Dimensions |
without handles |
445 mm × 176 mm × 307 mm (17.5 in × 6.9 in × 12.1 in) |
Weight |
|
12.0 kg (26.5 lb) |
R&S®VTE base unit
|
Dimensions |
without handles |
232 mm × 132 mm × 307 mm (3 HU) (9.1 in × 5.2 in × 12 in) |
Weight |
|
6 kg (13.28 lb) |
R&S®VTS base unit
|
Dimensions |
without handles |
229 mm × 44 mm × 406 mm (9.02 in × 21.42 in × 15.98 in) |
Weight |
|
4 kg (8.81 lb) |
MHL extension
|
R&S®VT-B2350 MHL RX/TX
|
Interface |
|
MHL in (HDMI type A), MHL out (micro USB), HDMI out (type A, auxiliary) |
MHL standard |
|
MHL 1.4/2.2 |
MHL analysis |
Basic data |
|
video formats and timing (24-bit mode), audio formats and sampling rates, HDCP parameters, CBUS lock status |
CEA-861E InfoFrames |
|
AVI, audio, SPD and MPEG InfoFrame interpretation |
Decoding |
|
on-screen video, internal audio playout |
MHL generation |
Patterns |
|
static test patterns (all MHL video resolutions; 24-bit mode/PackedPixel mode) |
Audio |
|
test tones (all PCM audio formats and sampling rates) |
EDID reader |
|
display of EDID data |
R&S®VT-B2351 MHL RX PackedPixel
|
Interface |
|
MHL in (HDMI type A), HDMI out (type A, auxiliary) |
MHL standard |
|
MHL 1.4/2.2 |
MHL analysis |
Basic data |
|
video formats and timing (PackedPixel mode), audio formats and sampling rates, HDCP parameters, CBUS lock status |
CEA-861F InfoFrames |
|
AVI, audio, SPD and MPEG InfoFrame interpretation |
Decoding |
|
on-screen video, internal audio playout |
R&S®VT-K355 MHL CTS sink test
|
MHL CTS sink tests |
in line with CTS 1.4/2.2 section 4.2 |
4.2.1 to 4.2.3, 4.2.5 to 4.2.9 |
MHL CTS dongle tests |
in line with CTS 1. 4/2.2 section 5.2 |
5.2.1 to 5.2.3, 5.2.5 to 5.2.9 |
R&S®VT-K2355 MHL CTS source test
|
|
in line with CTS 1.4/2.2 section 3.2 |
3.2.2 to 3.2.4, 3.2.6 to 3.2.10 |
R&S®VT-K2356 CBUS tracer
|
|
sending and receiving of MSC, RCP, RAP, UCP commands |
HDMI extensions
|
R&S®VT-B2362 HDMI CTS RX/TX 600 MHz
|
Interface |
|
HDMI in (HDMI type A), HDMI out (HDMI type A) |
HDMI standard |
|
HDMI 2.0 (6G mode) |
TMDS character rate |
|
up to 600 Mcsc |
HDMI analysis (CTS source test only, see R&S®VT-K2365 HDMI CTS source test) |
Hot plug detect (HPD) |
|
switchable on/off |
Input parameter measurements |
|
pixel clock state TMDS character clock |
HDMI analysis (CTS sink test only, see R&S®VT-K365 HDMI CTS sink test) |
HotPlug detect (HPD) |
|
status |
R&S®VT-B2360 HDMI RX 225 MHz, R&S®VT-B2361 HDMI RX 300 MHz
|
Interface |
|
HDMI in (HDMI type A), HDMI out (auxiliary), S/PDIF in (optical) |
HDMI standard |
|
HDMI 2.0 (3G mode) |
TMDS character rate |
|
up to 300 Mcsc |
HDMI analysis |
Basic data |
|
video formats and timing up to 4K, audio formats and sampling rates, HDCP parameters |
CEA-861F InfoFrames |
|
AVI, audio and HDMI vendor-specific InfoFrame |
Decoding |
|
on-screen video, internal audio playout |
R&S®VT-K2365 HDMI CTS source
test
|
in line with HDMI CTS 1.4 in line with HDMI CTS 2.0 |
7-1, 7-16 to 7-19, 7-23 to 7-40 HF1-31, HF1-33, HF1-35, HF1-51 available with R&S®VT-B2362: HF1-13, HF1-10, HF1-11, HF1-12, HF1-21, HF1-22, HF1-32, HF1-14, HF1-15, HF1-16, HF1-24, HF1-25, HF1-26, HF1-34, HF1-35, HF1-41, HF1-36, HF1-37, HF1-38, HF1-39, HF1-40, HF1-47, HF1-48, HF1-49, HF1-18, HF1-28, HF1-52 |
R&S®VT-K2366 CEC tracer
|
|
sending and receiving of CEC commands |
R&S®VT-B360 HDMI TX 300 MHz
|
Interface |
|
4x HDMI out, |
HDMI standard |
|
HDMI 2.0 (3G mode) |
TMDS character rate |
|
up to 300 Mcsc |
HDMI generator |
Basic data |
|
video formats (HDMI, DVI) , audio generator, HDCP parameter, hot plug status |
Patterns |
|
static test patterns (up to 4K) |
Audio generator |
|
test tones (all PCM audio formats and sampling rates) |
