Optimize your signal and spectrum analyzer to address the most stringent EVM requirements

16-Nov-2023

Remote Emulation with the R&S^®SMB100A RF and Microwave Signal Generator

20-Mar-2012 | AN-No. 1GP89

The digital trigger of the R&S®RTP combined with the zone trigger offers versatile and flexible triggering capabilities for DDR memory interface measurements.

26-Sep-2018

This application note explains battery life tests using RT-ZVC in combination with CMWrun and CMW500, including example applications.

17-Feb-2017 | AN-No. 1MA281

This application note introduces the IVI High Speed LAN Instrument Protocol (HiSLIP) and outlines its features. HiSLIP is the successor to the VXI-11 LAN remote control protocol. This document also describes guidelines for using this protocol.

12-Nov-2014 | AN-No. 1MA208

Welcome to our short video tutorials on how to test radars using Rohde & Schwarz test equipment. Access to most information about radar is pretty restricted, as many radar applications are military or secretive industrial research.

03-Feb-2014 | AN-No. 1MA209

Pulse Train Master for the R&S Signal Generators

10-May-2011 | AN-No. 1MA148

Reverberation Chambers (RVC) have become popular as an alternative to Anechoic Chamber (AC) facilities for electromagnetic emission & immunity tests. Unlike AC, RVC reflects waves creating multipath environment. EMC testing using reverberation chamber is accepted in various EMC test standards across different industries. The RVC is cost effective allowing high field strength generation without excessive amplification needs, eliminates the need for complex positioning of antennas and DUTs increasing test speed and simulates real-world electromagnetic environments more accurately. To ensure accurate and efficient testing, specialized EMC test software is required for data acquisition, automation, and analysis. This application note describes how to setup Elektra and perform measurements in RVC.

24-Jul-2025 | AN-No. 1EE28

UTRA-FDD Receiver Tests Under Fading Conditions with CMU and ABFS

25-Jun-2008 | AN-No. 1MA54

The demand having a snubber circuit in the power supply topology leads to specific verification methods during the design which are the main focus within this document.

23-Jun-2021 | AN-No. 1SL363

WLAN IEEE 802.11ac – Wideband Signal Testing

27-Jun-2013

The R&S SMW200A vector signal generator can simultaneously generate up to eight independent signals from a single instrument to support even complex applications like MSR, carrier aggregation, MIMO or enhanced interference scenarios. This application note gives an overview of common multi-channel application examples and how to equip the R&S SMW200A appropriately.

12-Mar-2018 | AN-No. 1GP106

Convert NMEA 0183 to waypoint files for R&S^®SMU200A

26-Sep-2008 | AN-No. 1MA133

The paper compares the measurement speed and level measurement accuracy of a conventional stepped frequency scan versus an advanced FFT-based time domain scan.

29-Jan-2014 | AN-No. 1EE24

Setting up complex real-time trigger conditions using the R&S®RTE and R&S®RTO oscilloscopes increases the test coverage and robustness of converter and inverter systems.

10-Aug-2020

S-Parameters of a 50 to 75 Ohm impedance matching device using R&S ZVx VNA

06-May-2009 | AN-No. 1EZ59

Rohde & Schwarz offers a state of the art solution for testing power amplifiers with envelope tracking and/or digital pre-distortion. This application note introduces the compact and user-friendly test solution in detail and presents measurement examples.

25-Sep-2014 | AN-No. 1GP104

For cable TV, the "last mile" to the connection at the home is the bottleneck that prevents higher data rates. The last mile is made up of optical fiber and coaxial cables, amplifiers and electrical/optical converters. This mix of optical fiber and coaxial cables is known as a hybrid fiber coax (HFC) network. One option for cable network providers to maximize both the downstream (DS) and upstream (US) data throughput using the existing cable TV network, but without making expensive changes to the HFC network infrastructure, is to employ the data over cable service interface specification (DOCSIS) 3.1. This Application Note discusses the fundamental technological advances of DOCSIS 3.1 and presents measurement solutions from Rohde & Schwarz.

02-Mar-2015 | AN-No. 7MH89

Powerful end-to-end encryption for Ethernet private lines: R&S SITLine ETH protects against spionage and manipulation without decreasing throughput.

03-Mar-2015

This application note describes ATSC Mobile DTV standard A/153, ATSC-M/H. This standard is completely implemented in the R&S AEM100 ATSC-M/H Emission Multiplexer.

22-Jan-2011 | AN-No. 7EB01

Operation Guide for HSUPA Test Setup according to 3GPP TS 34.121

07-Oct-2009 | AN-No. 1CM73

This application note will focus on phase noise measurements for pulsed RF carriers such as those used for radar systems.

18-May-2016 | AN-No. 1EF94

R&S®Time Code Inserter: Time Code-Based A/V Distortion Analysis

16-Apr-2013 | AN-No. 7BM84

Load transient response – enhancing loop stability testing

09-May-2023

The R&S VTC/VTE video testers analyze and evaluate the quality of set-top boxes and TVs on the DUT’s A/V interfaces from a user perspective.

04-Feb-2014

Measurement of phase-, timing- and gain offset between 2 signals using multiple spectrum analyzers

28-Sep-2010 | AN-No. 1EF70

The R&S®SMW200A signal generator together with the R&S®Pulse Sequencer software simplifies signal generation for multi-emitter environments.

24-Feb-2015

Measuring the power supply noise rejection (PSNR) requires accurate generation and leveling of artificial, sinusoidal disturbances and measurement of resulting phase-noise and jitter impairments.

30-Sep-2020

Smartly verify and decode Bluetooth® Low Energy (BLE) transmit signals with a reliable and costefficient spectrum analyzer – the R&S®FPC.

17-May-2018

Controlling External Generators and Power Meters with Network Analyzer ZVR

19-Oct-1998 | AN-No. 1EZ46