Search Application Notes & Cards
Learn how to configure Rohde & Schwarz products to fit your application. Search our database by product, technology, or application to find relevant technical documents.
Search Application Notes & Cards
Learn how to configure Rohde & Schwarz products to fit your application. Search our database by product, technology, or application to find relevant technical documents.
1106 Results
The R&S®ZVA vector network analyzer with the R&S®ZVA-K9 option enables absolute group delay measurements on devices with embedded LO without the need for a calibration mixer
17-May-2013
An ever-increasing requirement for data on mobile networks, driven by a myriad of applications from HD video on the move to autonomous vehicles and Industrial IOT, means a part of the new 5G network is to be deployed at mmWave frequencies, with a 26 GHz pioneer band defined for the UK between 24.25 - 27.5 GHz.This near 10-fold increase in frequency over 4G networks opens several challenges, both in the design and implementation of the required sub-components, network infrastructure and end user equipment, and in parallel in the test and measurement approaches used to drive these developments.In this presentation, we will introduce some of the main challenges in test and measurement of a device at these frequencies. We will then present the testing of a 26-28GHz pioneer band dual channel amplifier evaluation module using 5G NR test waveforms.
26-Nov-2018
Rapid and accurate verification of beamforming weights is required for example, for codebook generation or beamforming algorithm development or verification. This document describes the unique application of Rohde & Schwarz VNA (Vector Network Analyzers) to fully characterize the passive part of multi-element antennas intended for beamforming.A range of R&S VNA models are optionally equipped with multiple independent sources, whose relative amplitude and phase may be arbitrarily controlled ("defined coherence mode"), in addition to frequency and true time delay. These sources may be connected to individual elements of a multi-element antenna to derive and verify transmit (Tx) mode beamsteering and beamforming operation.The R&S®ZVA in "Defined Coherence Mode" can electronically be switched to / from the conventional S-parameter mode. Therefore, Sparameter and beamforming measurements may be performed efficiently within a single connection cycle of the antenna.Multiple VNA may be daisy-chained, to extend the concept shown to support an arbitrary number of ports.The R&S®Quickstep sequencing software may be downloaded from:https://www.rohde-schwarz.com/software/quickstep/
20-Mar-2017 | AN-No. 1MA278
What are the two key benefits of oscilloscopes with deep acquisition memory?
13-Dec-2017
This application note describes Methods of Implementation (MOI) for precise, fast, and error-free compliance testing of USB Type-C to legacy adapter assemblies supporting USB3.1 Gen1, and USB2.0. Based on 5 Gbps signaling per lane with vector network analyzers from Rohde & Schwarz.
18-Jan-2024 | AN-No. 1SL407
Rohde & Schwarz recognizes the potential risk of computer virus infection when connecting Windows®-based test instrumentation to other computers via local area networks (LANs), or using removable storage devices.This white paper introduces measures to minimize malware threats and discusses ways to mitigate risks while insuring that instrument performance is not compromised.The paper discusses the use of anti-virus software. It also outlines how to keep the Windows® 10 operating system properly updated through regular installation of OS patches.
23-Sep-2016 | AN-No. 1EF96
This application note provides information about spectral measurements with noise correction. The basic requirements and the limiting factors of a spectrum analyzer are explained. Dynamic range improvements by means of a noise correction is presented. Measurement examples show the improved performance of TOI measurements with noise correction.
25-Oct-2012 | AN-No. 1EF76
1SP01 Production Produktionstestsysteme- Funktionstest von Businesstelefonen Produktionstestsysteme- Funktionstest von Businesstelefonen 1SP01 Production Produktionstestsysteme- Funktionstest von Businesstelefonen Related products
08-Apr-2002 | AN-No. 1SP01
Version 1.3.1 of the DVB-T2 standard ETSI 302 755 introduced the T2-Lite profile to ease the implementation of mobile TV services. This was achieved by minimizing the complexity of the required receiver and allowing side-by-side integration into existing conventional (T2-Base) DVB-T2 channels. For the purposes of testing the compatibility and performance of receiver modules, this application note describes how this type of composite T2-Base/T2-Lite RF signal can be simulated using one R&S®BTC or alternatively two instruments from the family of broadcast signal generators comprised of the R&S®SFU, R&S®SFE, R&S®SFE100 and R&S®SFC. Only one corresponding multiple profile T2-MI stream is required, either in the form of a file or via an external gateway.
