R&S®ZN-Z5x automatic calibration units

Models up to 50 GHz,  with 2 and 4 ports, configurable ports

R&S®ZN-Z5x automatic calibration units
Open Lightbox
R&S®ZN-Z5x automatic calibration units
Open Lightbox
R&S®ZN-Z5x automatic calibration units
Open Lightbox
R&S®ZN-Z5x automatic calibration units
Open Lightbox
R&S®ZN-Z5x automatic calibration units, 3D R&S®ZN-Z5x automatic calibration units, Side view R&S®ZN-Z5x automatic calibration units, Side view R&S®ZN-Z5x automatic calibration units, Side view

Key facts

  • Wide frequency range 9 kHz to 50 GHz
  • Virtually no warm-up time required
  • Auto-detection and USB control
  • Multiport calibration supported

High-end automatic VNA calibration units

Covering 8.5 GHz to 50 GHz, 2 and 4 ports, configurable

The models cover the frequency range from 9 kHz to 50 GHz, with type N, 3.5 mm, 2.92 mm and 2.4 mm connectors depending on the frequency range. They are available with 2 or 4 ports. With re-connection, also multiport calibration of R&S®ZNBT, R&S®ZNB and switch matrix systems is supported. The R&S®ZN-Z51 ranges up to 8.5 GHz and enables each port to be configured individually: the standard versions are 3.5 mm(f) and type N(f) ports, but each port can be ordered individually as 3.5 mm (f or m), N (f or m), 7/16 (f or m) or 4.3-10.

Features & benefits

Wide frequency range

Covering a total of 9 kHz to 50 GHz

The frequency range of the ZN-Z5x automatic calibration units supports the main frequency ranges of the Rohde & Schwarz network analyzers. The high frequency models offer lower frequencies of 100 kHz and 9 kHz to cover a broad range of applications.

Configurable test port types

Support of mixed connector systems

Each port on the 8.5 GHz ZN-Z51 models (2 port *.72 and 4 port *.74) can be individually configured. Each port can be permanently changed to N(m), 3.5 mm (m,f), 7/16 (m,f), 4.3-10 (f) (see options).

Auto configuration and detection

Plug and play calibration

The ZN-Z5x calibration units are detected automatically via the USB connection. All required data is transferred to the VNA. When starting the calibration, the port assignment can be found with a keystroke. The calibration can be launched with minimum effort, time and highest reliability.

Available models

Available models
Models
Type
Frequency range
Connector type
Number of ports
Description

R&S®ZN-Z50

Order number 1335.6904.30

Type
Calibration unit 50 Ohms
Frequency range
9 kHz to 9 GHz
Connector type
3.5 mm (f)
Number of ports
2 ports
Description
for R&S®ZVA/T, ZNB/T, ZNC, ZND, ZNL

R&S®ZN-Z50

Order number 1335.6904.32

Type
Calibration unit 50 Ohms
Frequency range
9 kHz to 26.5 GHz
Connector type
3.5 mm (f)
Number of ports
2 ports
Description
for R&S®ZVA/T, ZNB/T, ZNC, ZND, ZNL

R&S®ZN-Z51

Order number 1319.5507.32

Type
Calibration unit
Frequency range
100 kHz to 8.5 GHz
Connector type
3.5 mm(f)
Number of ports
2 ports
Description
-

R&S®ZN-Z51

Order number 1319.5507.34

Type
Calibration unit
Frequency range
100 kHz to 8.5 GHz
Connector type
3.5 mm(f)
Number of ports
4 ports
Description
-

R&S®ZN-Z51

Order number 1319.5507.72

Type
Calibration unit
Frequency range
100 kHz to 8.5 GHz
Connector type
N(f)
Number of ports
2 ports
Description
It is possible to individually configure each port of this Calibration Unit. Each Port can be permanently adapted N(m), 3.5mm (m,f), 7/16 (m,f), 4.3-10 (f).

