R&S®M3TR Software Defined Radios

Radio family for tactical communications

Key facts

  • Software-configurable
  • Multiband capability
  • Multiwaveform capability

Brief description

Today's military missions are characterized by joint operations of multinational armed forces.

Features & Benefits

  • Multiband, Multimode, Multirole
  • Logistics and readiness
  • Ease of operation
  • EPM (ECCM) waveforms

Key facts

  • Software-configurable
  • Multiband capability
  • Multiwaveform capability
  • Selective links in one net
  • GPS reporting and message services
  • User-friendly HMI (single-knob control for basic operation)

Brief description

The challenge

Today's military missions are characterized by joint operations of multinational armed forces. Interoperability of the equipment, especially in the field of communications, is therefore the primary objective of the international partners responsible for creating one of the most important aspects for efficient cooperation. The R&S®M3TR features maximum flexibility in terms of frequency bands and waveforms for practically all services and platforms.

The solution

The R&S®M3TR software defined radio family is a new generation of high-performance digital radios. The heart of the new integrated communications system is the lightweight R&S®MR300xH/R&S®MR300xU manpack radio, which offers solutions for all aspects of tactical communications as well as uniform and reduced interservice logistics. A lightweight handheld version (R&S®MR3000P) complements the radio family. Like the manpack radios, the R&S®MR3000P supports both open and secure communications modes.

Features & Benefits

  • Multiband, Multimode, Multirole
  • Multiband

    For applications using various services and networks, different types of radio units were previously required. The R&S®M3TR covers the entire spectrum from the HF via the VHF to the UHF band, allowing interoperability as well as uniform and reduced interservice logistics. The frequency flexibility of the R&S®M3TR meets various national and international regulations, providing global operation in fast-changing missions and environments.

  • Multimode

    A software radio not only offers flexible network solutions, it also integrates existing national or company standards into a single unit. Thanks to optimized protocols and waveforms, the R&S®MR300xH/R&S®MR300xU attains maximum throughput rates for digital voice, data and position location.

  • Multirole

    The multirole features of a software defined radio are mainly determined by its ease of integration into tactical communications networks. In addition to its use as a functional terminal in the individual subnet, e.g. CNR or PRN, it can also act as an interface between the various subnets. The R&S®M3TR can be used on diverse platforms and features interfaces to fixed networks such as WAN and LAN, as well as intelligent gateway and relay/rebroadcast functions such as routing of selective calls for subscribers inside / outside the home network.

  • Logistics and readiness
    • Low volume and weight
    • Built-in test down to the module level
    • Common logistics concept for reduced costs throughout lifecycle
    • Common human-machine interface (R&S®MR300xH/R&S®MR300xU)
    • Automatic firmware update of external components
    • Synthesizer calibration via antenna connector
    • Minimal training required
    • Excellent flexibility
    • High MTBF
    • Low volume and weight
    • Power-saving mode
  • Ease of operation

    The R&S®M3TR radios offer many diverse functions that help ensure straightforward, secure and errorfree operation.

    The functions are available via hierarchically structured menus and context-sensitive softkeys. The clever concept and the arrangement of the control elements allow intuitive control of the radio even under difficult conditions from outside and without having the removable front panel in view.

  • Software Options

    As a software defined radio, the R&S®M3TR is able to run a wide variety of waveforms. To provide radio systems that perfectly fit user needs and applications, radio software can be ordered on the basis of communications requirements.

    Upgrades by adding new waveforms or extending the frequency range of radio networks are also possible in this concept. Communications networks can therefore be tailored to always find the best compromise between current communications needs and budgetary setup.

  • Automatic link establishment (ALE)
  • ALE 2G (R&S®GS4101S)

    The common basic protocol standard for ALE is Fed. Std. 1045/46, known as 2nd generation or 2G ALE. 2G ALE uses non-synchronized scanning of channels, and it takes about several seconds to half a minute to repeatedly scan through an entire list of channels looking for calls.

  • ALE 2G/ALE 3G (R&S®GS4155S)

    The latest ALE standard uses accurate time synchronization via GPS-locked clocks or a time server to achieve faster and more dependable linking. It is generally known as 3rd generation or 3G ALE. Through synchronization, the calling time to achieve a link may be reduced to less than 10 seconds. Although 3G ALE is better and more reliable, the existence of a large, installed base of 2G ALE radio systems and the wide availability of the equipment have made 2G the baseline standard for global interoperability.
    Links are set up over fast link setup (FLSU) and kept stable using link maintenance (LM). Users can choose between open or encrypted LSU. Occupancy detection (OD) prevents collisions in the network.

