Search Application Notes & Cards
Learn how to configure Rohde & Schwarz products to fit your application. Search our database by product, technology, or application to find relevant technical documents.
Search Application Notes & Cards
Learn how to configure Rohde & Schwarz products to fit your application. Search our database by product, technology, or application to find relevant technical documents.
1118 Results
O-RAN makes radio access networks more open, disaggregated and flexible. O-RUs need to comply with 3GPP and O-RAN standards. Automation is crucial for extensive O-RAN conformance testing since O-RAN network elements are asynchronously released.
08-May-2024
Modern mobile phones can support cellular and noncellular wireless communications standards at the same time. This means, however, that the subsystems must operate in very close proximity to each other within a single device (in-device coexistence). The resulting high level of reciprocal leakage can at times cause considerable interference.This application note employs preliminary theoretical analysis and demonstrates how the problems of indevice coexistence can be measured. For german version please visit .
28-Apr-2015 | AN-No. 1MA255
The aim of this application note is to provide information regarding Rohde & Schwarz instrument drivers. This paper shall help application engineers and software developers to easily get an understanding of advanced techniques to develop test and measurement (T&M) applications by utilizing Rohde & Schwarz instrument drivers. Furthermore the nomenclature used for Rohde & Schwarz instrument drivers will be explained.
01-Jan-2013 | AN-No. 1MA153
This application note discusses the use of the WOOSHCOM® DHEI output interface adapter (model 3010), which converts the transport stream from DHEI format into DVB-ASI. Further processing and analysis of the transport stream signal then becomes available with any of the Rohde & Schwarz Test & Measurement instruments. It also describes how to extract an unencrypted transport streams out of a Motorola IRT.
08-Jun-2004 | AN-No. 7BM40
The following paragraphs are intended to show the capabilities of the Rohde & Schwarz Signal Generator SMT performing ILS and Marker Beacon receiver tests. The procedures presented should not be considered binding or mandatory. It is expected that the user once familiar with the use of SMT for VOR/ILS receiver tests will design and implement procedures which satisfy equipment and regulatory requirements.
06-Jul-1994 | AN-No. 1GPAN11
The R&S®SMBV100A vector signal generator offers a remote emulation feature that makes it possible to control the instrument by commands other than the built-in native SCPI commands. This feature allows the user to replace signal generators, e.g. from other manufacturers, with the R&S®SMBV100A without having to change the remote control code. This application note describes how to use the remote emulation feature in general. Furthermore, it describes in detail the remote emulation for each supported instrument, limitations of the individual emulations and the remaining differences between the emulated and the original commands.
11-Oct-2016 | AN-No. 1GP91
This application note illustrates the upgrade from the available wireless TV standard ATSC to its expansion ATSC Mobile DTV described in the new standard A/153 (ATSCM/H), in which Rohde & Schwarz has played a major development role. An upgrade package makes it possible to efficiently extend existing ATSC infrastructures for ATSC Mobile DTV services. A central component of the ATSC Mobile DTV equipment is the R&S®AEM100 multiplexer. Together with the R&S®AVE264 H.264 Encoders, digital TV exciter (R&S®SX800) and Transmitters, it forms a complete ATSCM/H system.
22-Sep-2009 | AN-No. 7EB02
In accelerator physics, pulsed signals frequently need to be measured. The digital trigger and low noise frontend of the R&S®RTO/RTP digital oscilloscope make it possible to perform the high precision measurements needed to characterize the experimental setup. Several measurement functions specially developed for accelerator physics labs support detailed signal analysis.
17-Dec-2013
The following application note describes the function and operation of user menus for FSE Spectrum Analyzers including option Vector Signal Analysis (FSE-B7). For measurements according to the PCS 1900 standard user menus are provided, which perform settings on FSE for Base Station testing required in the standard. The menu and the accompanying setups are stored on a floppy disk. For operation of the menus firmware version 1.40 or higher is required. Option Vector Signal Analysis FSE-B7 has to be installed for the use of the application menu.
17-Jan-2002 | AN-No. 1EF24
The R&S®Pulse Sequencer software offers a powerful mechanism to model sequences that are often required for meaningful radar receiver test cases. The sequences can consist of many individual elements, such as pulses defined by the software or imported waveform segments. The software’s powerful interpulse modulation mechanism gives the user full control of each single element.
03-Oct-2017
This document describes how a Windows®-based R&S® T&M instrument is remotely operated by an Apple iPad as if working on it locally. Step-by-step procedures are provided for setting up and configuring the T&M instrument and the iPad. On the iPad, a special App implements the Windows® 'Remote Desktop' functionality. T&M instrument and iPad are connected via WLAN (also denoted as Wi-Fi network).
28-Mar-2013 | AN-No. 1MA216
Unattended observation of spectrum occupancy for finding spurious emissions or seldom-occuring interferers is a common task for spectrum analyzers. Sometimes spectrum data has to be monitored over quite a long period of time. TraceRecorder, a small, free-of-charge software tool for storing measurement data from Rohde & Schwarz spectrum analyzers helps you to perform this measurement task. Running on a PC, it connects to the spectrum analyzer via a LAN interface. For stand alone operation, it is possible to run it directly on a spectrum analyzer, eliminating the need for an additonal computer during data acquisition.
08-Dec-2010 | AN-No. 1MA105
The R&S®CMX500 radio communication tester is ideal for testing the maximum possible IP throughput for mobile device transmitters and receivers.
13-Jun-2022
Electronic systems like electronic control units (ECU) must pass several stringent qualification tests in order to be approved for automotive use. These tests include a reverse polarity test which is specified as part of ISO 16750‑2. In line with the specification, the electronic module must withstand a negative supply voltage for a specific time without suffering any damage. The R&S®NGU401 source measurement unit (SMU) is ideal to perform this task, plus it provides automated testing capability.
