RAC-0605-0004 FSxRecordPlay is a program for recording the trace data in frequency and time domain from Rohde & Schwarz spectrum analyzers and measurement receivers via IEEE bus, LAN/Internet or internal remote control connection. The stream waveform data can be played back and analyzed directly in this software with variable speed. ESCI,FSL,FSP,FSIQ,FSMR,FSQ,FSU,FSH,FSV,FMU,ESU,ESPI,Remote Control

1MA141 This application note describes a software application that can be utilized in conjunction with Rohde&Schwarz Signal- and Spectrum Analyzers and Signal Source Analyzers to capture and analyze transient signals. The software application takes advantage of the instrument’s IQ memory buffer of up to 705 Msamples to capture and analyze IQ signals in the time domain and / or frequency domain. This

Thomas Lechner 1GP113 The R&S®TSStream multi-TS streaming software streams a number of MPEG transport stream files simultaneously over a single IP interface. The individual transport streams result in a high overall bit rate. To make the streams available on a standard PC, the R&S®TSStream software does not play the transport stream files directly from the hard disk but first loads them into the RAM

7BM52 This Application Note provides a step-by-step description of all video decoding settings you need to make. It also contains valuable information about how to optimize replay for various applications. Video,DVM,DVM50,DVM100,DVM100L,DVM400,DVM120 R&S DVM software video decoder Sub ject to change – Christian Zühlcke November 2005 R&S®DVM software video decoder The streaming interface of the R&S®

7BM08 This program applies to SFQs which are equipped with the first generation of noise generators (Var 02) and with FW version 1.24 or higher. [[ br /> One of the most important measurements of DVB systems concern noise margins. The C/N signal produced by the SFQ needs to be as accurate as possible. [[ br /> The present application note is intended to this purpose, with a special calibration process

1MA105 Unattended observation of spectrum occupancy for finding spurious emissions or seldom-occuring interferers is a common task for spectrum analyzers. Sometimes spectrum data has to be monitored over quite a long period of time. TraceRecorder, a small, free-of-charge software tool for storing measurement data from Rohde & Schwarz spectrum analyzers helps you to perform this measurement task. Running

1MA72 This Application Note presents means to integrate R&S Test and Measurement instruments into the Agilent ® ADS ® Design System. Methods to include R&S Instruments are presented, accompanied by a free-of-charge software solution which is provided with this application note. It makes it very easy to include R&S Instruments into your ADS environment and your design flow. Versions for both WINDOWS

Bernhard Schulz 1MA206 This document provides an introduction to SDR as used for military radios and presents the relevant T&M solutions offered by Rohde & Schwarz . SDR, Software Defined Radio, Military, SMU, SMU200A, SMJ, SMJ100A, SMBV, SMBV100A, AMU, AMU200A, SMB100B, AFQ, AFQ100A/B, SMA, SMA100A, SMB, SMB100A, SMC, SMC100A, SMF, SMF100A, SGS, SGS100A, FSW, FSQ, FSV, FSUP, FSMR, FSG, FSVR, FSL,

1MA27 With AMPTUNE amplifier nonlinearity can be measured with signals that are typical for the signals encountered by the amplifier in day-to-day use. The measurement can be checked by pre-distorting the control signal. Also, the results can be automatically stored for further processing with external programs. Amplifier, Non-Linearity, Nonlinearity, Distortion, IQ, AM/AM, AM/PM, AmpTune, AMIQ, FSIQ

Thomas Lechner 1GA69 This application note provides software and instructions for a simple check of the acoustic performance of mobile phones. It targets mainly service centers and repair workshops which have to perform incoming tests of defective mobile phones and final tests of repaired mobiles. A focus is set on short test times and ease of use, without compromising accuracy and repeatability of