  • xDL protocols (R&S®GS4155S)

    The Rohde & Schwarz ALE 3G built-in xDL data link protocols are LDL and HDL. They offer acknowledged point-topoint delivery of datagrams over an already established HF link. Each protocol is optimized for different channel conditions and datagram sizes to enable high throughput in all communications scenarios. A good throughput can be achieved even under very challenging channel conditions below 0 dB SNR.
    The low latency data link protocol (LDL) is optimized for delivering small datagrams in all channel conditions and also longer datagrams in poor channel conditions. It supports a maximum data rate of approx. 300 bit/s.
    The high-throughput data link protocol (HDL) is optimized for delivering large datagrams in medium to good channel conditions and supports a maximum data rate of approx. 3400 bit/s.
    The R&S®GM4121S software can be used to additionally encrypt xDL transmitted data.
    The Rohde & Schwarz IP over air (R&S®IPoA) interface provides transparent IP functionality over the xDL data link protocol. It can be used to set up communications systems that require a transparent connection of IP networks over HF radio links. IP based applications – such as situational awareness or message handling systems – are enabled to exchange their data over such radio links. A standard IP interface allows a user application to be easily and economically connected to the HF radiocommunications system.
    Alternatively, xDL protocols can be used for serial data transfer over the RS-232-C interface.

  • EPM (ECCM) waveforms
  • R&S®SECOM-V and R&S®SECOM-H

    The R&S®SECOM waveform (R&S®SECOM-V for the VHF and UHF bands, R&S®SECOM-H for HF) is setting new standards with its high hop rates and secure synchronization is setting new standards. It ensures powerful protection against detection, interception, jamming and spoofing. User data (digital voice or data) is transmitted completely digitally and in encrypted form. Within one R&S®SECOM-V net, several subnets and sublinks can be established simultaneously in the point-to- point and point-to-multipoint modes. Network synchronization and access can be planned and controlled individually for each user. Methods such as late net entry or hailing (R&S®SECOM-V) are available for this purpose.

    R&S®SECOM is a combination of COMSEC and TRANSEC for encrypted voice and data communications in the frequency- hopping mode.

    The COMSEC part of the R&S®SECOM method is based on the R&S®RSCA crypto algorithm developed by Rohde & Schwarz. The method uses key lengths of up to 256 bit (approx. 1077 variants). Assuming uninterrupted transmission, the same bit sequence would be repeated after about 2 × 109 years. The keys required can be distributed by means of a key distribution device or directly from a PC. All keys are encrypted and the deciphered original is present only in the read-protected security processor. Crypto units complying with NATO standards such as ELCRODAT 4‑2/R&S®MMC3000 may be used as an external option.

    To plan communications networks and links, a PC-based radio network management system is available. This tool allows users to generate keysets, plan frequency resources, define user channels and services and set up complete networks of radios. After the desired networks have been defined, the resulting data can be easily distributed to the radios by means of a fillgun or directly by using one of the radios’ data interfaces.

  • R&S®SECOM-V (R&S®GS3030S)

    R&S®SECOM is optimized for tactical communications and operates in the full VHF/UHF band. It is implemented as a software option running on all R&S®MR300xH/ R&S®MR300xU tactical radios.

    R&S®SECOM-V was developed to meet as closely as possible the network demands of the primarily land-based mobile users of tactical radio services. R&S®SECOM-V is attuned to the requirements of land forces, where the implementation and management of complex network structures are in the foreground. The primarily hierarchical command structure of the armed forces should be mapped as closely as possible to the communications network. To this end, users can be organized in networks using the same frequency pool and the same key – one each for TRANSEC and COMSEC.

    Possible address modes are point-to-point, point-to-multipoint and broadcast. Network synchronization and access can be controlled by each user. Late net entry is available for this purpose.

    R&S®SECOM-V automatic net entry and time beacon
    The radio automatically performs a net entry whenever synchronization is lost (R&S®M300xU/R&S®M300xH display message: NSYN). The time reference unit of an R&S®SECOM-V net automatically takes care of maintaining synchronization before it is lost. If the time beacon function is not active, a net entry may need to be performed from time to time.

