Promo: What's next? Taking industry leadership or watching from the sidelines?

What's next? Taking industry leadership or watching from the sidelines?

Take the lead with up to 60% off our instruments

Passive probes for oscilloscopes

Passive probes for oscilloscopes
Open Lightbox
Passive probes for oscilloscopes
Open Lightbox
Passive probes for oscilloscopes
Open Lightbox
Passive probes for oscilloscopes
Open Lightbox
Passive probes for oscilloscopes
Open Lightbox
Passive probes for oscilloscopes
Open Lightbox
Passive probes for oscilloscopes
Open Lightbox
Passive probes for oscilloscopes, Front HighPassive probes for oscilloscopes, Front viewPassive probes for oscilloscopes, Front HighPassive probes for oscilloscopes, Front viewPassive probes for oscilloscopes, Front viewPassive probes for oscilloscopes, Front HighPassive probes for oscilloscopes, Front view

Key facts

  • Bandwidth: up to 500 MHz
  • Dynamic range: up to 1000 V (RMS)
  • All-rounders for general purpose applications
  • Extensive accessories for optimal contacting

Brief description

Rohde & Schwarz passive probes are the all-rounders in the world of probes. They are low-cost, general purpose solutions for a broad range of applications.

Available models

Available models
Models
Bandwidth
Max. voltage
Attenuation factor
Input impedance
Comment
R&S®RT-ZP1X

R&S®RT-ZP1X

Order number 1333.1370.02

Bandwidth
38 MHz
Max. voltage
55 V (RMS) (CAT II)
Attenuation factor
1:1
Input impedance
1 MΩ || 39 pF
Comment
-
R&S®RT-ZP03S

R&S®RT-ZP03S

Order number 1803.1001.02

Bandwidth
300 MHz
Max. voltage
400 V (RMS)
55 V (RMS)
Attenuation factor
10:1
Input impedance
10 MΩ || 12 pF
 
Comment
-
R&S®RT-ZP05S

R&S®RT-ZP05S

Order number 1333.2401.02

Bandwidth
500 MHz
Max. voltage
300 V (RMS)
Attenuation factor
10:1
Input impedance
10 MΩ || 10 pF
Comment
-
R&S®RT-ZP10

R&S®RT-ZP10

Order number 1409.7550.00

Bandwidth
500 MHz
Max. voltage
400 V (RMS)
300 V (RMS) (CAT II)
Attenuation factor
10:1
Input impedance
10 MΩ || 9.5 pF
Comment
2.5 mm tip diameter, pre-adjusted for R&S®RTO2000/R&S®RTE1000
R&S®RT-ZI10

R&S®RT-ZI10

Order number 1326.1761.02

Bandwidth
500 MHz
Max. voltage
600 V (RMS) (CAT IV)
1000 V (RMS) (CAT III)
Attenuation factor
10:1
Input impedance
10 MΩ || 12 pF
Comment
Dual and quad packs available for R&S®RTH handheld oscilloscope: R&S®RT-ZI10C-2, R&S®RT-ZI10C-4
R&S®RT-ZI10C

R&S®RT-ZI10C

Order number 1326.3106.02

Bandwidth
500 MHz
Max. voltage
300 V (RMS) (CAT III)
Attenuation factor
10:1
Input impedance
10 MΩ || 11 pF
Comment
For R&S®RTH handheld oscilloscope
R&S®RT-ZI11

R&S®RT-ZI11

Order number 1326.1810.02

Bandwidth
500 MHz
Max. voltage
600 V (RMS) (CAT IV)
1000 V (RMS) CAT III
3540 V (RMS) (CAT 0)
Attenuation factor
100:1
Input impedance
100 MΩ || 4.6 pF
Comment
For R&S®RTH handheld oscilloscope
R&S®RT-ZP11