23-May-2022
This application note shows how to remote control the switching of RF and digital I/O signals by R&S®OSP Open Switch and Control Platform directly from a Vector Network Analyzer (VNA) or from a Spectrum Analyzer (SA). The R&S®ZVA, R&S®ZVB, R&S®ZNB, R&S®FSW and R&S®FSV families are covered. The application note first describes the requirements and setup procedure. It is shown how to install the software and how to set up the system in order to get highest flexibility and best usability. It is then shown how to calibrate the entire configuration and finally some practical examples are provided. Switching is explained using VNAs as an example, the appendix 5.4 provides hints regarding the differences when using SAs in a similar way.
06-Dec-2013 | AN-No. 1MA226
This application note shows all necessary settings for measuring shielding effectiveness using the R&S®EMC32-K48 option via R&S®EMC32 Measurement Software.
01-Dec-2015 | AN-No. 1SP19
Signal monitoring has proven an effective technique when it comes to identifying and correcting quality problems in transmitted TV broadcast signals during broadcast operation. For a DVB‑T2 signal using multiple physical layer pipes (multi-PLP), a separate receiver is required to analyze each PLP. The R&S®DVMS digital TV monitoring systems are extremely flexible and can be configured to meet customer's needs – from sequential PLP monitoring systems with a single receiver to systems providing seamless, parallel multi-PLP analysis.
24-Jul-2012
Test time is a critical parameter when it comes to evaluating the cost of test.This application note describes typical spectrum analyzer measurements in production environments and discusses different approaches to speed them up.
17-Nov-2014 | AN-No. 1EF90
Simultaneous DL throughput verification and UL transmission testing with the R&S®CMW500
29-Jul-2009
This application note describes the software configuration, system calibration and test routine for EMC measurements according to the EMS standard IEC / EN 61000-4-6.
29-Mar-2007 | AN-No. 1SP33
This white paper introduces a novel attribute based architecture for VXIplug&play instrument drivers. The presented architecture uses the attribute based concept of IVI-C instrument drivers to introduce a two-layer design for VXIplug&play instrument drivers. Moreover the use of attributes is shown for the Rohde & Schwarz Spectrum Analyzer (rsspecan) instrument driver.
01-Dec-2012 | AN-No. 1MA170
This application note provides a brief introduction into the capabilities of the Rohde & Schwarz Vector Signal Generators (VSG) to create user defined digitally modulated signals called Custom Digital Modulation (CDM). Additionally an in depth description of the functions and the operation of the CDM-Toolbox is provided. The CDM-Toolbox is application software which allows an easy remote configuration of CDM signals on Rohde & Schwarz VSGs but also the creation of data list and control list files which are most useful to further extend the application area of CDM signals.
24-Jul-2017 | AN-No. 1GP96
Rohde & Schwarz presents a customizable solution for testing GNSS receivers to ensure a certain resilience against (legal) interference from neighboring bands.
18-Jul-2017
As phase noise becomes an increasingly important system-level specification for electronic test equipment, communications systems, and radar systems. It is not only important to quantify the noise produced by oscillators, but also the noise added by each component in the signal processing chain. This application note reviews the fundamentals of residual or additive noise and addresses measurement techniques for determining the amplitude (AM) and phase noise added by two-port devices such as: amplifiers, mixers, block frequency converters, multipliers, dividers, and frequency synthesizers.Additionally, the Rohde & Schwarz FSWP phase noise analyzer will be introduced and a discussion of residual noise measurement techniques for the above-mentioned devices will be provided.
09-Oct-2017 | AN-No. 1EF100
Sequencing of waveforms is a technique used to play back multiple test signals fast and flexibly using an arbitrary waveform generator (ARB). Multiple ARB waveforms can be combined to generate all kinds of test signals sequences. Switching from one waveform to the subsequent waveform in the sequence is instantaneous, which enables high-speed operation for production testing. This application note explains how to generate such signal sequences using vector signal generators from Rohde & Schwarz. The examples provided show the required instrument settings and possible fields of application for waveform sequencing.
29-Feb-2012 | AN-No. 1GP53
This application note describes how to measure balanced reflection mixed mode S-Parameters with a 2-port Network Analyzer like R&S® ZVL. The application note directly transfers S-Parameter Trace Data from R&S® Network Analyzers to Microsoft™ Excel™ using a direct connection like GPIB or LAN and does the mode conversion to Mixed Mode inside Excel™ with a VBA Macro.
14-Feb-2008 | AN-No. RSI05
The general characterization of complex DUTs such as amplifiers requires the measurement of several parameters. Some may require more than one test device or expensive equipment. Thanks to its versatility, the R&S®ZNL is an economic solution that can characterize a variety of DUTs both via network analysis and spectrum analysis.
17-Dec-2021
The combination of an SMIQ Signal Generator and an FSE / FSIQ Analyzer enables the most important transmitter and receiver tests on ICO user terminals in quality management and development. This application note presents a series of quick tests in unsynchronized, non-signalling mode. To facilitate integration of SMIQ and FSE / FSIQ into existing test systems, complex instrument settings are supplied as sets of IEC/IEEE-bus commands. Sample files with burst data for uplink and downlink signals allow the configuration, execution and optimization of the tests described, even without a DUT.
08-May-2000 | AN-No. 1MA23
People screening at airports, borders, high-security facilities and in other environments requires a balance between security effectiveness and respect for the privacy of individuals being screened. The R&S®QPS quick personnel security scanners deliver high-performance threat and contraband detection designed specifically to protect personal privacy and minimize intrusive secondary screening measures.
15-Apr-2019