    R&S®SECOM-H (R&S®R&S®GS3001S)
    Out-of-band hailing is an outstanding feature that considerably enhances the multiband capabilities of the R&S®M3TR radio with cross-band hailing. The latest software release makes it possible to scan FF calls over the entire frequency range from 1.5 MHz to 512 MHz. This means real multiband operation, as even HF calls can be received while operating the radio in the VHF/UHF range. All FF modulation and squelch modes for the detection of signals are supported.

  • R&S®SECOM-H (R&S®GS3001S)

    R&S®SECOM-H is a Rohde & Schwarz proprietary frequency-hopping HF radiocommunications waveform. R&S®SECOM-H is based on a multiwaveform concept and is designed to operate in environments where a certain percentage of the hop set frequencies are blocked due to either intentional disturbances (i.e. jamming) or unintentional ones, as well as environments experiencing severe Doppler spread and/or multipath delay. It is furthermore based on modem waveforms that can be adapted to the specific characteristics of the HF channel and its propagation.

    R&S®SECOM-H provides digital voice (low bit rate vocoder at 600 bit/s, 1200 bit/s or 2400 bit/s, adjustable) and data services (up to 2400 bit/s). To ensure reliable links even in severely degraded channels, free hop set search (FHS) is available. FHS is an algorithm for the automatic adaptation of hop sets (ALE-like) based on channel evaluation. Radios in a point-to-point link will generate and use an advanced hop set containing only frequencies that have proven good HF performance. Channels are evaluated by measuring S/N, and results are shared between radios in the link during a three-way handshake.

    For network synchronization, either the master-slave process or GPS can be used as the network time source. GPS-based network time eliminates the need for manual net entry; all stations in the network remain synchronized as long as the GPS signal is received.

  • R&S®SECOM-P (R&S®GS3030S)

    R&S®SECOM-P is the standard EPM method for the R&S®MR3000P handheld transceiver. It was especially optimized for use on small, lightweight terminal equipment. Even for this platform, R&S®SECOM-P offers maximum performance and battery operating time. Since R&S®SECOM-P can also be loaded into R&S®MR300xH/ R&S®MR300xU equipment as a software option and is also available as a loadable waveform for SOVERON® VR, R&S®SECOM-P provides full interoperability between all tactical radios from Rohde & Schwarz.

  • R&S®SECOS 5/16 TDMA (R&S®GS3516S)

    The R&S®SECOS air-ground-air waveform provides interoperability in the EPM (ECCM) mode between the R&S®M3TR and the R&S®M3AR and R&S®M3SR Series4400 radios. Besides digital voice mode, data transmission with data rates of up to 16 000 bit/s is supported. Both TDMA and non-TDMA modes are implemented. For details on R&S®SECOS implementation in the R&S®M3TR, see the related Technical Information (R&S®SECOS). Network synchronization for R&S®SECOS can be accomplished using the master-slave process via an external time source or by using GPS as the network time.

    R&S®SECOS 5/16 TDMA guard receiver
    The guard receiver function monitors up to two channels in background mode. This allows operators who are occupied with R&S®SECOS voice or data traffic and receive an emergency call to transmit on one of these dedicated frequencies without having to use another radio.

  • HAVE QUICK II (R&S®GS3006S)

    The NATO ground-air-ground waveform HAVE QUICK II provides interoperability in the EPM (ECCM) mode between the R&S®M3TR, R&S®M3AR, R&S®M3SR Series4400 radios and various types of legacy equipment.

  • Voice communications
  • Digital voice

    For communications under the EPM methods R&S®SECOM-V, R&S®SECOM-H, R&S®SECOM-P, and R&S®SECOS 5/16 TDMA, voice is transmitted in digital form. The following vocoders are available:

  • R&S®SECOM-V (R&S®GS3030S)
    • MELPe vocoder 2400 bit/s
    • AMBE vocoder 2400/4800/9600/16 000 bit/s
    • CVSD vocoder 16 000 bit/s

    MELPe is the standard vocoder for R&S®SECOM waveforms. It offers the best voice quality and is extremely insensitive to background noise. Due to their favorable characteristics, MELPe vocoders were also a preferred choice for military radiocommunications technology when defining STANAGs.
    AMBE is used for voice over data transmission under R&S®SECOM-V. It makes use of the R&S®SECOM-V 16 000 bit/s channel with vocoder-specific FEC. This voice mode provides reliable good-quality and jam-proof communications. The data rate can be selected on the HMI. The AMBE vocoder is ideal for the voice over data operating mode since it supports all R&S®SECOM-V data rates from 2400 bit/s to 16 000 bit/s.

