Key facts
Starting at €1,030
The R&S®NGE100B DC power supply series consists of robust, high-performance, affordable instruments. They combine high efficiency with low ripple and a variety of comfort functions not usually found in this class of DC power supply.
The R&S®NGE100B is ideal for:
-R&D;
-Education
-Manufacturing tests
-Maintenance and repair
You can now easily configure the R&S®NGE100B DC power supply online. Benefit from full price transparency, the user-friendly configurator and fast purchase request processing with the authorized distribution partner of your choice. Click "Configure and quote" to start configuration.
The circuitry in each channel is completely separated from the others with no connection to chassis ground. This makes combining the channels to drive bipolar circuitries that might need +12 V/–12 V easy and eliminates any ground problems in a complex DUT.
Driving a bipolar circuit
Combine channels to drive bipolar circuitry in complex DUTs that might need +12 V and –12 V without ground problems.
Because all channels are electrically equivalent, they can be combined in serial mode for higher voltages. Up to 96 V are possible with the R&S®NGE103B, up to 64 V with the R&S®NGE102B. Channels can be bundled for higher current in parallel mode. Up to 6 A are possible when two channels are combined. Using all three of the R&S®NGE103B channels, even 9 A is possible.
Parallel and serial operation
The output channels can be combined in serial or parallel for higher voltages or currents.
For each channel, users can separately set:
Protection functions
If a limit is reached, the output channel will automatically switch off and a message will be displayed.
All operating conditions are shown clearly on the 3.5" QVGA display (320 × 240 pixel), including the output power and the status of any protective functions. Colors indicate different operating conditions:
The operating conditions are marked by colors
Constant voltage is green, constant current red, inactive channels are white and a blue background indicates a channel in setting mode.
Digital I/O
Channel 1 of the optional digital I/O interface is used as a trigger input.
Related products
