Rohde & Schwarz at MWC 2019 – Videos

5G as a full systerm provide (Solution for regulatory authorities)

At MWC 2025, we showcased our enhanced 5G monitoring and testing portfolio. Rohde and Schwarz is the first full system provider for license compliance, interference hunting and coverage measurements for 5G mobile networks

Time Domain Analysis for ESMW

The ESMW ultra wideband monitoring receiver is the core component of our future-proof spectrum monitoring systems for fixed, mobile and transportable stations. Here, at MWC2025, we are launching the much expected time domain analysis functionality for the ESMW with gated measurements, which is crucial for license compliance and interference hunting in 5G networks.

AI-powered network visibility

Discover AI-powered deep packet inspection in action! How does AI-driven encrypted traffic intelligence (ETI) enhance transparency in large-scale telecom networks? Watch Anna Vilshöfer break it down and see how our next-gen DPI is shaping intelligent networks

Network energy saving testing

In this demo, Rohde & Schwarz and VIAVI Solutions in collaboration with Analog Devices are showcasing how advanced energy saving features on an O-RU platform save energy under real-world traffic loads.

ML-based CSI-RS feedback enhancements

This demo showcases an industry-first implementation of ML-based CSI-RS feedback, achieved in partnership with Qualcomm Technologies.

FR3 device testing

Discover the feasibility of FR3 using the CMX500 OBT in a maximum throughput use case at a 13GHz based on Qualcomm Technologies’ 5G mobile test platform.

Physical layer testing for base stations

Learn about typical production measuerments for FR1 base station and small cell testing.

Customized 5G signals for FR3 and NTN testing

Learn about typical production measuerments for FR1 base station and small cell testing.

NR-NTN conformance testing

This demo showcases first 5G test cases in FR1 where the CMX500 one-box-tester (OBT) is connected to the DUT to simulate specified test scenarios integrating base stations and satellites.

AI-powered scripting

Discover how our AI-based scripting assistant on the CMX500 one-box signaling tester revolutionizes mobile phone testing in this demo.

AR antenna measurements

This demo showcases AR in the context of OTA testing by visualizing an antenna pattern over a DUT inside the R&S®ATS800R chamber, enabling control of a positioner via hand gestures.

NR-NTN testing - connectivity redefined

Discover our new tool Constellation Insight, which, when paired with the CMX500 one-box tester, simplifies the configuration and deployment of non-terrestrial networks.

Towards 6G: Digital Twins for AI-RAN

In this demo, we collaborated with NVIDIA to showcase how ray tracing can be utilized to create realistic radio propagation environment conditions and how to transfer the generated wireless channel data for reproduction in lab testing.

Benefits of private 5G networks in industry – case study steel manufacturing

The case study shows the advantages of private 5G networks for a customer in steel manufacturing and is the foundation for digital transformation.

First responders' lifeline: How to verify and optimize MCX network performance

The presentation highlights MCX performance testing using Rohde & Schwarz's methods to ensure safe broadband migration and protect first responders by identifying network issues early.

Integrated sensing and communication (ISAC) from 5G-advanced to 6G

This presentation covers the status of ISAC in 6G, 3GPP Release 19 developments, and Rohde & Schwarz test solutions.

NB-NTN module application from module supplier perspective (IoT/Automotive)

This talk is about Murata showcases advancements in NB-NTN modules and future wireless connectivity, exploring applications and trends in licensed and unlicensed bands.

Network benchmarking techniques – behind the scenes

The presentation explores the complexities of benchmarking campaigns, from test design to automation in dynamic networks.

5G network benchmark beyond the numbers

This presentation examines 5G performance beyond benchmarks, focusing on indoor propagation and altitude impacts on coverage, capacity, and user experience.

The elephant in the room called Wi-Fi

This presentation explores the need for seamless Wi-Fi and 5G interworking, covering approaches like Hotspot 2.0, AT3S, and related testing and certification.

Cellular IoT evolution from 2G to 6G

This talk highlights the 2G-5G transition and key cellular IoT technologies with challenges and recommendations.

Radio protocol emergence

This talk explores the potential for accelerating and optimizing the traditional RAN protocol standardization process using an ML-based framework that enables independent radio nodes to autonomously develop performance-driven communication protocols.

The future of wireless with 6G

This talk explores 6G advancements, including AI, 3D networking, RIS, XR, security, and research shaping future deployment.

Navigating the 5G evolution by connecting industrial IoT with Modern Supply Chain

This talk is a demonstration of how private 5G is building the connectivity bridge, between Modern Supply Chain requirements and the real-time industrial IoT applications to feed those.

Essential performance learnings from private and public 5G networks

This talk addresses synchronizing private and public networks, optimizing coexistence, and troubleshooting with advanced layer 1-3 insights.

