Download Center

Describes all instrument functions and remote control commands, as well as measurement and programming examples.

English - 2020年8月7日

RSCommander is a versatile software tool for a wide range of Rohde & Schwarz spectrum-, network analyzers, signal generators and oscilloscopes. It allows for automatic instrument discovery, making screenshots, reading traces, file transfer and simple script creation.

English - 2017年12月24日

R&S®ZVA, R&S®ZVT Application Sheets

English - 2014年7月28日

Provides the information required to prepare the instrument for use and start working.

English - 2015年3月9日

This document describes the typical measurements performed on mixers and how they can be implemented on the ZVA Vector Network Analyzer with the ZVA-K4 Frequency Conversion option. The document describes the concept and setups required to perform Conversion Loss, Isolation, Intermodulation and Reflection measurements.

English - 2009年5月6日

This application note describes how to directly transfer S-Parameter Trace Data from R&S Network Analyzers to Microsoft Excel using a direct connection like GPIB or LAN. Prerequisites are a PC running Microsoft Excel, a R&S Network analyzer like ZVA, ZVB or ZVT as well as a working remote control connection between PC and instrument like GPIB or LAN / Ethernet.

English - 2007年3月22日

The Technical Information provides basic information on the calibration units R&S ZV-Z58 and ZV-Z59.

English - 2018年9月21日

English - 2020年7月29日

English - 2012年4月15日

English - 2022年3月3日

Rohde & Schwarz instruments can be shared when users wish to use the same instrument. This can be done quite easily with the LAN interface, which comes as a standard option. Through this interface, Rohde & Schwarz instruments can be connected directly to a network, and users with access to the network can manually operate the instrument from a remote computer. This Application Note lists all instruments that support these features and describes the steps necessary to set up and configure the network connection to operate these instruments remotely.

English - 2007年7月5日

Provides the information required to prepare the instrument for use and start working.

English - 2025年12月4日

This application note describes how to configure a Rohde & Schwarz Network Analyzer to make spectral measurements directly on a device under test.

English - 2012年3月15日

Describes all instrument functions.

English - 2024年7月10日

This Application Note describes characterization of devices used in radar systems with pulsed signals. The emphasis is on measurements using vector network analyzers (VNAs), signal generators, vector signal generators and spectrum analyzers.

English - 2008年1月18日

Spectrum and network analyzers equipped with network interface cards can be integrated in Local Area Networks (LAN). This Application Note describes how to remote control these instruments over a LAN and use VXIpnp instrument drivers over a LAN.

English - 2003年6月25日

This application note describes the noise figure measurement using the R&S Vector Network Analyzers of the ZVA and ZVT series. It explains the concept of measuring noise figure without the need for a characterized noise source. Furthermore, it discusses different measurement applications and the respective setup and implications. Some examples guide through the instrument setups and show measurement results as well.

English - 2010年10月27日

This document describes how the advanced calibration techniques of the ZVA Vector Network Analyzers can solve the challenges of measuring the S-Parameters on impedance matching devices. The document describes the concept and setup required to perform the calibration of the ZVA and making the measurement. The procedure described in this application note applies to the ZVB and ZVT Vector Network Analyzers as well.

English - 2009年5月6日

Provides basic information on the calibration kits R&S ZV-Z129, ZV-Z135 and ZV-Z170.

English - 2013年11月21日

Balanced RF components are advantageous compared to traditional single-ended components, since they cause less EMI, and are less susceptible to EMI. This application note describes the fundamental concepts of differential and common mode signals and of mixed-mode parameters, which are essential for balanced components. Techniques for the measurement of mixed-mode parameters are presented. Examples show the features implemented in the ZVB for balanced device measurement.

English - 2004年9月20日

Provides information on security issues when working with R&S®ZVAX-TRM in secure areas.

English - 2017年3月20日

Provides the information required to prepare the instrument for use and start working.

English - 2014年7月28日

This application note describes how to integrate R&S®ZVA/ZVB/ZVT vector network analyzers with AWR's electronic design automation (EDA) software. Measured data can be exported using the AWR® TestWave™ tool via GPIB/LAN and verified with simulated data. Basic filter design is simplified with the AWR® iFilter™ filter synthesis wizard, an optimization tool that can be introduced to correlate measured data with simulated data.

English - 2010年6月1日

Describes all instrument functions and remote control commands, as well as measurement and programming examples.

English - 2015年12月11日

Provides basic information on the calibration kits R&S®ZCWM-570.

English - 2016年12月23日