Promo: What's next? Taking industry leadership or watching from the sidelines?

What's next? Taking industry leadership or watching from the sidelines?

Take the lead with up to 60% off our instruments

R&S®CMP180 radio communication tester

Enhanced frequency and bandwidth for advanced wireless technologies

R&S®CMP180 radio communication tester
Open Lightbox
R&S®CMP180 radio communication tester
Open Lightbox
R&S®CMP180 radio communication tester
Open Lightbox
R&S®CMP180 radio communication tester
Open Lightbox
R&S®CMP180 radio communication tester
Open Lightbox
R&S®CMP180 radio communication tester, Front LowR&S®CMP180 Radio Communication Tester, Side viewR&S®CMP180 Radio Communication Tester, Front HighR&S®CMP180 Radio Communication Tester, Back highR&S®CMP180 Radio Communication Tester, Side view

Key facts

  • Frequency up to 8 GHz and bandwidth up to 500 MHz
  • Up to two independent RF channels (2x VSA / 2x VSG)
  • Increased number of RF ports (2x8)
  • Self-alignment for accuracy adjustment at any time
  • Compact design of 2 HU and 19″

The future integrated

The R&S®CMP180 radio communication tester is a future-proof, non-signaling testing solution for wireless devices in research and development, validation and production. Together with advanced frequency, bandwidth and RF capabilities, it enables testing of new wireless technologies such as Wi-Fi 6E, Wi-Fi 7, 5G NR FR1 and many more. Additionally, the doubled number of analyzers (2xVSA), generators (2xVSG) and RF ports (2x8) enable simultaneous measurements of technologies and devices in a VSA/VSG single-box tester. The R&S®CMPflexx system can have four analyzers (4x VSA), four generators (4x VSG) and four times eight RF ports (4x8).

Features & benefits

Excellent RF parameters

Enables Wi-Fi 6E (WLAN 802.11ax) / Wi-Fi 7 (WLAN 802.11be) & 5G FR1 testing

The R&S®CMP180 enables Wi-Fi 6E (WLAN 802.11ax) / Wi-Fi 7 (WLAN 802.11be) & 5G FR1 measurements with a frequency range up to 8 GHz and a bandwidth of up to 500 MHz and high output power.

Future-proof hardware

Scalable for future technologies, applications and requirements

The R&S®CMP180 provides sufficient frequency, bandwidth and EVM performance even for testing of future technologies:

  • Frequency up to 8 GHz
  • Bandwidth up to 500 MHz
  • Class-leading EVM performance
  • MIMO (NR FR1 and higher order True MIMO (WLAN))
  • High output power for OTA measurements

High output power for OTA measurements
Open Lightbox

High output power for OTA measurements

R&S®CMP180 - MIMO ready (NR FR1 MIMO & higher order TrueMIMO (WLAN))

One instrument to test the entire product lifecycle

From EVT via DVT to MP

Current development and production lines for wireless devices must provide an optimum combination of flexibility, performance and capacity utilization as well as software re-utilisation. The R&S®CMP180 is more than a mass production tester. Test engineers can use the instrument throughout the entire development phase, from engineering validation tests (EVT), design validation tests (DVT) and production validation tests (PVT) to mass production (MP).

Self-alignment, on-site calibration and service

Easy self-correction using the self-alignment function

The R&S®CMP180 supports self-correction with an integrated self-alignment function, enabling users to adjust accuracy at any time. This self-alignment function can retrieve the VSA/VSG levels for the correction values stored during the manufacturing process. Additionally, Rohde & Schwarz subsidiaries around the world meet any service demands.

Integrated self-alignment function
Open Lightbox

Integrated self-alignment function

Ultimate flexibility - WLAN 4x4 true MIMO

Scale up by stacking two R&S®CMP180 testers to a R&S®CMPflexx system

R&S®CMPflexx is an extremely flexible high-end solution for WLAN 4x4 true MIMO testing.
Users can scale up by stacking two R&S®CMP180 testers and combining them to a R&S®CMPflexx system to use them together. The R&S®CMPflexx system can have four analyzers (4x VSA), four generators (4x VSG) and four times eight RF ports (4x 8). Separating the two instruments is also simple: simply disconnect the testers and each will be a standalone instrument

Two R&S®CMP180 combined to a R&S®CMPflexx system, in use for WLAN 4x4 true MIMO measurements
Open Lightbox

Two R&S®CMP180 combined to a R&S®CMPflexx system, in use for WLAN 4x4 true MIMO measurements

Uniform and intuitive operation

Discover the integrated user interface - R&S®CMsquares

The R&S®CMsquares is a unified test software solution with a browser-based user experience, combining everything that is required for wireless technology testing. From test configuration, parameterization, measurements as well as test execution in a single environment, with a dashboard style and quick access to different types of applications, it can control all new radio communication testers via a standardized GUI for a unified experience.

Parallel testing of multiple devices & technologies

Optimize utilization and reduce measuring sites

The smart channel function divides the tester into multiple sub-instruments, allowing the tester to share its hardware (VSA / VSG / RF ports) with multiple DUTs, enabling parallel testing of multiple devices and technologies.

Waveform ARB generator

Generate analog and digital signals

Run existing turnkey waveforms for different technologies and generate and run your own waveforms via R&S®WinIQSIM2.

Production testing for Wi-Fi® / NR FR1 / 7.125 GHz

Production testing for Wi-Fi® / NR FR1 / 7.125 GHz

Cellular device testing

The R&S®CMP180 radio communication is the next generation R&D and production non-signaling test platform for Wi-Fi 6E, Wi-Fi 7, 5G FR1 and many more technologies.

Test engineers can use the instrument throughout the entire development phase, from engineering validation tests, design validation tests, and production validation tests, to mass production.

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Marketing permission

Your request has been sent successfully. We will contact you shortly.
An error is occurred, please try it again later.
General and legal information

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Terms & Conditions of the Prize Draw 10 years Rohde & Schwarz oscilloscopes

1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).

2. All participators can register to the draw during January 01, 2020 to December 31, 2020 with their name, company name and business e-mail.

3. Participation is free of charge and not dependent on the purchase of goods or services.

4. The draw is only open to legal entities and only the legal entities are able to win the prizes. An individual person is not allowed to participate on its own name and its own account but as a representative of a legal entity filing the participation form in the name of and on behalf of the legal entity.

5. The prizes to win are 1 of 10 R&S®RTB2000 within the time frame January 1, 2020 to December 31, 2020:

Prize: 1x R&S®RTB2000 Digital Oscilloscope

6. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich. The winner of the prizes will be informed by e-mail within 5 (5) working days.

7. The authorized representative of the legal entity shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.

8. R&S’ employees and members of their families and also person being familiar with the process of the draw and members of their families are excluded from filling the participation form.

9. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.

10. Personal data will be processed only for the purpose of this prize draw and deleted four (4) weeks after the draw, if not agreed otherwise.

11. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Competition. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn.

12. The participants cannot claim the prizes of this draw and no legal recourse is permitted in this respect.

13. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Competition.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.