Demystifying 5G - Ready for testing 5G NR sub-6 GHz devices in production with the R&S CMW100

Demystifying 5G - Ready for testing 5G NR sub-6 GHz devices in production with the R&S CMW100

3GPP's 5G NR will support frequency ranges up to 52.6 GHz, but initial 5G designs will use frequencies below 6 GHz with focus on 3.5 GHz. For sub-6 GHz carrier frequencies, 3GPP currently discusses a maximum bandwidth per component carrier of 100 MHz. The R&S®CMW100 communications manufacturing test set with a supported bandwidth of 160 MHz is ready for testing initial 5G NR sub-6 GHz wireless devices in production.

The video demonstrates a typical manufacturing test case using a 5G NR-like waveform.

The demystifying 5G video series discusses main topics related to 5G including requirements, timeline, potential frequency and waveform candidates.

Related solutions

Wireless communications

Wireless communications

5G & cellular

Related videos

Video: 5G mm-wave channel sounding at 39 GHz

5G mm-wave channel sounding at 39 GHz

The R&S®FSW signal and spectrum analyzer downconverts the received signal and provides digitized I/Q samples to an external software tool to calculate channel impulse response and channel transfer function.

Demystifying 5G – Where 5G waveform candidates lose their advantage

Waveforms 5G

Demystifying 5G – Where 5G waveform candidates lose their advantage

5G waveform candidates, such as FBMC, UFMC and GFDM, are designed to overcome limitations of LTE. For example, FBMC, UFMC and GFDM outperform LTE in spectral regrowth. Their much sharper power spectrum is a clear advantage over LTE. But what happens, if a non-linear device such as a power amplifier is used to amplify the signal? This video explores this behavior and provides interesting results.

Demystifying 5G – 5G waveform defined by Verizon Wireless

Demystifying 5G – 5G waveform defined by Verizon Wireless

How to configure a waveform that follows the Verizon Wireless 5G specification is the topic of this video. The focus is on downlink and synchronization signals, broadcast channels and beamforming reference signals.

Demystifying 5G – 3GPP RAN1 status for 5G New Radio (NR)

Demystifying 5G – 3GPP RAN1 status for 5G New Radio (NR)

This video shows the current status of 5G New Radio (NR) in 3GPP with focus on RAN1 – the group within 3GPP that is responsible for physical layer aspects.

Demystifying 5G – 5G New Radio (NR) waveform generation

Demystifying 5G – 5G New Radio (NR) waveform generation

In this example the 5G waveform uses one of the physical layer parameterization currently discussed in 3GPP RAN1.

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Mr.

Ms.

No information

First name

Last name

E-mail

Company

Country

Phone (e.g. +1 400 123 5678)

Zip

City

Inquiry

Email confirmation (optional)

Your request has been sent successfully. We will contact you shortly.

An error is occurred, please try it again later.