WLAN 802.11ax AP and station testing under realistic operation conditions

WLAN 802.11ax AP and station testing under realistic operation conditions

Rohde & Schwarz presents an IEEE 802.11ax test solution for WLAN access points and stations in multi-user operation (OFDMA). The tried and tested R&S®CMW270 Wireless Connectivity Tester can be used to test the RF characteristics of receivers and transmitters, and to determine the data throughput in the transmit and receive directions. The R&S®CMW270 is the reference system for testing IEEE 802.11ax devices under realistic operation conditions.

Related videos

5G NR signaling testing for FR2 in NSA mode presented by Rohde & Schwarz

5G NSA signaling testing for FR2

For developers of 5G devices, Rohde & Schwarz features the R&S®CMX500 radio communication tester that enables non-standalone (NSA) and standalone (SA) signaling tests in both FR1 and FR2 frequency ranges.

Compact and flexible CATR system for 5G FR2 testing presented by Rohde & Schwarz

Compact and flexible CATR system for 5G FR2 testing

Rohde & Schwarz presents the most compact CATR solution R&S®ATS1800C. The system allows to test heavier mmWave devices in a big quiet zone yet on a small chamber footprint.

Most compact 5G conformance test system for mmWave (FR2) presented by Rohde & Schwarz

Most compact 5G conformance test system for mmWave (FR2)

Rohde & Schwarz presents its innovative 5G conformance test solution for both FR1 and FR2. The latest version of the popular R&S®TS8980 RF test system now covers 5G NR.

Frequency range 2 (FR2) OTA testing

Compact CATR OTA chamber for 5G FR2 testing

Signaling test in the new mmWave-based 5G frequency of FR2 requires an OTA test setup. The R&S®ATS800R CATR rack based antenna test system is designed for FR2 over-the-air measurements in R&D.

Turnkey RF test solution for 5G FR2 devices

Turnkey RF test solution for 5G FR2 devices

High-volume testing in the mmWave frequency range (FR2) requires an over-the-air environment. The R&S®CMPQ test solution provides accurate and reliable measurement results under radiated conditions for 5G NR non-signaling tests in FR2.

5G NSA signaling testing with dynamic spectrum sharing

5G NSA signaling testing with dynamic spectrum sharing

The verified test solutions from Rohde & Schwarz, based on the R&S®CMX500 and R&S®CMW500 radio communication testers and the R&S®CMsquares unified test software, simplifies signaling testing with DSS in non-standalone (NSA) mode.

5G multichannel MIMO testing for FR1

5G multichannel MIMO testing for FR1

Rohde & Schwarz presents cross-channel measurements up to 4x4 MIMO on 5G transmissions in the FR1 range for the development and verification of 5G base stations and small cells.

High performance RF testing for 5G BTS production

High performance RF testing for 5G BTS production

Rohde & Schwarz Server-Based Testing (SBT) supports customers in accelerating their measurement tasks in automated production and component characterisation environments.

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Mr.

Ms.

No information

First name

Last name

E-mail

Company

Country

Phone (e.g. +1 400 123 5678)

Zip

City

Inquiry

Email confirmation (optional)

Your request has been sent successfully. We will contact you shortly.

An error is occurred, please try it again later.