  • R&S®SECOM-H (R&S®GS3001S)
    • MELPe vocoder 600 bit/s
    • MMBE vocoder 1200 bit/s
    • AMBE vocoder 2400 bit/s

    The 1200 bit/s vocoder was specially developed for the demanding task of setting up reliable links with good quality under the poor channel conditions usually found in the HF range (1.5 MHz to 30 MHz). As an integral component of the R&S®SECOM-H HF EPM waveform, it is optimized for use together with this frequency-hopping method. For interoperability with R&S®SECOM-V in rebroadcast applications, the 2400 bit/s vocoder can also be selected in the R&S®SECOM-H mode.

  • R&S®SECOM-P (R&S®GS3030S)
    • CVSD vocoder 16 000 bit/s
  • R&S®SECOS digital voice (R&S®GS3516S)
    • CVSD vocoder 16 000 bit/s
    • AMBE vocoder 16 000 bit/s
  • Data communications
  • HF wideband, MIL-STD-188-110C App. D and STANAG 5069 (R&S®GM4123S)

    Thanks to a harmonized, embedded HF wideband concept, the radios include HF wideband functionality to establish long-range data links on a 24 kHz channel and are already prepared for 48 kHz channels. Increased bandwidth (24 kHz or 48 kHz) offers flexibility in terms of data rate (up to 240 kbps) and robustness over a significantly wider range.
    HF wideband may be used to reliably link groups of vessels organized in local networks to a strategic backbone network, which avoids the need for SatCom or allows critical situation
    ns to be to overcome in a SatCom denied environment. The R&S®M3TR supports all currently planned HF wideband related waveforms and standards covered by NATO’s HF House.

  • Voice priority over data (VPoD)

    There is also a solution available for situations in which voice and data communications are simultaneously needed. Using VPoD, it is possible to interrupt an ongoing data link by simply pressing the push-to-talk key. Users can send emergency calls right from the ongoing data connection. After the emergency call is over, the radio returns to the original data transmission.

  • VPoD supported waveforms
    • R&S®SECOM-V
    • ALE 3G (STANAG 4538) xDL
  • STANAG 4285 data mode (R&S®GM4120S)

    For backward interoperability, the non-self-identifying STANAG 4285 modem waveform is available. STANAG 4285 is a low and medium-rate maritime HF waveform from 75 bit/s to 3600 bit/s.

  • STANAG 4539 data mode (R&S®GM4120S)

    The STANAG 4539 HF modem enables self-identifying (auto-baud) data communications (up to 12800 bit/s) in a 3 kHz channel in the HF frequency range.
    STANAG 4539 is based on more than one standardized modem waveform:

    • STANAG 4415 (very robust traffic waveform at 75 bit/s)
    • MIL-STD-188-110B (low and medium rate serial tone waveforms from 150 bit/s to 2400 bit/s)
    • MIL-STD-188-110B App. C (high data rate waveforms from 3200 bit/s to 12800 bit/s)
  • R&S®SECOS 5/16 TDMA (R&S®GS3516S)

    Data transmission with data rates of up to 16 000 bit/s is supported. Both TDMA and non-TDMA modes are implemented. For details on R&S®SECOS implementation in the R&S®R&S®M3TR, see the related Technical Information (R&S®SECOS).

  • R&S®SECOM-V data mode (R&S®GS3030S)

    In R&S®SECOM-V, data rates up to 16 000 bit/s are possible. User data rates span from 600 bit/s to 9600 bit/s depending on FEC share and number of retransmissions. R&S®SECOM-V uses binary continuous phase FSK modulation with a shift of 6.25 kHz. For detailed information, see the related Technical Information (R&S®R&S®SECOM-V).