R&S®ZN-Z51

Order number 1319.5507.74

Type
Calibration unit
Frequency range
100 kHz to 8.5 GHz
Connector type
N(f)
Number of ports
4 ports
Description
It is possible to individually configure each port of this Calibration Unit. Each Port can be permanently adapted N(m), 3.5mm (m,f), 7/16 (m,f), 4.3-10 (f).

R&S®ZN-Z52

Order number 1335.6991.30

Type
Calibration unit 50 Ohms
Frequency range
100 kHz to 26.5 GHz
Connector type
3.5 mm (f)
Number of ports
4 ports
Description
for R&S®ZVA/T, ZNB/T, ZNC, ZND, ZNL

R&S®ZN-Z53

Order number 1335.7046.32

Type
Calibration unit 50 Ohms
Frequency range
100 kHz to 26.5 GHz
Connector type
3.5 mm (f)
Number of ports
2 ports
Description
for R&S®ZVA/T, ZNB/T, ZNC, ZND, ZNL

R&S®ZN-Z53

Order number 1335.7046.72

Type
Calibration unit 50 Ohms
Frequency range
100 kHz to 18 GHz
Connector type
N (f)
Number of ports
2 ports
Description
for R&S®ZVA/T, ZNB/T, ZNC, ZND, ZNL

R&S®ZN-Z54

Order number 1335.7117.92

Type
Calibration unit 50 Ohms
Frequency range
9 kHz to 40 GHz
Connector type
2.92 mm (f)
Number of ports
2 ports
Description
for R&S®ZVA/T, ZNB/T, ZNC, ZND, ZNL

R&S®ZN-Z55

Order number 1335.7181.42

Type
Calibration unit 50 Ohms
Frequency range
9 kHz to 50 GHz
Connector type
2.4 mm (f)
Number of ports
2 ports
Description
for R&S®ZVA/T, ZNB/T, ZNC, ZND, ZNL

Available options

General
Product
Description
R&S®ZNZ51-B130

Order number 1319.5720.11

Description

Calibration Unit

GT ZNZ51-B130 CONNECTOR PORT1 3.5MM(F)

R&S®ZNZ51-B131

Order number 1319.5736.11

Description

Calibration Unit

GT ZNZ51-B131 CONNECTOR PORT1 3.5MM(M)

R&S®ZNZ51-B140

Order number 1319.5871.11

Description

Calibration Unit

GT ZNZ51-B140 CONNECTOR P1 4.3-10 (F)

R&S®ZNZ51-B160

Order number 1319.5742.11

Description

Calibration Unit

GT ZNZ51-B160 CONNECTOR PORT1 7/16(F)

R&S®ZNZ51-B161

Order number 1319.5759.11

Description

Calibration Unit

GT ZNZ51-B161 CONNECTOR PORT1 7/16(M)

R&S®ZNZ51-B171

Order number 1319.5713.11

Description

Calibration Unit

GT ZNZ51-B171 CONNECTOR PORT1 N(M)

R&S®ZNZ51-B230

Order number 1319.5720.12

Description

Calibration Unit

GT ZNZ51-B230 CONNECTOR PORT2 3.5MM(F)

R&S®ZNZ51-B231

Order number 1319.5736.12

Description

Calibration Unit

GT ZNZ51-B231 CONNECTOR PORT2 3.5MM(M)

R&S®ZNZ51-B240

Order number 1319.5871.12

Description

Calibration Unit

GT ZNZ51-B240 CONNECTOR P2 4.3-10 (F)

R&S®ZNZ51-B260

Order number 1319.5742.12

Description

Calibration Unit

GT ZNZ51-B260 CONNECTOR PORT2 7/16(F)

R&S®ZNZ51-B261

Order number 1319.5759.12

Description

Calibration Unit

GT ZNZ51-B261 CONNECTOR PORT2 7/16(M)

R&S®ZNZ51-B271

Order number 1319.5713.12

Description

Calibration Unit

GT ZNZ51-B271 CONNECTOR PORT2 N(M)

R&S®ZNZ51-B330

Order number 1319.5720.13

Description

Calibration Unit

GT ZNZ51-B330 CONNECTOR PORT3 3.5MM(F)

