With preamplifier, R&S® FSV-B22 option 1 GHz –162 dBm, –165 dBm typ.   3 GHz –160 dBm, –163 dBm typ.   7 GHz –156 dBm, –159 dBm typ.

Customers from all over the world rely on the accuracy of an Rohde & Schwarz Spectrum Analyzer, Signal Analyzer or Vector Signal Analyzer.

Rohde & Schwarz INRADIOS GmbH - your satellite network can do more

Overview of Tests on Radar Systems and Components

10-Aug-2012 | AN-No. 1MA127

Rohde & Schwarz offers a wide range of instruments and systems such as wireless device testers, infrastructure testers, protocol testers, conformance and preconformance testers.

Rohde & Schwarz Instrument Security Procedures - overview of covered instruments.

FSV3000 signal and spectrum analyzer for signal analysis and demodulation from 10 Hz up to 44 GHz

Additional displays such as the mono signal or the MPX spectrum display support further analysis.Key Facts Comprehensive measurement functions for complete FM stereo analysis A variety of audio filters and detectors for standard-compliant measurements Key FactsThe R&S®FSV-K7S option expands the functionality of the R&S®FSV-K7 option by providing measurements on FM stereo transmitters.An integrated

The R&S®FSV-K40 option enables the R&S®FSV and R&S®FSVA to perform fast and easy phase noise measurements in development and production.Equipped with the R&S®FSV-K40 option, the R&S®FSV and R&S®FSVA can measure the single sideband phase noise across a selectable carrier offset frequency range with logarithmic display of the offset range.

Overview Key Facts Flexible modulation analysis from MSK to 64QAM Numerous standard-specific default settings Easy operation with graphical support Key FactsThe R&S®FSV-K70 option enables users to flexibly set the analysis of digitally modulated single carriers down to the bit level.

Overview The schematic view of the test setup simplifies measurements on frequency-converting DUTs.Tabular representation of measurement results.Measurements on an amplifier.Key FactsThe R&S®FSV-K30 option expands the R&S®FSV or R&S®FSVA signal and spectrum analyzer by adding measurement functionality otherwise only provided by special noise measurement analyzers.Key FactsThe R&S®FSV-K30 option expands

analysis in line with the 3GPP standard, e.g. calculation of phase/frequency/magnitude error, EVM, I/Q imbalance, spectrum due to modulation and spectrum due to switching transients.It can be installed on any R&S®FSV.Features Convenient analysis due to standard-conforming limit checks Automatic detection and configuration Convenient and comprehensive analysisFeatures & BenefitsAfter configuring the

R&S FSV3000 Signal and Spectrum Analyzer - Product Brochure

The R&S®FSV-K91n application firmware extends the functionality of R&S®FSV-K91 to include spectrum and modulation measurements in accordance with the IEEE 802.11n standard.Features R&S® FSV-K91 WLAN application firmware R&S® FSV-K91n WLAN application firmware Analyzers supporting WLAN measurements features & benefitsExpands the R&S®FSV signal and spectrum analyzer by adding the capability to perform

Brief DescriptionR&S®FSV-K93 adds WiMAX™ options to the scope of functions provided by the R&S®FSV analyzer. The R&S®FSV-K93 application firmware allows TX measurements on OFDM and OFDMA signals in line with the WiMAX™ IEEE 802.16‑2004 and IEEE 802.16e‑2005 standards.All WiMAX™ measurement applications are fully remote-controllable via the IEC/IEEE bus or LAN, using SCPI commands.

Overview Key Facts Modulation signal versus time Spectrum of the modulation signal (FFT) RF signal power versus time Key FactsThe R&S®FSV-K7 AM/FM/φM measurement demodulator option converts the R&S®FSV or R&S®FSVA into an analog modulation analyzer for amplitude-, frequency- or phase-modulated signals.

No additional time is needed for transfer of T & M equipment from R & D to productionAnalyzers equipped with the R&S®FSV-K91/ R&S®FSV-K91n WLAN options are one-box solutions, which makes remote control easy.

Measurements at the push of a button, capturing rare events with event based actions and simple script programming with the SCPI recorder – setting up complex measurements in no time is the strength of the R&S®FSV3000 signal and spectrum analyzer.

Version 1.01 32Bit Release Notes including information for Installation148 kB1.01 12.08.2016 Title Size Version Date Touch Monitor Update Release Note Version 1.01 32Bit Release Notes including information for Installation148 kB1.01 12.08.2016 Touch Monitor Update Setup Version 1.01 32Bit87 MB1.01 12.08.2016 Title Size Version Date filtwiz Filter Wizard Filter Editor for R&S®FPS-K70, R&S®FSQ-K70, R&S®FSV-K70

Windows XP or other instruments are not affected. 1.3 21.10.20191 MB R&S®FSV/FSVA - Firmware V3.70 01.12.2020682 kB International Keyboard Support (Release Note) V 5.023.11.2017356 kB International Keyboard Support (Setup File) V 1.028.09.2016124 kB Remote Access RS instruments in light of CVE-2018-0886. V2.10 V2.1026.06.2018348 kB

Versatile Software Tool for Rohde & Schwarz Instruments

RSCommander is a versatile software tool for a wide range of Rohde & Schwarz spectrum-, network analyzers, signal generators and oscilloscopes. It allows for automatic instrument discovery, making screenshots, reading traces, file transfer and simple script creation.

24-Dec-2017 | AN-No. 1MA074

R&S FS-SNS Smart Noise Sources

R&S FS-SNS Smart Noise Sources

R&S ARB Toolbox

13-Dec-2018 | AN-No. 1GP88

Title Size Version Date filtwiz Filter Wizard Filter Editor for R&S®FPS-K70, R&S®FSQ-K70, R&S®FSV-K70, R&S®FSW-K70, R&S®VSE-K70, R&S®SMW-B10, R&S®SMBV-B10, R&S®SMU-B9/B10/B11, R&S®SMJ-B9/B10/B11, R&S®SMATE-B9/B10/B11, R&S®AMU-B9/B10/B11. Including description (PDF)336 kBV 1.8 04.09.2015

FSV3000 signal and spectrum analyzer for signal analysis and demodulation from 10 Hz up to 44 GHz

EMI Measurement Application for Signal and Spectrum Analyzers - R&S®FSW-K54, R&S®FSV3-K54, R&S®FPL1-K54, R&S®FSV-K54 - Specifications

R&S FSV/FSVA/FPS-K76/-K77 3GPP TD-SCDMA BS/UE Measurement Applications - Specifications

Rohde & Schwarz User Manual for the R&S®FSV-K54 EMI measurements application; Describes the specific functions of the application, including the remote control commands with programming examples.

What kind of FFT filter is used within the FSV?