Oscilloscopes Application Videos - Media Center

Tips and application examples

Looking for additional insight on a specific application or measurement technique? Pick your topic of interest, and click on the video.

Oscilloscopes – Designed for you. Not for the hype

Affordable digital oscilloscopes with outstanding features. Wowee, are we right?

29-Aug-2024

Embedding & Equalization with the R&S RTP Oscilloscope (Part 1)

Learn about key advantages of the Embedding and Equalization option of the R&S RTP & RTO6 oscilloscopes. Start with the Signal Configurator.

11-Jul-2024

Embedding & Equalization with the R&S RTP Oscilloscope (Part 2)

Learn how easy it is to configure a cable emulation within the Embedding setup dialog. For interface standards such as USB, necessary S-parameter files are included in the oscilloscope software.

10-Jul-2024

Embedding & Equalization with the R&S RTP Oscilloscope (Part 3)

The Eye Diagram is an effective tool to validate signal integrity. This video compares the eye diagram on a signal acquired at the output of a USB transmitter versus a waveform with some added cable emulation.

09-Jul-2024

Embedding & Equalization with the R&S RTP Oscilloscope (Part 4)

Learn how easy it is to configure a equalizer emulation within the Equalizer setup dialog. For interface standards such as USB, PCIe or DP, the necessary S-parameter files are included in the oscilloscope software.

08-Jul-2024

RTP Oscilloscopes with External Frontends (Part 1)

The R&S FE External Frontends extend the frequency range of the RTP Oscilloscope up to 170 GHz. No additional equipment is needed for this compact and fully calibrated solution. Learn how easy it is to configure a external frontend directly by the RTP GUI.

05-Jul-2024

RTP Oscilloscopes with External Frontends (Part 2 )

The R&S RTP oscilloscope offers a comprehensive set of tools for analysing widebad RF signals together with the external frontends downconverted. Start with powerful trigger events, responsive spectrum analysis or the unique IQ mode to prepare in depth signal analysis. .

04-Jul-2024

RTP Oscilloscopes with External Frontends (Part 3 )

The R&S VSE software offer a comprehensive set of analysis options for RF signal analysis. This video demonstrates how easy the VSE software can analyze a 5G FR2 signal that was captured and downconverted by the FE44S external frontend and acquired by the RTP oscilloscope.

03-Jul-2024

RTP Oscilloscopes with External Frontends (Part 4 )

The RTP oscilloscope can use up to 4 external frontends to acquire the respective IF signals for further analysis. Here we use two FE44S external frontends to test a 5G FR2 signal at 28 GHz. Signal analysis is performed by the R&S VSE software running directly on the RTP oscilloscope.

02-Jul-2024

RTP Oscilloscopes with External Frontends (Part 5 )

Use the R&S RTP Oscilloscope with the R&S External Frontend FE110SR to debug your automotive radar devices. This example demonstrates the analysis of a bursted radar chirp signal with the FFT and Spectrogram. Analysis with the R&S VSE software and the Transient option enhances the characterization of radar signals. Additionally, the acquisition of two FE110SR signals with a maximum bandwith of 10 GHz in a frequency range of 70 to 110 GHz is possible the RTP oscilloscope.

01-Jul-2024

PAM-N Analysis with the R&S RTP Oscilloscope (Part 1)

Learn about key advantages of the PAM-N analysis option on the R&S RTP & RTO6 oscilloscopes. Start with the Signal Configurator.

28-Jun-2024

PAM-N Analysis with the R&S RTP Oscilloscope (Part 2)

Learn about key advantages of the PAM-N analysis option on the R&S RTP & RTO6 oscilloscopes. In combination with the CDR option, obtain the fastest eye diagrams to characterize signal behaviour in seconds.

27-Jun-2024

PAM-N Analysis with the R&S RTP Oscilloscope (Part 3)

Learn about key advantages of the PAM-N analysis option on the R&S RTP & RTO6 oscilloscopes. In combination with the CDR option, obtain the fastest eye diagrams to characterize signal behaviour in seconds.

26-Jun-2024

Towards 6G: MIMO measurements up to 110 GHz

This video demonstrates signal transmission and analysis of a 2x2 MIMO signal at 90 GHz.

12-Mar-2024

O-RU energy efficiency testing

Watch this video and discover how the R&S NGP power supply units power the radio unit and monitor voltage and current statistics over time.

12-Mar-2024

Superior user experience. RTP - see the difference

Learn how easy it is to organize your waveforms and results with the RTP oscilloscope.

15-Aug-2022

Meet the R&S RTP Oscillscope

The R&S RTP is the most versatile multi-purpose oscilloscope.

15-Aug-2022

Quickly access your favourite tools. RTP - see the difference

Access your favourite scope functions most quickly via the toolbar.

15-Aug-2022

Automated measurements. RTP - see the difference

The RTP offers of more than 90 automated measurements, with statistical analysis and histogram and track display for data visualization. Learn to use it most easily.

15-Aug-2022

Differential signal math in real-time. RTP - see the difference

Benefit from differential and common mode signals beeing calculated in real-time.

