Voice communications system for civil air traffic control

R&S®GW5440 universal media gateway – unlimited solution for flexibility and modular configurability when converting between standards.

R&S®RTP high performance series oscilloscopes benefit from highly accurate measurements, unprecedented speed and a compact form factor. More information.

R&S®RTO6 is the oscilloscope you can trust. With bandwidths up to 6 GHz, it lets you test & debug your designs quickly. Leverage your expertise now!

The R&S®SMA100B RF and microwave signal generator delivers uncompromising maximum performance.

R&S®ZNA-K8 / R&S®ZVA-K8 - software option for clear and straightforward converter control and converter parameter settings.

VNA Source Phase Control Options for characterization of devices requiring a defined phase such as differential amplifiers, mixers, IQ mixers and others.

The FFT-based spectrum analysis function can be used to measure a DUT's spurious and harmonics, providing short sweep times along with high dynamic range and fine frequency resolution. It quickly detects undesired signal components (spurious) in converters and T/R modules. The marker-to-spectrumfunction directly gets to the root of problems in the event of unexpected S-parameter results, thus providing fast and extremely useful integrated diagnostics.

The R&S®ZNB vector network analyzer features a wide dynamic range, low trace noise and high output power and is targeted at applications in the electronic goods and mobile radio industries.

The R&S®ZNA high-end vector network analyzers offer a DUT-centric approach,  an excellent RF-performance, a unique hardware concept and touch-only operation.

The R&S®ZNL is a cost-efficient, portable vector network and spectrum analyzer, ideal for development, production and in the field

The R&S®ZNLE is a cost-efficient benchtop vector network analyzer. The analyzer's excellent performance makes it ideal for education, development and production.

The R&S®Cable Rider ZPH has all the essential basic measurement capabilities required for installing and maintaining antenna systems in the field. Learn more.

Series of automatic economy calibration units with frequencies up to 50 GHz. 2 port and 4 port models available. ZN-Z51 has configurable test ports.

R&S®FSV3000 signal and spectrum analyzer for signal analysis and demodulation from 10 Hz up to 50 GHz

The FC330SR frequency converter is designed for down-conversion of RF signals in the frequency range from 220 GHz to 330 GHz to IF signals.

The R&S®IQW Wideband I/Q Data Recorder is a versatile instrument for fast and reliable realtime recording, storage and playback of wideband I/Q data streams.

The R&S®NRQ6 combines the accuracy of a power meter with excellent dynamic range. Extremely precise and fast down to –130 dBm.

There are several reasons to characterize RF components under pulsed conditions. Often it is to prevent thermal damage to the device under test or to characterize it under operating conditions. Vector Network Analyzers offer integrated hardware and software for accurate device characterization under pulsed conditions. This hardware includes built-in pulse modulators, pulse generators and synchronization IO including for external device control.

The TDR option displays discontinuities, reflection factors or impedance versus delay/length.

Options for characterizing frequency-converting devices such as mixers, block upconverters and downconverters, T/R modules and others.

ZNBT true multiport VNA vector network analyzer with up to 24 true VNA ports. Frequency range from 9/100 kHz to 8.5/20/26.5/40 GHz.

R&S®ZVH handheld cable & antenna analyzer increases efficiency in the field. Frequency range from 100 kHz to 3.6 GHz / 8 GHz.

ZN-Z15x automatic economy calibration units series up to 8.5 GHz: 2, 4 or 6 ports SMA(f), ZN-Z154 up to 24 ports, 2-port type N(f). ZN-Z156: 2 ports 67 GHz.

R&S®ZN-Z1Exx economy calibration units from 5 kHz to 26.5 GHz. Two configurable ports: 3.5 mm-compatible or N-type. Further configurable as m or f.

The R&S®FSVA3000 signal and spectrum analyzer for signal analysis and demodulation from 10 Hz to 54 GHz

The IQ software interface significantly simplifies analysis of modulated signals. This option converts modulated signals to I/Q data in realtime. Explore now!

The R&S®FSWP phase noise analyzer combines low‑noise internal sources and real-time cross‑correlation for high sensitivity phase noise measurements.

ZV-Z5x series of automatic economy calibration units. Upper frequency ranging from 3 GHz (2 ports, 75 Ω) to 8 GHz (8 ports), 20 GHz (6 ports)