03-Feb-2014 | AN-No. 7BM81
This Application Note describes the differences in intermodulation distortion measurements between traditional spectrum analyzers with analog narrow-band IF signal path and modern spectrum analyzers using a wide-band IF signal path and digital RBW filters.
02-Jul-2012 | AN-No. 1EF79
Broadcasting transmitters are subject to particularly stringent standards with respect to broadcast signal quality, because even small faults can lead to service disruptions for many viewers. A single instrument, the R&S®ETL TV analyzer, performs all required ATSC transmitter measurements, from the initial acceptance testing for the transmitter, to measurements performed during commis-sioning and preventive maintenance.
13-May-2013 | AN-No. 7BM102
The Radiocommunication Tester CRTx can be used to test various aspects of GSM based mobile telephones. For this, a large number of testcases written in accordance with the GSM Rec. 11.10-1 are available. These tests are written in Borland C programming language, are supplied as source code, may also be modified by the user and are normally performed manually.
07-Mar-2002 | AN-No. 1CMAN30E
Are there really power peaks that are 20 dB above the average value? Yes, there are. Ever since the introduction of digital transmission technology, it has been necessary to deal with such orders of magnitude. RF power components must be suitably dimensioned to handle the expected voltage peaks and avoid breaking down. If we can determine the crest factor, i.e. the ratio of the peak value to the average or RMS value, with sufficient accuracy (even though it can only be assessed statistically), then we will have solved the question of dimensioning power components. This Application Note is intended to help with this problem by providing some useful insights including basic formulas, some statistical background and a practical look at the limiting factors when it comes to dealing with real transmitter systems.
22-Jan-2011 | AN-No. 7TS02
The terrestrial television standard DVB T2 is gaining in significance as a result of the growing scarcity of available frequencies. New systems are being tested in many countries around the world. Other countries have already completed the introductory phase for DVB T2. Broadcasting transmitters are subject to particularly stringent standards with respect to broadcast signal quality, because even small faults can lead to service disruptions for many viewers or even disrupt adjacent channels.A single instrument, the R&S®ETL TV analyzer, performs all required DVB-T2 transmitter measurements, from the initial acceptance testing for the transmitter, to measurements performed during commissioning and preventive maintenance.The measurements described here satisfy many country-specific and customer-specific test specifications. Users need only set the limit values accordingly.
24-Jul-2014 | AN-No. 7BM106
- not available -
20-Jul-2001 | AN-No. 7BM21
TeleZüri, Switzerland’s most successful regional TV station, has switched from tape-based operations to file-based workflows. At the same time, TeleZüri was introducing HD as standard resolution in its workflows.
18-Nov-2014
This application note discusses WLAN standard IEEE 802.11n. It first describes the most important amendments to previous releases and the ambitious new measurement tasks. Then, it describes how to deal with these tasks using Rohde & Schwarz instruments. The main focus here is on transmission over several TX and RX antennas (MIMO). Building multistandard signals using Rohde & Schwarz generators is also described. Screenshots from the analyzer taken on 802.11n signals complete the document.
26-Apr-2013 | AN-No. 1MA179
The MHL standard specifies the transmission of high-definition audio and video data on five individual lines, as well as the exchange of bidirectional control information and the supply of power from the sink to the source. Over 200 million portable CE devices - such as mobile phones, tablet PCs and cameras - already use this interface to present content onto larger screens. To ensure functionality and interoperability, every new MHL-capable device must, before entering the market, undergo thorough tests at an authorized test center (ATC) in line with the compliance test specification (CTS) issued by the MHL Consortium. This application note provides an overview of the MHL technology and also describes the Rohde & Schwarz compliance test solution for the system part of the current MHL2.0 standard version.
