44 Results
R&S®ZNC/ZND User Manual
Rohde & Schwarz User Manual for the R&S®ZNC/ZND Vector Network Analyzer
R&S®ZNB/ZNBT/ZNC/ZND Instrument Security
Instrument Security for R&S®ZNB/ZNBT/ZNC/ZND
Remote Desktop screen size of ZNB/ZND
Remote Desktop screen size of ZNB/ZND
ZNB/ZND - wrong connector type shown at Cal Unit Characterization
ZNB/ZND - wrong connector type shown at Cal Unit Characterization
ZNA, ZNB, ZND - Power off after stop of the Sweep?
ZNA, ZNB, ZND - Power off after stop of the Sweep?
R&S®ZNC/ZND Getting Started
Rohde & Schwarz Getting Started with the R&S®ZNC/ZND Vector Network Analyzer
Is the auto cal unit ZV-Z53 with 75 Ohms accepted from ZNB/ZND/ZVA?
I want to do a calibration with 75 Ohms at the ZNB/ZND/ZVA. Do these VNAs accept the auto cal unit ZV-Z53 with 75 Ohms impedance?
ZNA/ZNB/ZND - Export of all Traces of a channel into a CSV file via remote control
How can I export the traces of a specific channel into one file, i.e. CSV?
ZNA, ZNB, ZND, ZNL – Export of time domain trace
When I export the time domain trace the stimulus values are in Hz, but not in seconds as shown on the screen. How can I get the export in time or distance?
ZND/ZNB - loading of a s2p file for deembedding with remote commands
I need to activate the deembedding function on a specific port. The data is available on a touchstone file (s2p) How can I load the file with remote commands?
100Base-T1 compliance testing
Guideline for 100Base-T1 compliance testing using the R&S®RTO and R&S®ZND. Guideline for 100Base-T1 compliance testing using the R&S®RTO and R&S®ZND. Video, RTO2000, ZND, 100Base-T1 Guideline for 100Base-T1 compliance testing using the R&S®RTO and R&S®ZND.
Firmware for R&S®ZND Vector Network Analyzers
V1.01 V1.01 15.06.2018 324 kB R&S®ZND Release Notes V2.94 V2.94 08.05.2019 3 MB
1000BASE-T1 compliance testing - Test mode 1
Guideline for 1000BASE-T1 compliance testing using the R&S®RTO and R&S®ZND. Guideline for 1000BASE-T1 compliance testing using the R&S®RTO and R&S®ZND. Application video, oscilloscope, RTO2000, 1000Base-T1 compliance testing Guideline for 1000Base-T1 compliance testing using the R&S®RTO and R&S®ZND.
100BASE-T1 compliance testing - MDI return loss
A guide to carrying out a 100BASE-T1 compliance test for the MDI return loss using an R&S®ZND 2-port vector network analyser controlled by the ScopeSuite automation software. A guide to carrying out a 100BASE-T1 compliance test for the MDI return loss using an R&S®ZND 2-port vector network analyser controlled by the ScopeSuite automation software.
Testing insertion loss of PCB signal structures with Delta‑L 4.0
With continuously increasing data rates, signal integrity in high speed digital designs becomes more and more demanding
08-Jul-2022
Firmware for R&S®ZNXSIM simulation of VNAs
A computer simulation for the R&S®ZNA, R&S®ZNB, R&S®ZNBT and R&S®ZND that can be used to test a remote control program without the need for any VNA hardware.
ZNB - print to file command does not work anymore
ZNB - print to file command does not work anymore
Calibration of two channels simultaneously with remote commands
Calibration of two channels simultaneously with remote commands
Query the data of all traces at once
Is there a way to query the data of all traces at once?
Apply an offset to a limit line
I have an existing limit line. Is it possible to apply a vertical offset?
Store several diagrams in one file and each diagram on its own page
Store several diagrams in one file and each diagram on its own page
Export complex data of a trace with mathematics and time gating
Export complex data of a trace with mathematics and time gating.
Calibrating a vector network analyzer (VNA) with different connectors on each port
Calibrating a vector network analyzer (VNA) with different connectors on each port
Accurate Test Fixture Characterization and De-embedding
This application note provides practical hints to accurately characterize and de-embed these lead-in and lead-out structures with R&S Vector Network Analyzers ZNA, ZNB, ZNBT and ZND.
19-Sep-2022 | AN-No. 1SL367
ZNx: Marker read out of other traces with remote commands
I have several traces with markers in one channel. When I query the result of marker 1 I always get the response of trace 1. How can I get the result of marker 1 for trace 2?
Drivers for R&S®ZND Vector Network Analyzers
Each product Driver Information (3) File Description Date LabWindows/CVI, VXIpnp driver rsvna history 25.01.2023 LabVIEW driver rsvna history 25.01.2023 IVI.NET driver RsZnx history 25.01.2023 Instrument Drivers (7) Driver Name Size Version Date VXIplug&play x64 driver rsvna 5 MB 3.46.0 25.01.2023 LabWindows/CVI, Linux/OSX
Query of the x-values (frequency) of a trace
I query the values of a trace using scpi commands. But I get the y-values only. Is there a possibility to get the y-values also (frequency)?