  • 72 000 bit/s VHF/UHF modem (R&S®GS3030S)

    For mobile radiocommunications, military users often employ terminal equipment of narrow bandwidth and with limited channel capacity. Such equipment has limited data transmission capability. The new software-based highspeed modem for the R&S®M3TR allows the transmission of radio data at high rates:

    • Up to 72 kbit/s
    • Auto-baud capability

    The modem can be operated either using the integrated IP over air protocol or transparently via the serial interface. It supports 10 different waveforms with various data rates. All waveforms are operable in the VHF/UHF frequency range from 30 MHz to 512 MHz.

    The VHF/UHF modem user data rate ranges from 16 000 bit/s to 72 000 bit/s, depending on the set bandwidth.

  • IPoA – IP radio transmission

    R&S®IPoA embedded radio protocol provides transparent IP functionality over the air. It can be used to set up communications systems that require transparent connection of IP networks over radio links. Such radio links enable IP based applications – such as situational awareness or message handling systems – to exchange data.
    An R&S®MR300xH/R&S®MR300xU radio equipped with R&S®IPoA includes static IP router functionality. The network structure can be configured by entering IP subnets to be routed to different destinations over the air interface. This can be done very easily with the R&S®RNMS3000 network management system. In addition to the standard IP address of the physical Ethernet interface (which is used, for example, for remote control), a second IP address represents the radio’s air interface. Using the configuration tool, the network can be configured to route e.g. wired IP subnets to different destinations over the air interface. The radio can be connected via an Ethernet connector (RJ-45) to 10BASE-T and 100BASE-T network equipment (such as hubs, switches and routers) provided by the R&S®VT3050C and R&S®VK3150C compact power amplifiers. If R&S®IPoA functionality is to be used with manpack radios, the R&S®MR300xH/R&S®MR300xU data connector on the front panel must be used. For this application, the Ethernet interface can be software-configured to this connector.

  • IPoA protocol functionality

    The embedded R&S®IPoA protocol currently supports internet protocol version 4 (IPv4). An internal address mapping function ensures that data is delivered to the correct recipient. The IP packets are transmitted transparently over the radio channel. Data link performance depends on the current channel properties and propagation conditions of the radio link. An error detection mechanism prevents the protocol from delivering erroneous data to the connected network; further error correction techniques (e.g. ARQ secured data) are implemented.

  • GPS services
  • GPS reporting

    Operators can send their own position in a waveform-specific net (R&S®SECOM-V or R&S®SECOM-P). A dedicated radio (GPS controller) can poll positions of all other net members. The GPS controller can be connected to an external application (i.e. command and control software system) to make GPS information available on a digital map, for example. The external application can poll the GPS controller to get the latest GPS information of all members of the network.

    Transmission of GPS information
    The polling of GPS information is initiated by the GPS controller. After the transmission is initiated, all active GPS providers send their GPS information sequentially to the GPS controller. The transmission of GPS information can be switched on/off at the GPS controller. GPS reporting can be stopped in this way. Collisions between individual transmissions of GPS information are prevented.

    GPS controller
    The GPS controller is a manpack or vehicular radio (R&S®MR300xH/U). GPS controllers request the GPS information from the GPS providers either at a user's request or periodically.

    GPS position information
    The GPS controller stores the latest GPS information from each radio in an internal table. This table is updated each time GPS information is received by the GPS controller. The following GPS information is provided by each GPS provider radio:

    • Position (WGS84; GEO, UTM, MGRS)
    • Velocity
    • UTC time
    • Fix quality (number of satellites that are visible)
  • Built-in test system (BIT)

    All components of the R&S®M3TR radio system are equipped with a BIT system that provides three modes:

    • Power-on BIT (PBIT)
    • Initiated BIT (IBIT)
    • Continuous BIT (CBIT)

    PBIT is always performed after powering up the unit. The IBIT is executed when manually activated by the operator. The CBIT is continuously performed during operation.

    The BIT enables fault location down to the module level of functional groups.

    Faults are stored in a fault journal for later evaluation.

  • Channel/net memory

    A radio can store different presets containing radio link data:

  • Nets

    A net is a set of parameters specifying a configured FF or FH network containing all relevant data for link setup and traffic. Nets are stored in preset pages accessible by the rotary switch of the radio or by the keypad. Depending on the actual configuration, up to nine (R&S®MR3000P) or up to 99 (R&S®MR300xH/U) presets can be defined and stored in the radio.

