7927 Results
The Hameg Value Service is an extra service proviede free of charge by Hameg Instruments GmbH.
List of HAMEG Products with 3 years warranty exention
Useful tips and tricks for your first measurement experience
Resistors, capacitors and inductors are the most basic components in electric circuits. It must be ensured that they work properly and accurately. Therefore, they need to be tested thoroughly during circuit design. This is usually done using LCR meters, which have become indispensable in the lab and in production. This application note looks at how to perform basic capacitor and inductor measurements accurately and reliably.
22-Feb-2024 | AN-No. 1GP142
This application note provides an application program for the audio analyzer R&S®UPV which calculates and displays the loudness of non-stationary sounds according to ISO 532-1 (Zwicker method).
14-Dec-2017 | AN-No. 1GA67
Batteries are used in a variety of applications, and their quality can be affected by cycling. This tool provides an easy way to determine battery performance over time.
17-Dec-2021 | AN-No. 1GP130
Calculation tool to determine the measurement accuracy of LCX100 and LCX200.
11-May-2023 | AN-No. 1GP138
This application note is about creating your own battery model for the R&S®NGM200 or R&S®NGU201, beyond the standard models provided within the battery simulation option NGM-K106.
26-Jul-2023 | AN-No. 1GP128
The LCR meters R&S®LCX100 and R&S®LCX200 precisely measure the complex impedance and the resulting components values over a wide frequency range.
14-Mar-2022 | AN-No. 1GP132
This application note provides an application program and instructions for performing speech quality tests and delay measurements in a live network, using the R&S®UPV audio analyzer.
14-Dec-2017 | AN-No. 1GA68
Logging and charting tool for DC power supplies.
14-Nov-2019 | AN-No. 1GP122
Using R&S audio analyzers in remote control applications to replace the Agilent 8903B
24-Nov-2010 | AN-No. 1GA54
This application note explains the basics behind these properties and offers an application program for their measurement.
10-Jul-2012 | AN-No. 1GA61
Recording Measurement Results over Time with Audio Analyzer R&S<sup>®</sup> UPV
29-Jun-2012 | AN-No. 1GA59
This application note describes how to connect and configure DC power supplies R&S®NGL200 and R&S®NGM200 for synchronized on and off switching of all channels across multiple power supplies.
15-Jun-2020 | AN-No. 1GP126
This application note proposes a digital level shifter for connecting the I2S interfaces R&S®UPP-B2 and R&S®UPV-B41 to devices under test with a logic voltage different from 3.3 V.
27-Mar-2020 | AN-No. 1GA71
Harmonic Distortion Measurements in the Presence of Noise
06-Jul-2011 | AN-No. 1GA55
Simple Sequencing Tool for SCPI Commands
19-Jul-2010 | AN-No. 1GA53
This paper reviews the classical spectrum analyzer measurement of L(f) and its shortcomings and discusses how modern phase noise test sets measure phase noise and avoid the limitations imposed by direct spectrum measurements.
31-Mar-2020
Swept Harmonic Distortion Measurements
16-Jul-2011 | AN-No. 1GA56
Using Application Programs for Audio Analyzer R&S<sup>®</sup> UPV in Remote Control
30-Jun-2012 | AN-No. 1GA60
Printing Tool for Audio Analyzer R&S UPV
18-Jul-2011 | AN-No. 1GA57
Measurement of Play-only devices like MP3 Players with R&S Audio Analyzer UPV
28-Jun-2007 | AN-No. 1GA46
The ARB Toolbox is an easy-to-use, feature packed software package that is used for many ARB waveform related tasks.
13-Dec-2018 | AN-No. 1GP88
application program for battery model generation from discharge data
21-Nov-2022 | AN-No. 1GP136
This application note applies to DC power supplies R&S®NGL200, R&S®NGM200, R&S®NGP800, R&S®NGU201 and R&S®NGU401, as well as LCR meters R&S®LCX100 and R&S®LCX200.
19-May-2022 | AN-No. 1GP135
This application note presents setting examples for all basic audio measurements to be performed immediately, using the R&S®UPP and R&S®UPV audio analyzers. For each setup, information is given on the type of measurement, the underlying standards, and on how to modify the graphic display results.
07-Jul-2014 | AN-No. 1GA64
The instrument setup provided in this application note allows to analyze a degraded speech signal stored into a wave file and to display its FFT spectrum and waveform.
05-Sep-2014 | AN-No. 1GA66
This application note provides a tool which generates a voltage or current sweep using the arbitrary function of the instruments. A fast log captures voltage and current values during the sweep.
15-Feb-2021 | AN-No. 1GP129