The R&S®VTC/VTE/VTS video testers are used for testing video and audio interfaces on consumer electronics equipment.Features & Benefits Mobile high-definition link (MHL) interface testing High-definition multimedia interface (HDMI) testing Analog audio/video interface testingFeatures & BenefitsRealtime protocol analysisControl bus (CBUS) testingGeneration of user-defined patterns and patterns in line

/VTE/VTS. ● New format: UHDTV (also with YCbCr 4:2:0) (CR 4881).

for firmware update in the document VTC-VTE-VTS_ReleaseNotes_2.20.0.1.pdf V 2.20.0.1 11.08.2020687 MB R&S®VTC-VTE-VTS Firmware Release Notes V 2.20.0.1 11.08.2020 753 kB R&S®VTC/VTE/VTS Open Source Acknowledgment 0318.11.2015775 kB HDMI CTS Sink Test Library Manual 0326.04.201677 kB R&S®VTC-VTE-VTS Firmware Release Notes V 2.20.0.111.08.2020753 kB

File DescriptionDateRelated Content 02.10.2020 LabWindows/CVI, VXIpnp driver rsavpxxx history 19.05.2015 LabVIEW driver rsavpxxx history 27.05.2015 Driver NameSizeVersionDateVXIplug&play x86 driver rsavp 5 MB1.1.0 27.06.2018 LabWindows/CVI, Linux/OSX driver rsavp 2 MB1.1.0 27.06.2018 VXIplug&play x64 driver rsavp 5 MB1.1.0 27.06.2018 LabVIEW 2010 driver rsavp 22 MB1.1.0 27.06.2018 Remote – control

For A/V devices such as smartphones, tablet PCs, Blu-ray players, set-top boxes and TV sets, the perceived video quality must satisfy very high standards. A/V devices need to hold their own in three main areas:ı Stability (environmental influences, response to source signal disturbances, etc.)ı Performance (switching times, delays)ı Compliance with standards (input and output formats)Any deviations from the expected video and audio output can be automatically and precisely detected with R&S A/V distortion analysis on all common analog and digital interfaces such as HDMI™ and MHL™.This document examines the relevant setups and configurations.

15-Oct-2014 | AN-No. 7BM87

This application note describes the configuration of a Miracast wireless video transmission system and how to measure the delay times between a smart phone or tablet (source) and a television / monitor (sink) display. The accompanying software for Windows 7/8/10, Mac OS X 10.x and MATLAB additionally allows to measure the delay until the video signal is transmitted over the air and optionally until it is available on the HDMI cable of an external Miracast receiver.

01-Oct-2015 | AN-No. 1MA250

Despite the now standard digital distribution of video signals, analog video signals are still an integral part of AV terminals in the home. This application note covers the fundamentals of analog component signals and shows how the signal quality can be measured with the measuring equipment from Rohde & Schwarz.

28-May-2015 | AN-No. 7MH107

English (PD 5213.7202.12)

A/V interface testing of consumer electronics

The MHL standard specifies the transmission of high-definition audio and video data on five individual lines, as well as the exchange of bidirectional control information and the supply of power from the sink to the source. Over 200 million portable CE devices - such as mobile phones, tablet PCs and cameras - already use this interface to present content onto larger screens. To ensure functionality and interoperability, every new MHL-capable device must, before entering the market, undergo thorough tests at an authorized test center (ATC) in line with the compliance test specification (CTS) issued by the MHL Consortium. This application note provides an overview of the MHL technology and also describes the Rohde & Schwarz compliance test solution for the system part of the current MHL2.0 standard version.

14-May-2013 | AN-No. 7BM83

Versatile Software Tool for Rohde & Schwarz Instruments RSCommander is a versatile software tool for a wide range of Rohde & Schwarz spectrum-, network analyzers, signal generators and oscilloscopes. It allows for automatic instrument discovery, making screenshots, reading traces, file transfer and simple script creation.

24-Dec-2017 | AN-No. 1MA074

Broadcasting transmitters are subject to particularly stringent standards with respect to broadcast signal quality, because even small faults can lead to service disruptions for many viewers. A single instrument, the R&S®ETL TV analyzer, performs all required ISDB-T transmitter measurements, from the initial acceptance testing for the transmitter, to measurements performed during commissioning and preventive maintenance.

