This video series demonstrates the calibration of a four-port network analyzer and the measurement of rise time, impedance vs. distance and skew on a board with differential lines. Learn more about time domain reflectometry (TDR) and time domain transmission (TDT) for signal integrity applications using the R&S®ZVA vector network analyzer from Rohde & Schwarz. This video series demonstrates the calibration

A guide to perform cable testing based on unshielded twisted pair (UTP) for 1000BASE-T1 based on the OPEN Alliance TC9 specification. A guide to perform cable testing based on unshielded twisted pair (UTP) for 1000BASE-T1 based on the OPEN Alliance TC9 specification. This video gives an overview how to calibrate the R&S®ZND, how to perform VNA accuracy measurements, S-parametr and impedance measurements

Use your scope for conducted emission testing. Conducted emissions are electromagnetic disturbances caused by a device and conducted out by interconnects such as the power supply lines. Devices are required to pass stringent limits on the level of such emissions and these tests require expensive testing time at compliance laboratories. This video shows how the powerful spectrum analysis features in

The R&S®NGM/L/U come with a linear design, 2 or 4-quadrant operation, high readback resolution, and advanced functionalities. The R&S®NGM/L/U come with a linear design, 2 or 4-quadrant operation, high readback resolution, and advanced functionalities. R&S High Precision Power Supplies The R&S NGM/L/U come with a linear design, 2 or 4-quadrant operation, high readback resolution, and advanced functionalities

The details of the changes to the standard are explained in the video Change history in CISPR 32:2015+AMD1:2019 CSV (Consolidated version): 2nd edition was published on March 31, 2015 In Europe published as EN 55032:2015, became mandatory on May 5th, 2018 in the European Economic Area; listed in the Official Journal (November 3rd, 2020). CISPR 32 The details of the changes to the standard are explained

The R&S CMX500 radio communication tester is ideal to perform 5G NR signaling measurements for SA mode. The standalone (SA) mode is one of the main deployment scenarios for 5G NR. The fundamental difference to the non-standalone (NSA) mode is that SA does not rely on an LTE anchor for the exchange of control information between the network and the device. Instead, all signaling information is sent

Seamless integration of legacy applications Rohde & Schwarz offers a wide portfolio of gateways for a seamless integration of legacy applications into IP infrastructures. Rohde & Schwarz provides a large gateway portfolio for migration from legacy to IP. It allows radios, VCS and telephony systems to be connected to IP infrastructures by supporting a broad number of interfaces. Gateways enable central

Expert Talk Oscilloscope: I²C bus decoding Dive into your protocol to check for any problems with your I²C interface. Dive into your protocol to check for any problems with your I²C interface. Oscilloscope bus decoding, RTO2000, bus decoding, I2C Dive into your protocol to check for any problems with your I²C interface.

Discover the R&S®ZNB3044, the next-generation vector network analyzer unveiled at EuMW 2025, and learn how its advanced features deliver precise and repeatable RF & microwave testing. Discover the next generation of vector network analysis with the R&S®ZNB3044. At EuMW 2025 in Utrecht, we introduced the new analyzer and highlighted its advanced performance for RF and microwave testing. In this demo

The R&S®RTO oscilloscopes’ zone trigger lets you graphically separate events. The R&S®RTO oscilloscopes’ zone trigger lets you graphically separate events. Define up to eight zones of any shape and logically combine them over multiple channels or by using math functions. Zone trigger, time and frequency domain, RTO2000 The R&S®RTO oscilloscopes’ zone trigger lets you graphically separate events. Define

Presenter: Feng Xie, Rohde & Schwarz This video highlights latest developments in relevant EMC standards focusing on the latest news from CE Radio Equipment Directive (RED) covering ETSI EN standards for Wi-Fi, cellular technologies and EU guideline for E112 emergency service. This video highlights latest developments in relevant EMC standards focusing on the latest news from CE Radio Equipment Directive

Meet our hardware developer Simon, who realized from day one that Rohde & Schwarz is his company to work for. Meet our hardware developer Simon, who realized from day one that Rohde & Schwarz is his company to work for. hardware, development, devices, future, components, work, job, career Employee interview: Hardware developer Simon

Rohde & Schwarz presented world's first test solution for 3GPP Rel.14 NB-IoT location services at the GSMA Mobile World Congress 2018 in Barcelona. Rohde & Schwarz presented world's first test solution for 3GPP Rel.14 NB-IoT location services at the GSMA Mobile World Congress 2018 in Barcelona. MWC2018, TS-LBS, CWMcards, CMW500, LBS test, NB-IoT positioning, Rel14 positioning test, OTDOA, 3GPP, Release

EMC+SIPI debug challenge - Elizabeth McKenna EMC+SIPI debug challenge - Elizabeth McKenna

Highly accurate bearing determination in the cellular bands with the R&S®HE400CEL cellular mudule. Highly accurate bearing determination in the cellular bands with the R&S®HE400CEL cellular mudule. R&S®HE400, Antenna video Highly accurate bearing determination in the cellular bands with the R&S®HE400CEL cellular mudule.

