234 Results
Rohde & Schwarz user manual for the Satellite Navigation GPS/Galileo/GNSS/GLONASS, NavIC, BeiDou,SBAS/QZSS application of the R&S®SMBV100B; options R&S®SMBVB-K44/-K66/-K94/-K97/-K98/-K106/-K107/-K108/-K109/-K132/-K133/-K134/-K135/-K136/-K137.
Rohde & Schwarz user manual for the IEEE 802.11 WLAN application of the R&S®SMBV100B, including IEEE 802.11 a/b/g/n, IEEE 802.11ac, IEEE 802.11ax, IEEE 802.11be; options R&S®SMBVB-K54/-K86/-K142/-K147.
R&S®SMBV100B 500 MHz modulation bandwidth To satisfy the need for higher modulation bandwidths, the R&S®SMBV100B is equipped with a high performance baseband.
conducted conformance testing according to TS 38.141-1, Rel. 15
This application note describes how all mandatory RF receiver tests can be performed quickly and conveniently with signal generators from Rohde & Schwarz.
02-Dec-2020 | AN-No. GFM314
Rohde & Schwarz Application Sheets for generating test signals for Dual Cell HSDPA (DC-HSDPA) operation.
Rohde & Schwarz Operating Manual for the Satellite Navigation (GPS/A-GPS/GPS P-Code/Galileo/GNSS/GLONASS, BeiDou, QZSS) application of the signal generator R&S®SMBV100A; options R&S®SMBV-K44/-K65/-K66/-K67/-K91/-K92/-K93/-K94/-K95/-K96/-K101/-K102/-K103/-K105/-K107/-K110
Rohde & Schwarz user manual for the EUTRA/LTE application of the R&S®SMBV100B, including Rel.9, Rel. 10, Rel. 11, Rel. 12, Rel. 13, Rel. 14, Rel. 15, IoT, U-plane; options R&S®SMBVB-K55/-K69/-K81/-K84/-K85/-K112/-K113/-K115/-K119/-K143/-K146/-K175.
This application note provides a brief introduction into the capabilities of the Rohde & Schwarz Vector Signal Generators (VSG) to create user defined digitally modulated signals called Custom Digital Modulation (CDM).
24-Jul-2017 | AN-No. 1GP96
This application note describes how all required transmitter (Tx) tests can be performed quickly and easily by using signal and spectrum analyzers.
11-May-2016 | AN-No. 1MA154
Importing Data in ARB, Custom Digital Modulation and RF List Mode
22-Dec-2010 | AN-No. 1GP62
The first part of this educational note presents the applications for and the most important types of signal generators. This is followed by a description of the construction and functioning of analog and vector signal generators.
03-May-2016 | AN-No. 1MA225
Rohde & Schwarz Operating Manual for the EUTRA/LTE application of the signal generator, including LTE Rel. 9, LTE-A Rel. 10, LTE Rel. 12, LTE Rel. 13, LTE Rel. 14, Cellular IoT and NB-IoT; options R&S®SMBV-K55/-K84/-K85/-K112/-K113/-K115/-K119
SMBV100A Vector Signal Generator, Video Whether in the R & D lab or in production, the global navigation satellite system (GNSS) solution for the R&S®SMBV100A sets new standards in the field of satellite simulation
19-Apr-2024
Rohde & Schwarz and VIAVI support European OTIC in Berlin for O-RAN conformance certificationThe European OTIC in Berlin at the i14y Lab finalized their first successful certification of an O-RAN radio unit according to O-RAN ALLIANCE. The i14y Lab has relied on the integrated solution for O-RU conformance testing by Rohde & Schwarz and VIAVI.
12-Feb-2018
Validate the performance of eCall modules with new GNSS performance test solution from Rohde & SchwarzRohde & Schwarz presents a new GNSS performance test solution to validate the performance of eCall modules. A new option for the R&S SMBV100A vector signal generator delivers standard-compliant, fully automated performance tests for the GNSS receiver integrated in the eCall module.
The R&S MATLAB® Toolkit for Signal Generators provides scripts and routines for remote controlling Rohde & Schwarz signal generators. For example, it includes a MATLAB® script that turns I/Q vectors into the R&S waveform file format for use with an ARB generator.