R&S®ZNZ51-B331

Order number 1319.5736.13

Description

Calibration Unit

GT ZNZ51-B331 CONNECTOR PORT3 3.5MM(M)

R&S®ZNZ51-B340

Order number 1319.5871.13

Description

Calibration Unit

GT ZNZ51-B340 CONNECTOR P3 4.3-10 (F)

R&S®ZNZ51-B360

Order number 1319.5742.13

Description

Calibration Unit

GT ZNZ51-B360 CONNECTOR PORT3 7/16(F)

R&S®ZNZ51-B361

Order number 1319.5759.13

Description

Calibration Unit

GT ZNZ51-B361 CONNECTOR PORT3 7/16(M)

R&S®ZNZ51-B371

Order number 1319.5713.13

Description

Calibration Unit

GT ZNZ51-B371 CONNECTOR PORT3 N(M)

R&S®ZNZ51-B430

Order number 1319.5720.14

Description

Calibration Unit

GT ZNZ51-B430 CONNECTOR PORT4 3.5MM(F)

R&S®ZNZ51-B431

Order number 1319.5736.14

Description

Calibration Unit

GT ZNZ51-B431 CONNECTOR PORT4 3.5MM(M)

R&S®ZNZ51-B440

Order number 1319.5871.14

Description

Calibration Unit

GT ZNZ51-B440 CONNECTOR P4 4.3-10 (F)

R&S®ZNZ51-B460

Order number 1319.5742.14

Description

Calibration Unit

GT ZNZ51-B460 CONNECTOR PORT4 7/16(F)

R&S®ZNZ51-B461

Order number 1319.5759.14

Description

Calibration Unit

GT ZNZ51-B461 CONNECTOR PORT4 7/16(M)

R&S®ZNZ51-B471

Order number 1319.5713.14

Description

Calibration Unit

GT ZNZ51-B471 CONNECTOR PORT4 N(M)

Network analyzer portfolio

Network analyzer

More information

Extensions

More information

Accessories

More information

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

I want to receive information from Rohde & Schwarz via

Marketing permission

What does this mean in detail?

I agree that Rohde & Schwarz GmbH & Co. KG and the Rohde & Schwarz entity or subsidiary company mentioned in the imprint of this website, may contact me via the chosen channel (email or postal mail) for marketing and advertising purposes (e.g. information on special offers and discount promotions) related to, but not limited to, products and solutions in the fields of test and measurement, secure communications, monitoring and network testing, broadcast and media, and cybersecurity.

Your rights

This declaration of consent may be withdrawn at any time by sending an email with the subject "Unsubscribe" to news@rohde-schwarz.com. Additionally, a link to unsubscribe from future email advertisements is contained in each email sent. Further details on the use of personal data and the withdrawal procedure are set out in the Statement of Privacy.

Your request has been sent successfully. We will contact you shortly.
An error is occurred, please try it again later.
General and legal information

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

Terms & Conditions of the Prize Draw 10 years Rohde & Schwarz oscilloscopes

1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).

2. All participators can register to the draw during January 01, 2020 to December 31, 2020 with their name, company name and business e-mail.

3. Participation is free of charge and not dependent on the purchase of goods or services.

4. The draw is only open to legal entities and only the legal entities are able to win the prizes. An individual person is not allowed to participate on its own name and its own account but as a representative of a legal entity filing the participation form in the name of and on behalf of the legal entity.

5. The prizes to win are 1 of 10 R&S®RTB2000 within the time frame January 1, 2020 to December 31, 2020:

Prize: 1x R&S®RTB2000 Digital Oscilloscope

6. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich. The winner of the prizes will be informed by e-mail within 5 (5) working days.

7. The authorized representative of the legal entity shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.

8. R&S’ employees and members of their families and also person being familiar with the process of the draw and members of their families are excluded from filling the participation form.

9. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.

10. Personal data will be processed only for the purpose of this prize draw and deleted four (4) weeks after the draw, if not agreed otherwise.

11. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Competition. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn.

12. The participants cannot claim the prizes of this draw and no legal recourse is permitted in this respect.

13. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Competition.