Speaker: Tim Seyler, Product Manager Mobile Radio Tester Rohde & Schwarz This session showcases how the CMX500 enables efficient NTN network emulation with multiorbit and multiband support, integrated channel fading, and advanced tools like Constellation Insight to streamline testing and accelerate innovation in satellite communications. Explore NTN network emulation with the CMX500, an all-in-one

presented by Dr. Ernst Flemming, Rohde & Schwarz This webinar explores the topic of debugging CAN bus interfaces by using an oscilloscope. We will be talking about topics such as sources of bus errors, EMI debug correlation with protocol decode, boot cycle testing, application specific triggering, eye measurements and more. This webinar explores the topic of debugging CAN bus interfaces by using an

This video demonstrates passive antenna measurements using a Vector Network Analyzer and the AMS32 software This video demonstrates passive antenna measurements using a Vector Network Analyzer and the AMS32 software ATS1000 passive antenna measurements with VNA This video demonstrates passive antenna measurements using a Vector Network Analyzer and the AMS32 software

Learn about typical production measuerments for FR1 base station and small cell testing. Testing early FR3 or NTN R&D application is becoming a reality. In this setup we demonstrate a new option on our vector signal generator and vector signal analyzer for non-standardized 5G signal configurations. This allows to modify for example bandwidth or sub-carrier-spacing to non-standardized values using the

The R&S®RTO-B1 option offers numerous triggers for debugging and analysis, such as edge, width, pattern and serial pattern. The R&S®RTO-B1 option offers numerous triggers for debugging and analysis, such as edge, width, pattern and serial pattern. The digital channel resolution of 200 ps makes this channel a precise trigger source. RTO2000, debugging, AD converter The R&S®RTO-B1 option offers numerous

In this video application engineer Florian Ramian walks you through a standard signal channel measurement demo, using the new cross-correlation feature of the FSWX to reduce measurement uncertainty. In this video application engineer Florian Ramian walks you through a standard signal channel measurement demo, using the new cross-correlation feature of the FSWX to reduce measurement uncertainty. Florian

How to analyze the energy consumption of the activity phase of an IoT device. This video demonstrates how to analyze the energy consumption of the activity phase of an IoT device with the R&S RT-ZVC multi-channel power probe and the R&S RTO2000 oscilloscope. analyze, energy consumption, activity phase, IoT device, R&S RT-ZVC, RTO2000, oscilloscope This video demonstrates how to analyze the energy consumption

R&S®MXO 4 - See the difference All R&S®MXO 4 series oscilloscopes have the necessary hardware built into every instrument - all the user needs are the logic probes required to start using the 16 digital channels. Logic analysis enabled by default. All R&S®MXO 4 series oscilloscopes have the necessary hardware built into every instrument. All the user needs are the logic probes required to start using

Speaker: Kenichi Komatsu, Doctoral Student Researcher University of Oulu’s This talk presents a collaborative 3D Digital Twin application tested in the University of Oulu’s 5GTN network, focusing on its system design, 5G integration, XR-oriented network slicing, and validation results that demonstrate how 5G testbeds can accelerate innovation toward future 6G spatial collaboration. As 5G evolves toward

The FPL spectrum analyzer equipped with the R&S®FPL1-K7 option demodulates AM, FM and PM modulated analog signals. The R&S®FPL1-K7 is ideal for troubleshooting AM and FM transmitters, for transient and settling measurements of oscillators and for simple chirp analysis of pulsed or continuous wave signals. The FPL spectrum analyzer equipped with the R&S®FPL1-K7 option demodulates AM, FM and PM modulated

R&S®MXO 5 - Evolved for more challenges The R&S®MXO 5 series oscilloscope provides the possibility for the customer to customize their layout in order to work with a short learning curve and high productivity. The R&S®MXO 5 series oscilloscope provides the possibility for the customer to customize their layout in order to work with a short learning curve and high productivity. R&S®MXO 5 SERIES OSCILLOSCOPE

Increasing the performance of your amplifier NPR is core measurement within the satellite industry used to measure the linearity of an active component or full transmission path or channel within a satellite communication link. NPR is core measurement within the satellite industry used to measure the linearity of an active component or full transmission path or channel within a satellite communication

R&S®MXO 4 - See the difference More acquisition memory gives oscilloscopes the ability to capture more time while retaining highest sample rate and bandwidth. With 400 Mpoints acquisition memory, standard on all four channels simultaneously, the R&S®MXO 4 series oscilloscope offers the ability to capture more time intervals and zoom into the details without aliasing. More acquisition memory gives oscilloscopes

The video demonstrates how a unique test solution from Rohde & Schwarz can help to make IoT devices more secure and protect users’ privacy. The video demonstrates how a unique test solution from Rohde & Schwarz can help to make IoT devices more secure and protect users’ privacy. Follow the Rohde & Schwarz ‘Let’s talk IoT’ video series which discusses hot topics from the Internet of Things. Learn more

How to use the R&S®PR200 for spectrum monitoring and interference hunting tasks The R&S®PR200 portable receiver is able to clean the spectrum and identify, locate and eliminate interferences in an airport environment. In this video, WeiWei Tang, Product Manager for Reveivers and Direction Finders explains how the R&S®PR200 portable receiver, with 40 MHz bandwidth, is able to clean the spectrum and