CEA-861F InfoFrames |
|
AVI, audio and HDMI vendor-specific InfoFrame |
Audio return channel analysis on port 1 |
|
R&S®VT-K2150 audio analysis |
R&S®VT-K365 HDMI CTS sink test
|
in line with HDMI CTS 1.4 in line with HDMI CTS 2.0 |
8-15 to 8-25, 8-29 to 8-30 HF2-9, HF2-23, HF2-26, HF2-25, HF2-31, HF2-32, HF2-35, HF2-39, HF2-41, HF2-53 available with R&S®VT-B2362: HF2-5, HF2-24, HF2-6, HF2-7, HF2-8, HF2-36, HF2-37, HF2-38, HF2-25, HF2-10 |
Time domain analyzer extensions
|
R&S®VT-B2380 TMDS time domain analyzer module
|
Interface |
|
CLK in (SMA), CH+/CH– in (SMA), CONTROL in/out |
Analog bandwidth |
|
DC to 13 GHz (typ. –3 dB) |
Converter resolution |
|
8 bit |
Eye scope |
cursor mask horizontal histogram vertical histogram |
data 0+ and 0– data 0+ and GND, data 0– and GND data 1+ and 1– data 1+ and GND, data 1– and GND data 2+ and 2– data 2+ and GND, data 2– and GND |
R&S®VT-K2385 HDMI CTS source test (elec.) |
similar to HDMI CTS 1.4 similar to HDMI CTS 2.0 limitations due to different measurement principle |
7-1, 7-2, 7-3, 7-4, 7-6, 7-7, 7-8, 7-10, 7-11, 7-12, 7-13 and 7-15 HF1-1, HF1-2, HF1-3, HF1-4, HF1-5 and HF1-6 |
R&S®VT-Z2385 HDMI type A TPA test adapter (plug)
|
Interface |
|
HDMI in (HDMI type A plug), CLK out (SMA), CH+/CH– out (SMA), CONTROL in/out |
High-definition multimedia standard |
|
HDMI 1.4/HDMI 2.0 |
Analog A/V extension
|
R&S®VT-B2370 analog AV RX
|
Interfaces |
|
composite (1 × BNC) component (6 × BNC) audio L/R (2 × BNC) video H-Sync/V-Sync |
Analysis |
|
requires complementary media content analysis option(s) |
R&S®VT-K2371 component support
|
|
activation of component inputs |
Complementary media analysis options
|
R&S®VT-K2100 HDMI type A TPA test adapter (plug)
|
Videoscope |
|
single, parade and overlay waveform view; marker and delta marker for timing and level measurements |
Vectorscope |
|
color measurements, RGB pixel values |
R&S®VT-K2101 video measurements
|
|
automated signal parameter measurements of noise, frequency response, linear and non-linear distortions for composite and component signals |
R&S®VT-K2111 A/V distortion analysis
|
|
picture difference analysis, PSNR, SSIM, picture failure point, picture freeze, black frame, dropped frames, pixel errors |
R&S®VT-K2150 audio analysis
|
|
level, THD+N, frequency response, signal to noise ratio(SNR), crosstalk, interchannel phase |
R&S®VT-K2151 compressed audio support
|
|
channel status bit view, built-in decoding for compressed audio content in line with AC3, EAC3, Dolby™ TrueHD, MPEG-1/2 and MPEG-2/4 AAC |
R&S®VT-K2158 PESQ measurement
|
|
in line with ITU-T P.862 |
R&S®VT-K2159 POLQA measurement
|
|
in line with ITU-T P.863 |
Modulator extensions
|
R&S®VT-B600 broadcast TX modulator
|
RF characteristics |
Frequency range |
base unit, with R&S®VT-K3083 option |
30 MHz to 900 MHz 30 MHz to 3000 MHz |
Frequency setting resolution |
|
1 Hz |
Level setting range |
base unit, with R&S®VT-K3084 option |
–31.5 dBm to 0 dBm RMS for DVB-T –110 dBm to 0 dBm RMS for DVB-T |
MER |
for OFDM modulation |
> 40 dB |
Modulation systems
|
Terrestrial TV and mobile TV |
|
DVB-T2, DVB-T, DVB-H, DTMB, CMMB, T-DMB, ISDB-T, ISDB-TB, ISDB-T 1 seg., ATSC/8VSB, ATSC-M/H, MediaFLO™ |
Cable TV |
|
DVB-C2, DVB-C, ISDB-C, J.83/B |
Satellite TV |
|
DVB-S2, DVB-S, DIRECTV |
Analog TV |
|
B/G, D/K, I, M/N, L |
Audio broadcasting |
|
DAB, DAB+, ISDB-TSB, FM mono, FM stereo with RDS |
Additional functionality |
Transport stream player |
file format |
TRP, T10, ETI, FLO, MFS, PMS, BIN |
Audio/video generator |
file format |
Rohde & Schwarz proprietary |
AWGN |
signal-to-noise ratio (SNR) |
–30 dB to +60 dB |