  • Channels (R&S®MR300xH/R&S®MR300xU)

    A channel is a set of parameters specifying an FF channel (TX and RX frequency, modulation, RF power, etc.). Channel data can be stored in both the manual preset or in one of the remaining 99 presets. In total, 450 channels are available.

Благодарим вас.

Ваш запрос был успешно отправлен!

Мы свяжемся с Вами в ближайшее время.

Коллектив Rohde & Schwarz

Получить на тест

Введите текст запроса.
Введите свое имя.
Введите свое имя.
Введите действующий адрес электронной почты.
Введите название компании.
Введите город.
Введите почтовый индекс.

Укажите свою страну.
Согласие на получение маркетинговых материалов

Я хочу получать информацию от Rohde & Schwarz по


Что именно это означает?

Я соглашаюсь с тем, что ROHDE & SCHWARZ GmbH & Co. KG и предприятие ROHDE & SCHWARZ или его дочерняя компания, указанная на данном Веб-сайте, может обращаться ко мне выбранным способом (по электронной или обычной почте) с целью маркетинга и рекламы (например, сообщения о специальных предложениях и скидках), относящейся в числе прочего к продуктам и решениям в области контрольно-измерительной техники, защищенной связи, мониторинга и тестирования сети, вещания и средств массовой информации, а также кибербезопасности.

Ваши права

Настоящее заявление о согласии может быть в любое время отозвано путем отправки электронного письма с темой «Unsubscribe» (отказ от подписки на рассылку) по адресу: news@rohde-schwarz.com.Кроме этого, в каждом отправляемом вам письме имеется ссылка на отказ от подписки на рассылку будущих рекламных материалов.Дополнительная информация об использовании персональных данных и процедуре отказа от их использования содержится в Положении о конфиденциальности.

Введите символы, показанные на изображении
show captcha
Введена недействительная информация.
Обязательное поле Предоставляя свои персональные данные, я подтверждаю их достоверность и свое согласие на их обработку Обществом с ограниченной ответственностью «РОДЕ и ШВАРЦ РУС» (ОГРН 1047796710389, ИНН 7710557825, находящемуся по адресу: Москва, Нахимовский проспект, 58) в следующем объеме и следующими способами: обработку с использованием средств автоматизации и без таковых, сбор, систематизацию, классификацию, накопление, хранение, уточнение, обновление, изменение, шифрование с помощью любых средств защиты, включая криптографическую, запись на электронные носители, составление и переработку перечней и информационных систем, включающих мои персональные данные, маркировку, раскрытие, трансграничную передачу моих персональных данных, том числе, на территории стран всего мира, передачу с использованием средств электронной почты и/или эцп, в том числе, передачу с использованием интернет-ресурсов, а также обезличивание, блокирование, уничтожение, передачу в государственные органы в случаях, предусмотренных законодательством, использование иными способами, необходимыми для обработки, но не поименованными выше до момента ликвидации / реорганизации Компании либо до моего отзыва настоящего согласия.
Do not enter data in this field
Благодарим вас.

Ваш запрос был успешно отправлен!

Мы свяжемся с Вами в ближайшее время.

Коллектив Rohde & Schwarz

Узнать цену

Введите текст запроса.
Введите свое имя.
Введите свое имя.
Введите действующий адрес электронной почты.
Введите название компании.
Введите город.
Введите почтовый индекс.
Введите номер телефона.

Укажите свою страну.
Согласие на получение маркетинговых материалов

Я хочу получать информацию от Rohde & Schwarz по


Что именно это означает?

Я соглашаюсь с тем, что ROHDE & SCHWARZ GmbH & Co. KG и предприятие ROHDE & SCHWARZ или его дочерняя компания, указанная на данном Веб-сайте, может обращаться ко мне выбранным способом (по электронной или обычной почте) с целью маркетинга и рекламы (например, сообщения о специальных предложениях и скидках), относящейся в числе прочего к продуктам и решениям в области контрольно-измерительной техники, защищенной связи, мониторинга и тестирования сети, вещания и средств массовой информации, а также кибербезопасности.