14-May-2013 | AN-No. 7BM83
- not available -
20-Jul-2001 | AN-No. 7BM18
based on SCPI command sequences
MINX – the Measurement Instrument Network eXplorer – is a fast, non-invasive discovery and configuration software from Rohde & Schwarz for LAN and USB T&M instruments.Agnostic of instrument model or manufacturer, MINX provides an intuitive graphical user interface with access to powerful configuration, control, results collection and remote display functions.Test or research engineers can quickly setup a collection of instruments to initialise, measure and download results. Universities can configure and manage many instruments together, copying instruments and saving class setups.Besides these core functions, MINX provides an extension mechanism making even more sophisticated instrument operations available by just the click of a single button. Such extended functions are SCPI-based command sequences which can be added by the user on a per-instrument basis and require no software update.This application note describes the different kind of extendable function groups. It will be pointed out how extended functions can be added or edited and which format the script must comply in order to get directly available in MINX.
12-Jan-2021 | AN-No. GFM344
This application note describes how the transmitter landscape of a DVB-T2 single-frequency network (SFN) can be simulated in multiple input single output (MISO) mode in order to test the compatibility and performance of receiver modules. Neither an external T2-MI gateway nor a GPS receiver is required - just an R&S®BTC equipped with two RF paths. Alternatively, one R&S®SFU coupled with one or more R&S®SFU, R&S®SFE, R&S®SFE100 or R&S®SFC can also be used. R&S®ETL or R&S®ETC are suggested to fine-tune the synchronization between the generated RF signals.
03-Feb-2014 | AN-No. 7BM80
7BM37 MPEG2,DVRG,Broadcasting,DTV Transfer of Video Stream Files to and from DTV Recorder Generator DVRG Transfer of Video Stream Files to and from DTV Recorder Generator DVRG 7BM37 MPEG2,DVRG,Broadcasting,DTV Transfer of Video Stream Files to and from DTV Recorder Generator DVRG Related products
31-Jul-2003 | AN-No. 7BM37
This application note is to provide a basic understanding as to the configuration and control of DVQ via an Ethernet link.
26-Apr-2001 | AN-No. 7BM04
- not available -
20-Jul-2001 | AN-No. 7BM16
In this whitepaper we describe the device to device communication in LTE from a UE point of view. Network elements are described as far as they concern the UE. In addition to the message transmission and reception, a special emphasis is put on the synchronization between UEs and on the security for the message exchange.
29-Sep-2015 | AN-No. 1MA264
It is frequently desired to process the results stored on the floppy on a PC, eg for the generation of customer-specific test reports by means of a word processing system. To enable processing on an external PC, the binary data usually need conversion into an ASCII format. This is possible by means of the ESXS2ASC.EXE program. The program is available free of charge from your Rohde & Schwarz representative.
18-Jan-2002 | AN-No. 1EE21
Long Term Evolution (LTE) technology has become the technology of choice for keeping up with the requirement of higher throughput in mobile communication in bands below 6 GHz. It is expected that within the next decade LTE will become the primary commercial standard. LTE is often used to broadcast emergency information in times of natural disasters and national crises and is under investigation for further end use application in government as well as military application fields.Communication via LTE has some vulnerabilities. This drawback is a matter of concern since it is possible to completely take down the LTE network or at least partially block communication, intentionally with the help of jamming signals, or unintentionally through various forms of interference.An example of unintentional interference issues is the frequently discussed co-existence issues with Air Traffic Control (ATC) S-band radar and Digital TV bands. The in-device co-existence challenge is also a potentially important issue with the rapid evolution of multi-standard radios.This White Paper will focus on the vulnerabilities of LTE communication by explaining LTE jamming and unintentional interference problems, address the coexistence issues with other services, and discuss the mitigation options to build a broad perspective on the possible deployment of the LTE technology for future military and civil governmental applications.Understanding the susceptance of new technologies to known and expected environments is critical to the adoption for defense applications
16-Sep-2014 | AN-No. 1MA245
This application note describes remote operation or monitoring of the R&S® RTO digital oscilloscope through a standard web browser. The common cross-platform technology Virtual Network Computing (VNC) is used as a server on the instrument.
27-Jul-2010 | AN-No. 1ER01
Broadcasting transmitters are subject to particularly stringent standards with respect to broadcast signal quality, because even small faults can lead to service disruptions for many viewers. A single instrument, the R&S®ETL TV analyzer, performs all required DVB-T / DVB-H transmitter measurements, from the initial acceptance testing for the transmitter, to measurements performed during commissioning and preventive maintenance.
13-May-2013 | AN-No. 7BM101