Business critical Campus Networks, the operator perspective

This talk explores the role of 5G Campus Networks in accelerating digitalization through tailored architectures and advanced monitoring solutions to meet business-critical application demands and stringent SLA requirements.

RF wireless power transfer testing

The presentation explores RF WPT for IoT devices, highlighting efficiency gains via waveform shaping and AirFuel Alliance standards.

Self-powered wireless sensors for the IoT

The presentation explores self-powered wireless IoT sensors using energy harvesting, highlighting implementations, performance, and use cases for optimized industrial processes.

Achieving the first conformance certification for the Frequentis MCX Client Platform

This presentation highlights Frequentis's milestone as the first to achieve MCX Client Platform certification.

RAN energy efficiency journey

The presentation will guide the audience on a journey into the different dimensions through which energy efficiency can be achieved in a radio access network.

Energy efficiency in telco networks

This talk addresses the energy consumption trends of telecommunication networks in Germany, highlighting the increasing role of wireless technologies, the need for a life-cycle assessment of emissions, and more.

NES in 3GPP – a technology overview

This talk covers 5G Advanced Network Energy Savings (NES) progress, challenges, and future evolution in 3GPP standards.

Demystifying lab testing of NR-NTN devices

The talk highlights the integration of satellite and terrestrial networks, enabling initial services while requiring further research.

GCF MCX Certification – a key step in enabling end to end mission critical services over mobile broadband

The talk highlights MCX standards, certification, and measures to ensure reliable Mobile Broadband for public safety.

A network operator’s view on current NTN possibilities and areas for future research

The talk highlights the integration of satellite and terrestrial networks, enabling initial services while requiring further research.

NTN developments at ESA

This session highlights how to support developments, experimentation and further standardisation of the satellite component in 3GPP.

Pioneering 4G/5G connectivity from space: Opportunities, challenges & solutions

The presentation discusses leveraging satellite technology to enable 4G/5G connectivity, addressing opportunities, challenges, and innovative solutions.

MTSK2024 - Mobile Test Summit Korea 2024 Welcome & Opening

Mobile Test Summit Korea 2024 Welcome & Opening

MTSK2024 - 6G forum view on IMT-2030 Use Cases

6G forum view on IMT-2030 Use Cases

MTSK2024 - 6G research areas from T&M perspective

6G research areas from T&M perspective

MTSK2024 - NTN Architectures and technologies

NTN Architectures and technologies

MTSK2024 - Wi-Fi technologies and solution

Wi-Fi technologies and solution

Impressions - MNT Forum 2023

Impressions from Mobile Network Testing Forum 2023 at the Rohde & Schwarz headquarter in Munich.

Air Space World 2023 Customer Voice Skyguide

Conformance test for O-RAN fronthaul from Rohde & Schwarz, VIAVI Solutions, and Analog Devices

Watch a demonstration of O-RAN radio unit conformance test. Using a test setup from Rohde & Schwarz and VIAVI Solutions run tests conforming to O-RAN ALLIANCE specifications on an Analog Devices 8T8R radio reference platform.

Network engineering and troubleshooting

With this demo we present our MNT solutions for UE and network engineering, troubleshooting and Open RAN testing.

Ultra wideband performance testing over the air for R&D

Watch our experts at MWC 2023 to learn about fully automated test solutions that help to quickly test and compare various device designs in order to achieve the most accurate UWB localization.

Towards 6G: AI/ML-based neural receiver

The wireless industry anticipates that a future 6G standard supports an Artificial Intelligence / Machine Learning (AI/ML) based air interface natively.The wireless industry anticipates that a future 6G standard supports an Artificial Intelligence / Machine Learning (AI/ML) based air interface natively. In this joint demonstration, Rohde & Schwarz and Nvidia demonstrate a neural receiver approach, using a trained machine learning model for signal processing tasks such as channel estimation, channel equalization, and demapping. Due to the lack of a 6G standard, we showcase a 5G NR PUSCH multi-user MIMO scenario, emulating two users with 2x2 MIMO, that are independently faded to simulate realistic channel conditions using the R&S SMW200A vector signal generator. The signal is captured using the MSR4 satellite receiver and transferred to a server. Our server-based testing (SBT) framework, including vector signal explorer (VSE) microservices is used to pre-process the data. The generated post-FFT data is input to

Testing 6G JCAS in FR2 frequency bands

The demo includes R&S signal generators and signal and spectrum analyzers to demonstrate and visualize cutting edge JCAS test capabilities by Rohde & Schwarz.

Wi-Fi 7 (IEEE 802.11be) 4x4 true-MIMO testing

Rohde & Schwarz demonstrates Wi-Fi 7 (IEEE 802.11be) 4x4 true MIMO measurements up to 320 MHz bandwidth and up to 6 GHz frequency band based on the R&S CMP180 CMPflexx system using a Wi-Fi 7 router as device under test (DUTs).