Ваши права

Настоящее заявление о согласии может быть в любое время отозвано путем отправки электронного письма с темой «Unsubscribe» (отказ от подписки на рассылку) по адресу: news@rohde-schwarz.com.Кроме этого, в каждом отправляемом вам письме имеется ссылка на отказ от подписки на рассылку будущих рекламных материалов.Дополнительная информация об использовании персональных данных и процедуре отказа от их использования содержится в Положении о конфиденциальности.

Введите символы, показанные на изображении
show captcha
Введена недействительная информация.
Обязательное поле Предоставляя свои персональные данные, я подтверждаю их достоверность и свое согласие на их обработку Обществом с ограниченной ответственностью «РОДЕ и ШВАРЦ РУС» (ОГРН 1047796710389, ИНН 7710557825, находящемуся по адресу: Москва, Нахимовский проспект, 58) в следующем объеме и следующими способами: обработку с использованием средств автоматизации и без таковых, сбор, систематизацию, классификацию, накопление, хранение, уточнение, обновление, изменение, шифрование с помощью любых средств защиты, включая криптографическую, запись на электронные носители, составление и переработку перечней и информационных систем, включающих мои персональные данные, маркировку, раскрытие, трансграничную передачу моих персональных данных, том числе, на территории стран всего мира, передачу с использованием средств электронной почты и/или эцп, в том числе, передачу с использованием интернет-ресурсов, а также обезличивание, блокирование, уничтожение, передачу в государственные органы в случаях, предусмотренных законодательством, использование иными способами, необходимыми для обработки, но не поименованными выше до момента ликвидации / реорганизации Компании либо до моего отзыва настоящего согласия.
Do not enter data in this field
Благодарим вас.

Ваш запрос был успешно отправлен!

Мы свяжемся с Вами в ближайшее время.

Коллектив Rohde & Schwarz

Запросить информацию

Введите текст запроса.
Введите свое имя.
Введите свое имя.
Введите действующий адрес электронной почты.
Введите название компании.
Введите город.
Введите почтовый индекс.

Укажите свою страну.
Согласие на получение маркетинговых материалов

Я хочу получать информацию от Rohde & Schwarz по


Что именно это означает?

Я соглашаюсь с тем, что ROHDE & SCHWARZ GmbH & Co. KG и предприятие ROHDE & SCHWARZ или его дочерняя компания, указанная на данном Веб-сайте, может обращаться ко мне выбранным способом (по электронной или обычной почте) с целью маркетинга и рекламы (например, сообщения о специальных предложениях и скидках), относящейся в числе прочего к продуктам и решениям в области контрольно-измерительной техники, защищенной связи, мониторинга и тестирования сети, вещания и средств массовой информации, а также кибербезопасности.

Ваши права

Настоящее заявление о согласии может быть в любое время отозвано путем отправки электронного письма с темой «Unsubscribe» (отказ от подписки на рассылку) по адресу: news@rohde-schwarz.com.Кроме этого, в каждом отправляемом вам письме имеется ссылка на отказ от подписки на рассылку будущих рекламных материалов.Дополнительная информация об использовании персональных данных и процедуре отказа от их использования содержится в Положении о конфиденциальности.

Введите символы, показанные на изображении
show captcha
Введена недействительная информация.
Обязательное поле Предоставляя свои персональные данные, я подтверждаю их достоверность и свое согласие на их обработку Обществом с ограниченной ответственностью «РОДЕ и ШВАРЦ РУС» (ОГРН 1047796710389, ИНН 7710557825, находящемуся по адресу: Москва, Нахимовский проспект, 58) в следующем объеме и следующими способами: обработку с использованием средств автоматизации и без таковых, сбор, систематизацию, классификацию, накопление, хранение, уточнение, обновление, изменение, шифрование с помощью любых средств защиты, включая криптографическую, запись на электронные носители, составление и переработку перечней и информационных систем, включающих мои персональные данные, маркировку, раскрытие, трансграничную передачу моих персональных данных, том числе, на территории стран всего мира, передачу с использованием средств электронной почты и/или эцп, в том числе, передачу с использованием интернет-ресурсов, а также обезличивание, блокирование, уничтожение, передачу в государственные органы в случаях, предусмотренных законодательством, использование иными способами, необходимыми для обработки, но не поименованными выше до момента ликвидации / реорганизации Компании либо до моего отзыва настоящего согласия.
Do not enter data in this field
International Website