisy environments with RT-ZISO, ideal for WBG testing. Measuring accurately in wide bandgap application

This video series demonstrates the calibration of a four-port network analyzer and the measurement of rise time, impedance vs. distance and skew on a board with differential lines. Learn more about time domain reflectometry (TDR) and time domain transmission (TDT) for signal integrity applications using the R&S®ZVA vector network analyzer from Rohde & Schwarz. This video series demonstrates the calibration

Cellular device development and testing In an increasingly connected world, data and network security is crucial even for T&M applications. The LANCOM R&S UF is an important part of the R&S Future Lab. LANCOM R&S®Unified Firewalls offer small and medium-sized enterprises a customized complete solution for state-of-the-art security and Unified Threat Management (UTM). In an increasingly connected world

A guide to perform cable testing based on unshielded twisted pair (UTP) for 1000BASE-T1 based on the OPEN Alliance TC9 specification. A guide to perform cable testing based on unshielded twisted pair (UTP) for 1000BASE-T1 based on the OPEN Alliance TC9 specification. This video gives an overview how to calibrate the R&S®ZND, how to perform VNA accuracy measurements, S-parametr and impedance measurements