13-May-2013 | AN-No. 7BM103

Eye Measurements on HDMI signals Brochures and Data Sheets White Paper Eye measurements on HDMI signals with the R&S VT-B2380 TMDS time domain analyzer The high-definition multimedia interface (HDMI) standard is the leading standard for the transmission of uncompressed video data within the home. To ensure that all devices using this interface work together seamlessly, the HDMI Forum has defined and

When installed on an Apple iPad*, a remote desktop app provides a convenient way to remotely control measuring instruments over a WLAN connection.This is especially helpful when using measuring instruments that do not have their own display such as the R&S®VTS or R&S®SFC.The remote desktop app also gives users a detached way to control the instrument if, for example, the actual measuring instrument is installed in a place that is difficult to access.* Apple and iPad are trademarks of Apple Inc.

02-Oct-2012 | AN-No. 7BM82

Provides the information required to prepare the instrument for use and start working. Basic operations and handling are described.

Provides the information required to prepare the instrument for use and start working. Basic operations and handling are described.

Describes all instrument functions and remote control commands. Includes the contents of the getting started manual.

Describes all instrument functions and remote control commands. Includes the contents of the getting started manual.

R&S AVBrun Conformance testing solution for MHL/HDMI CTS sink/source

14-Sep-2015

Automotive Infotainment Testing

21-Feb-2018

The R&S®VTC/VTE video testers analyze and evaluate the quality of set-top boxes and TVs on the DUT’s A/V interfaces from a user perspective. They provide the necessary quality tests from Go/NoGo tests to long-term stability tests. The RF input signals required for the DUT are generated by the R&S®VTC/VTE.

04-Feb-2014

Automotive Infotainment Testing

24-Apr-2018

A/V interface testing of consumer electronics

Describes all instrument functions and remote control commands. Includes the contents of the getting started manual.

English (PD 3606.6792.82)

The Rohde & Schwarz R&S®VTC and R&S®VTE video testers assess audio/video signals from the user's perspective (application testing). They are used to evaluate signal quality and to identify faults reliably. The tests are based on a difference analysis between the audio/video signal being tested and a reference signal. The required synchronization can be achieved by using a unique identifier, called a time code. This time code is inserted using the R&S®Time Code Inserter software described in this application note. This application note describes how time codes work and how to add a time code to any A/V file.

16-Apr-2013 | AN-No. 7BM84

The high-definition multimedia interface (HDMI™) is used to transmit audio and video data. HDMI has become the standard for a variety of consumer electronic products, such as Blu-ray™ players, A/V receivers, set-top box, TV monitors and digital video/ still cameras. The HDMI interface measurements needed for these products require specialized T&M equipment. This equipment is not only needed for certification, but is also used for a variety of tests during development, for quality assurance and for end-of-line production testing. The R&S®VTC, R&S®VTE and R&S®VTS video testers from Rohde & Schwarz make it possible to test A/V interfaces such as HDMI easily, reliably and cost efficiently. This application note focuses on functional testing and debugging of HDMI interfaces using the R&S®VTC/VTE/VTS. It explains how these instruments can be used to assess the HDCP implementation, the ARC or the CEC functionality.

04-Jun-2014 | AN-No. 7BM85

The R&S®BTC broadcast test center generates DVB-C2 signals for receiver tests with a variety of simulated interference types. The selection tests stipulated by the DVB Project require a cable TV network with full channel load. Combining the R&S®BTC broadcast test center and the R&S®CLG cable load generator makes it quick and easy to create a flexible cable TV network with full channel load and to simulate all types of realistic interference, permitting tests in accordance with DVB.

30-Jul-2013 | AN-No. 7BM88

R&S ® TA-TRS is a sequencer test software that further enhances seamless RF test experience for broadcast receivers based on ETSI EN 303 340, EN 303 345 and EN 303 372-2

The R&S DVSG digital video signal generator supports the development and quality assurance of latest-generation TV sets and projectors. It is a costefficient, one-box solution that generates the audio and video signals required for these tasks.