R&S®RT-ZP11

Order number 1803.0005.02

Bandwidth
700 MHz
Max. voltage
400 V (RMS) 300 V (RMS) (CAT II)
Attenuation factor
10:1
Input impedance
10 MΩ || 9.5 pF
Comment
spring tip gold plated 0,5 mm pre-adjusted for R&S®MXO4 and R&S®MXO5

Available options

Probe accessories
Product
Description

Order number 1409.7566.02

Description

Accessory kit for R&S®RT-ZP10/RTM-ZP10/RT-ZP1X passive voltage probes, 2.5 mm tip style

Contains adjustment tool, BNC adapter 2.5 mm, coding ring set 3x4 colors, dual adapter 2.5 mm to 0.8 mm sockets, ground blade 2.5 mm, ground lead 15 cm, ground spring 2.5 mm, IC-cap 2.5 mm 0.5 mm pitch green, IC-cap 2.5 mm 0.65 mm pitch blue, IC-cap 2.5 mm 0.8 mm pitch gray, IC-cap 2.5 mm 1.0 mm pitch brown, IC-cap 2.5 mm 1.27 mm pitch black, insulating cap 2.5 mm, solid tip CuBe 0.5 mm, sprung hook 2.5 mm, spring tip gold plated 0.5 mm

Order number 1416.0428.02

Description

Mini clips

10 clips

Order number 1416.0434.02

Description

Micro clips

4 clips

Order number 1416.0440.02

Description

Lead set (5 x 6cm/2.4", 5 x 15cm/5.9")

Order number 1317.7031.02

Description

Probe pouch for R&S®RTO2000 and R&S®RTE1000 oscilloscopes

Order number 1335.7875.02

Description

Accessory case for probes and small parts for all Rohde and Schwarz oscilloscopes

Order number 1326.1978.02

Description

Accessory replacement set for R&S®RT-ZI10 and R&S®RT-ZI11

Contains push-on hook clip, push-on reference contact, reference lead with crocodile clip, push-on insulating sleeve, set of color clips.

Order number 1326.1984.02

Description

Accessory extension set for R&S®RT-ZI10 and R&S®RT-ZI11

Contains test clip with steel jaws, push-on safety jaw clip, silicone-insulated reference leads, push-on Ø 4 mm test probe, Ø 2 mm reference lead with hook clip, BNC male connector to Ø 4 mm sockets, push-on BNC male connector.

Order number 1338.0742.02

Description

Probe Tip Accessory Kit

Contains ground lead, retractable hook, adjustment tool, protection cap, set indification tags, IC insulating cap, 4 x probe tip (2 x fixed, 2 x spring), ground clip, BNC adapter. Compatible with R&S®RT-ZP03, RT-ZP05S, HZO10 and RT-ZH03

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Marketing permission

Your request has been sent successfully. We will contact you shortly.
An error is occurred, please try it again later.
General and legal information

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Terms & Conditions of the Prize Draw 10 years Rohde & Schwarz oscilloscopes

1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).

2. All participators can register to the draw during January 01, 2020 to December 31, 2020 with their name, company name and business e-mail.

3. Participation is free of charge and not dependent on the purchase of goods or services.

4. The draw is only open to legal entities and only the legal entities are able to win the prizes. An individual person is not allowed to participate on its own name and its own account but as a representative of a legal entity filing the participation form in the name of and on behalf of the legal entity.

5. The prizes to win are 1 of 10 R&S®RTB2000 within the time frame January 1, 2020 to December 31, 2020:

Prize: 1x R&S®RTB2000 Digital Oscilloscope

6. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich. The winner of the prizes will be informed by e-mail within 5 (5) working days.

7. The authorized representative of the legal entity shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.

8. R&S’ employees and members of their families and also person being familiar with the process of the draw and members of their families are excluded from filling the participation form.

9. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.

10. Personal data will be processed only for the purpose of this prize draw and deleted four (4) weeks after the draw, if not agreed otherwise.

11. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Competition. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn.

12. The participants cannot claim the prizes of this draw and no legal recourse is permitted in this respect.

13. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Competition.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.