15-Aug-2022

Compensate signal losses in real-time. RTP - see the difference

Compensate signal losses from test fixtures or cables in real-time.

15-Aug-2022

How does high update rate help? RTP - see the difference

Benefits from the RTP oscillscopes, offering the fastest update rate of maximum 750,000 waveforms/s.

15-Aug-2022

Serial bus decoding. RTP - see the difference

The 16 digital channels of the MSO option extend the measurement resources of the RTP. Use them for protocol-based triggering and decoding of low-speed interfaces such as I2C, SPI, MIL1553 or MIPI RFFE.

15-Aug-2022

Isolate signal details with precise digital trigger. See the difference

RTP oscilloscopes can trigger on signals as small as 1/1000th of a vertical division thanks to digital triggering and adjustable hysteresis.

15-Aug-2022

Accelerate your EMI debugging. RTP - see the difference

See on our debugging example how to use the powerful spectrum analysis with log display, peak list and limit lines for visualizing and evaluating the EMI emission.

15-Aug-2022

Trigger on Zones in real-time. RTP - see the difference

The RTP's Zone trigger allowes as the only oscilloscope in the world to isolate events in the time and the frequency domain.

15-Aug-2022

Powerful spectrum and spectrogram. RTP - see the difference

Use the accuracy of the RTP for the analysis of wide-band RF signals.

15-Aug-2022

Phase-coherent multichannel pulse analysis

Scalable easy-to-configure solution for Radar/EW systems for accurate and phase-coherent analysis of multiple pulsed signals.

20-Jan-2021

I²C Debugging with hardware trigger of RTO

How to identify and trace down errors in I²C interfaces using the Hardware Trigger together with History Mode.

13-Feb-2020

UART/RS232/RS485 Triggering on Break condition

Use the hardware trigger to isolate break conditions. Break conditions can be corellated with their root cause one by one using the History Mode.

13-Feb-2020

In depth analysis of your RS232 interface

In depth analysis of RS232 interfaces frame by frame using the R&S®RTO decode table and zoom window.

13-Feb-2020

Debug RS232, RS485 or UART interfaces

Let your Oscilloscope decode your UART/RS232/RS485 interfaces for you! So you can quickly understand the data and correlate the data content with the electrical signal.

13-Feb-2020

Possibilities provided by the I²C decode protocol

Dive into your protocol to check for any problems with your I²C interface.

13-Feb-2020

The right set up to Decode I²C with an oscilloscope

Discover how to easily decode I²C with the right setup, as shown on an R&S®RTO.

13-Feb-2020

Advanced Jitter Analysis with R&S Oscilloscopes

Novel signal model based jitter decomposition algorithm

21-Jan-2020

TDR/TDT Analysis with R&S Oscilloscopes

Impedance and transmission loss measurements

21-Jan-2020

Energy measurement of a pulsed signals

Learn how to measure the energy of a pulsed sine wave signal with advanced math functions.

09-Sep-2019

Advanced correction of integral math waveforms

Learn how to remove 1/f noise in an integral math waveform for analyzing sinusoidal or pulsed signas with advanced math functions.

09-Sep-2019

IQ Mode for RF Signal Analysis

Downconvert RF signals in the oscilloscope and use resulting IQ sample for further analysis with the R&S VSE software or external tools.

09-Sep-2019

77 GHz Automotive Radar (part 1)

Learn more about the basic test setup of aautomotive radar device with a High-Performance RTP Oscilloscope.

08-Sep-2019

77 GHz Automotive Radar (part 2)

Deembed converters and other setup components in realtime.

07-Sep-2019

77 GHz Automotive Radar (part 3)

Demodulate radar pulses with built-in oscilloscope functions.

06-Sep-2019

77 GHz Automotive Radar (part 4)

Perform phase-coherent measurements on multiple antenna signals.

05-Sep-2019

Campus Dashboard - Setup & Configuration

Learn how to setup and configure our software for multi-user student labs

17-Jul-2019

Campus Dashboard - Key Functions

Learn more about key functions of R&S Campus Dashboard software.

17-Jul-2019

Campus Dashboard - Introduction

Time-saving teaching-software for multi-user student labs

27-Mar-2019

Power integrity for distributed systems

This session provides an insight into system-level issues and effective measurement and analysis techniques for achieving optimum system performance with rival requirements.

25-Mar-2019

Clock and LO components in 5G base stations (part 2/3)

Learn how to verify the performance of RF sampling clock generator / jitter attenuator with low noise signal generator and high-performance oscilloscope.

10-Feb-2019

Decoding CAN Flexible Data CAN-FD bus with a handheld oscilloscope

Discover how to easily deocde CAN-FD using an R&S®RTH handheld oscilloscope.

04-Feb-2019

Decode CAN bus with a handheld oscilloscope

Discover how to easily deocde a CAN bus using an R&S®RTH handheld oscilloscope.

04-Feb-2019

EMI debugging with an oscilloscope

Discover how to debug a power supply using a near field probe and a gated FFT, as shown on an R&S®RTO.