Mobile Network Testing in Private networks

The pre-condition, to reach the expected Service Level of Quality is a good network deployment in an interferer free area. Measuring, troubleshooting and verifying the network availability, throughput and latencies is the key, ensuring full functionality for mission critical use-cases in all kind of private networks or in a B2B environment

Strong security for critical infrastructure

Find out more about IP networks of ANSP infrastucture and network encryption for air traffic control.

Advanced voice quality assurance system

Find out more about insightful analytics and detailed monitoring of ATC voice networks.

High availability 5kW HF high-power transmitters

Find out more about 5 kW HF transmitter from Rohde & Schwarz provides improved quality and high availability.

LDACS paves the way to ATM digitalization

Find out more about LDACS (L-band Digital Aeronautical Communications System), the new air-to-ground communications standard.

Secure call-sign identification

Find out more about ATC direction finders for situational awareness and secure call-sign identification from Rohde & Schwarz.

Network integration flexibility

Find out more about flexible network integration from ATC software defined radios from Rohde & Schwarz.

Lifecycle support through service level agreements

Find out more about long-term availability and operational readiness with CERTIUM SERVICE from Rohde & Schwarz.

Application video: Accelerating ADAS-AD with Hardware-in-the-Loop Testing

High-Precision In-Band Radar Test Solution

Check out R&S high-precision in-band radar testing solutions live from the show floor at CES 2022.

CES: Automotive Radar Object Simulation for Validation

Check out R&S Automotive Radar Object Simulation solutions for validations, live from the show floor at CES 2022.

CES: Ultra-Wideband Device Testing

Check out this brief demo on R&S solutions for ultra-wideband devices. Live from the CES 2022 trade show.

Rohde & Schwarz Technology Symposium 2021

NPR (Noise Power ratio) measurements with the R&S®FSWP phase noise analyzer

The R&S®FSWP with its outstanding sensitivity to measure phase noise is now additionally equipped with the Noise power ratio (NPR) option.

SaaS RF test platform

R&S Cloud4Testing is a software as a service (SaaS) platform that offers customers access to R&S software suites such as VSE and WinIQSIM2.

5G FR2 RF testing

Tailored solution for OTA measurements thanks to high-frequency frontend modules which can be placed close to measurement chamber.

Vector receiver load-pull measurements

The combination of Maury Microwave Tuners plus IV CAD software together with the R&S®ZNA vector network analyzer makes vector receiver load-pull measurements easy.

New handheld VNA for radar & satellite ground station measurements

The R&S®ZNH is a full 2-port handheld vector network analyzer and comes in four models with maximum frequency of 4 GHz, 8 GHz, 18 GHz or 26.5 GHz.

De-embedding options for R&S VNAs

The R&S ZNB have new deembedding options integrated into the FW, which can easily be run with the R&S VNA.

6G - Extension to a D-Band antenna measurement system

The ATS1000 CATR based 5G NR mmWave test chamber is fully shielded from the outside world to provide the ideal environment for uninterrupted measurements.

Ultra wideband 802.15.4a/4z testing

Ultra-wideband communication, as standardized by IEEE 802.15.4 enables very low power communication and very accurate ranging in license-exempt spectrum.

Automotive radar testing in a compact antenna test range

The R&S®ATS1500C antenna test chamber is based on the compact antenna test range method and is specially designed for the latest automotive radar sensors.

Automotive radar signal analysis in the E-band

Automotive radar signal analysis in the E-band with up to 8.3 GHz analysis bandwidth with just a single instrument.

Phase-coherent multichannel pulse analysis

Scalable easy-to-configure solution for Radar/EW systems for accurate and phase-coherent analysis of multiple pulsed signals.

At the EuMW 2021 virtual booth we will present a new handheld instrument

High performance RF testing for 5G BTS production

Rohde & Schwarz Server-Based Testing (SBT) supports customers in accelerating their measurement tasks in automated production and component characterisation environments.

Compact CATR OTA chamber for 5G FR2 testing

Signaling test in the new mmWave-based 5G frequency of FR2 requires an OTA test setup. The R&S®ATS800R CATR rack based antenna test system is designed for FR2 over-the-air measurements in R&D.

5G multicast solution

Thanks to this solution, mobile network operators can face congestion and overload in their cellular networks when it comes to delivering highly critical live events and linear content which constitutes a big portion of video consumption.

Milimeter-wave 5G network measurements using scanners

With the release of the TSME44DC scanner downconverter, operators now have the ability to passively capture network LTE and 5G performance and quality data from the air interface.

Wake up signal test for improved power efficiency in NB-IoT devices

Rohde & Schwarz and Goodix (CommSolid) are first to demonstrate exhaustive test functions for the newly introduced NB-IoT wake up signal (NWUS), the latest 3GPP Release 15 feature for NB-IoT devices to further reduce power consumption.