26-Apr-2013 | AN-No. 1GP60
I have found two informations reagarding the external reference for my signal Generator. One is the frequency locking range in the specifications.
FAQ. TS8997 waveform files on the vector generator not found
Rohde & Schwarz user manual for the R&S®Pulse Sequencer (DFS), option R&S®nnn-K350, comprising instructions on how to generate test signals and description on the supported radar test patterns.
This application Note is based on CMW500, SMBV100B and Vector CANoe.Car2x Software and guides to how to simulate the specific Cellular Vehicle-to-Everything (C-V2X) wireless environment in respect to road transport scenarios and transmitted messages around the Device Under Test (DUT) like a Telematics Control Unit (TCU). It shows how to verify and validate the C-V2X application of the DUT in laboratory environment. The virtual simulation scenario is not limited to the requirements of CSAE53-2017 specification, and it could be modified by user according to this operating guide with CANoe.Vehicle-to-everything (V2X) is a new generation of information and communications technologies that connect vehicles to everything. The objective of V2X is to increase road safety and manage traffic efficiently.C-V2X is designed to offer low-latency vehicle-to-vehicle (V2V), vehicle-to-roadside infrastructure (V2I) and vehicle-to-pedestrian (V2P) communications services to add a new dimension to future advanced driver assistance systems (ADAS). C-V2X as one communications standard defined by 3GPP in Release 14 uses LTE technology as the physical interface for communications. The standard describes two types of communications. The vehicle-to-network (V2N) communications type, exploits the cellular Uu interface, uses traditional cellular link to enable cloud services to be integrated into end-to-end solutions, e.g. to allow road and traffic information for a given area to be distributed to the vehicles.The second type is referred to as direct or PC5/Sidelink (V2V, V2I, V2P) communications, where data transmission takes place over the PC5 interface. In that type, C-V2X does not necessarily require a cellular network infrastructure. It can operate without a SIM and without network assistance and uses GNSS as its primary source for time synchronization.Verifying system functionality and performance exclusively by field testing in a real-world environment can be time-consuming, costly and very challenging. Requirements regarding functionality, and consequently the required assistance functions, are constantly changing. Due to this fact, test solutions are needed during the development and introduction phase to verify compliance with the standards. The PC5 direct communications type allows exchange of time sensitive and safety relevant information. Using a mobile communication tester like the R&S® CMW500 together with a C-V2X scenario simulation tool delivers reproducible test scenarios. This is essential for the standardization of verification processes for C-V2X in order to obtain reliable and comparable results, and it helps to demonstrate that end-to-end functionality between two C-V2X devices from different vendors works properly.
02-Jun-2021 | AN-No. GFM341
Rohde & Schwarz software manual for the Pulse Sequencer, including how to create pulses, sequences and multi-segment waveforms, option R&S nnn-K6.
Rohde & Schwarz user manual for the Pulse Sequencer Software for signal generators (options R&S®Snn-K30x), comprising instructions on how to create pulses and sequences, define antenna scans, emitters and receivers and create complex scenarios.
This application note provides a brief summary of the transmission modes (TM) in LTE and describes the beamforming measurements for base stations (BS) and user equipment (UE). The T&M options using various Rohde & Schwarz instruments are also presented.
26-Apr-2013 | AN-No. 1MA187
Rohde & Schwarz user manual for the Satellite Navigation (GPS/Galileo/GLONASS/Beidou) application for R&S®WinIQSIM2; options R&S®nnn-K244/-K266/-K294/-K407
Rohde & Schwarz User Manual for the HIL application of the signal generator R&S®SMW200A; option R&S®SMW-K109.
Spurious signals during RF level sweep
MWC2019, CMW500, SMBV100B, SMBV100A, c-V2X testing, cellular V2X Vector CANoe, GSMA, Mobile World Congress Testing critial V2X traffic scenarios in the lab is important for the automotive industry.
Option Error message 'manually disabled: for test only'
Interruptions in the RF level when the signal changes
Easy remote control of latest Rohde&Schwarz signal generators