Getting Started

The purpose of this chapter is to walk you through the steps to successfully run our 'Hello World' remote control example. The example sends one command to your instrument and reads its response.
From all different operating systems and physical connections we choose the most common case: LAN connection on Windows OS. As a programming environment we take the one that is free to use – Python in PyCharm. Many of the described steps are universal and can be used in other cases as well.

Step 1: Set up LAN connection between your computer and your instrument

Objective: Working LAN connection

  • Connect your computer and your instrument to the same LAN network.
  • Use instrument’s menu to find out or adjust its IP address. Windows-based instrument IP address can be adjusted in the instrument menu or in Windows Control Panel -> Network and Sharing Center menu. For example, R&S RTO IP address menu: Setup button -> System.
  • Make sure your instrument is reachable over LAN from your computer. To verify this, use e.g. ping test:
    Use WinKey + R, type 'cmd' + ENTER to open Windows command console.
    Type 'ping <instrument_IP_address>', e.g: ping
  • Do not proceed further, unless you have the TCP-IP connection working properly.

Step 2: Establish a VISA connection to your instrument

Objective: Successfull *IDN? query with VISA Tester Tool


  • Install R&S VISA on your computer. If you use GPIB connection, you have to use the matching VISA. For example, to use NI GPIB hardware, you must use NI VISA.
  • Open R&S VISA Tester: Start->R&S VISA-> RsVisaTester.
  • To the Resource field enter 'TCPIP::<instrument_IP_address>::INSTR', e.g. 'TCPIP::'
  • Press Connect button.
  • In the Basics Tab, from the string combobox select a command *IDN?\n and press Query button.
  • See Chapter 3: VISA and VISA Tools for more details and screenshots.


  • Install NI VISA on your computer. If you use GPIB connection, you have to install NI-488.2 drivers in addition.
  • Open NI MAX, right-click on Devices and Interfaces -> Network devices and choose Create new VISA TCPI/IP Resource.
  • Select Manual entry of LAN Instrument, enter the instrument’s IP address into the field Hostname or IP address.Leave LAN Device Name field empty.
  • Use Validate button to verify if the VISA connection can be successfully established.
  • Open VISA Test Panel, select the Tab Input/Output, select the command *IDN?\n and press Query button.
  • See Chapter 3: VISA and VISA Tools for more details and screenshots.

Step 3: Install Python, PyCharm and PyVISA

Objective: Working Python installation, installed PyVISA package, working PyCharm environment.

  • Download and install Python 2.7.13 or newer (32-bit & 64-bit installer)
  • Download and install PyCharm (Professional or Community version)
  • Download Python Hello World example , extract it and open the file in PyCharm.
  • In Menu File->Settings->Project->Project Interpreter select the Python version you have downloaded.
  • Make sure you have PyVISA package installed: It has to be listed in the Project Interpreter Package list. If not, click on the green '+' button to download it. If you are behind a Proxy server, configure it in
    Menu File->Settings->Appearance->System Settings -> HTTP Proxy.
  • For offline package installation, see *Note1.

Step 4: Run the Hello World script

Objective: Obtain the instrument's reponse in the 'idn_response' variable and see the communication log.

  • In the file adjust the IP address in resourceString1 variable to to fit your instrument.
  • Start the script: Menu Run-> Run 'Python_directSCPI_Hello_World'. Your instrument responds with an identification string that is stored in the 'idn_response' variable. The script outputs the string e.g.:
    'Hello, I am Rohde&Schwarz,RTO,...' into the Python Console.
  • Open VISA Trace Tool (described in Chapter 3) and run the script again to see the log of the communication.


*Note1 - Offline installation of PyVISA package

To install PyVISA package offline:

  • Close PyCharm.
  • Download PyVISA package and a dependency package enum34
  • Create a batch file install_setup.bat with the following content:

    c:\Python27\python.exe install
  • Extract the enum34 zip package to your local folder.
  • Copy created install_setup.bat file to the same folder where the extracted enum34 file is located.
  • Execute the batch file. That starts the package installation.
  • Repeat the same procedure for the PyVISA zip package.
  • Open PyCharm and check Menu File->Settings->Project->Project Interpreter Package list again.
International Website