04-Feb-2019

Decode Flexray with an oscilloscope

Discover how to easily decode Flexray using an R&S®RTO.

04-Feb-2019

Decoding SENT bus signal

Discover how to easily deocde SENT using Rohde and Schwarz oscilloscopes, as displayed on an R&S®RTO.

04-Feb-2019

Current probe measurements with correct grid annotation

Discover how to easily make current probe measurements ith correct grid annotation on an R&S®RTO.

04-Feb-2019

Debug CAN flexible data CAN-FD interfaces with an oscilloscope

Discover how to debug CAN-FD, as displayed on an R&S®RTO.

04-Feb-2019

Triggering and decoding fast channel and slow channel of the SENT bus

Discover how to decode SENT, including enhanced serial messages, displayed on an R&S®RTO.

04-Feb-2019

Serial bus decoding capability with an Oscilloscope

Discover the powerful decoding capability of Rohde and Schwarz oscilloscopes, as displayed on an R&S®RTO

04-Feb-2019

Debug CAN interfaces with an oscilloscope

Discover how to debug CAN interfaces, as displayed on an R&S®RTO.

04-Feb-2019

CAN-dbc: symbolic decoding of CAN bus

Discover how to translate decoded hex values into useful words, as displayed on an R&S®RTO.

04-Feb-2019

Probing a differential bus with huge common mode

Discover the best probing method for differential buses, as displayed on an R&S®RTA connected to a differential CAN bus.

04-Feb-2019

Decoding over three minutes of bus data using deep memory and ultrasegmentation

Discover how to decode bus data using deep memory and ultrasegmentation, as displayed on an R&S®RTA.

04-Feb-2019

Decoding SENT bus with a handheld oscilloscope

Discover how to easily deocde SENT using an R&S®RTH handheld oscilloscope.

04-Feb-2019

Symbolic decoding of a SENT bus

Discover how to set up symbolic decoding of a SENT bus, as displayed on an R&S®RTO.

04-Feb-2019

Decoding LIN with an oscilloscope

Discover how to decode LIN, as displayed on an R&S®RTA.

04-Feb-2019

Stimulate your device with the built in pattern generator

Discover how to simulate your device under test with a built in pattern generator on the R&S®RTA.

04-Feb-2019

Decoding a CAN Bus

Discover how to decode a CAN Bus with an R&S®RTO, as well as looking at transmission errors and electric signal quality.

04-Feb-2019

Trigger in frequency domain to with the Zone Trigger to capture burst signals

Discover how to easily capture the RF burst from a keyfob using an R&S®RTO.

04-Feb-2019

Serial bus decoding capability with an Oscilloscope

Discover the powerful decoding capability of Rohde & Schwarz oscilloscopes, as displayed on an R&S®RTM..

01-Feb-2019

Decoding a CAN Bus

Discover how to decode a CAN Bus with an R&S®RTM, as well as looking at transmission errors and electric signal quality.

01-Feb-2019

Decoding over a minute of bus data using deep memory

Discover how Rohde & Schwarz oscilloscpes with deep memory can record over a minute of CAN bus data, as displayed on an R&S®RTO.

01-Feb-2019

Triggering on a CAN Bus

Discover the Bus trigger capability of Rohde and Schwarz oscilloscopes, as displayed on an R&S®RTO or an R&S®RTM.

01-Feb-2019

Decoding CAN Flexible Data CAN-FD bus

Discover how to decode CAN-FD using a R&S®RTO, as well as looking at transmission errors and electric signal quality.

01-Feb-2019

1000BASE-T1 cable testing according to OPEN Alliance TC9

A guide to perform cable testing based on unshielded twisted pair (UTP) for 1000BASE-T1 based on the OPEN Alliance TC9 specification.

03-Jan-2019

Integrated arbitrary waveform generator

Every R&S®RTO can be enhanced to include a 100 MHz arbitrary waveform generator.

17-Dec-2018

Precise measurement due to very low noise level

Minimizing noise was a key goal when designing the R&S®RTO. The result: precise measurements even at the smallest vertical resolutions.

29-Nov-2018

Up to 16 bit vertical resolution

The low-noise frontend and 10 GHz single-core A/D converter are the foundation for the extraordinarily high measurement accuracy and dynamic range of the R&S®RTO oscilloscopes.

29-Nov-2018

First zone trigger in time and frequency domain

The R&S®RTO oscilloscopes’ zone trigger lets you graphically separate events.

29-Nov-2018

Flat frequency response for accurate measurement results

The flat frequency response ensures accurate signal acquisition over the R&S®RTO oscilloscope's entire specified bandwidth.

29-Nov-2018

Decoding automotive Ethernet and CAN using R&S scopes

A comparisson between CAN decoding on the R&S®RTM oscilloscope with automotive Ethernet decoding using the K57 option on the R&S®RTO oscilloscope.

28-Nov-2018

Powerful 100BASE-T1 decoding

Decoding details for 100BASE-T1 Automotive Ethernet using the R&S®RTO with K57 option.

28-Nov-2018

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Marketing permission

Your request has been sent successfully. We will contact you shortly.
An error is occurred, please try it again later.