For larger samples such as grills or bumpers, it might be more applicable to move the measurement equipment instead of the sample. Automotive radars are usually mounted behind bumpers or radomes and the material RF transmission and reflection characteristics affect the performance of the radar sensor and the safety-critical system it supports. For example, radome inhomogeneity or too much attenuation

This webinar presents details on the individual test cases of the compliance test and provides useful information on the required test setup. With the introduction of Ethernet in cars, a new class of interface quality tests is required. The OPEN alliance has released a test specification for BroadR-Reach Ethernet. Like most IEEE Ethernet compliance test specifications, the compliance test focuses on

Expert Talk Oscilloscop: RS232 analysis In depth analysis of RS232 interfaces frame by frame using the R&S®RTO decode table and zoom window. In depth analysis of RS232 interfaces frame by frame using the R&S®RTO decode table and zoom window. Oscilloscope bus debugging, RTO2000, bus debugging, RS232 Watch this in depth analysis of RS232 interfaces frame by frame using the R&S®RTO decode table and zoom

Rohde & Schwarz addresses at Mobile World Congress 2019 how communication service providers (CSPs) can use IP network traffic analytics to secure granular visibility of entire networks via real-time reporting on network and subscriber data. Rohde & Schwarz addresses at Mobile World Congress 2019 how communication service providers (CSPs) can use IP network traffic analytics to secure granular visibility

Signal Analysis with VSE software The R&S VSE software offer a comprehensive set of analysis options for RF signal analysis. This video demonstrates how easy the VSE software can analyze a 5G FR2 signal that was captured and downconverted by the FE44S external frontend and acquired by the RTP oscilloscope. The R&S VSE software offer a comprehensive set of analysis options for RF signal analysis. This

This video shows how to perform intermodulation measurements on devices under test, in this case an amplifier, on the R&S®ZNA. This video shows how to perform intermodulation measurements on devices under test, in this case an amplifier, on the R&S®ZNA. This includes the configuration, calibration with R&S®NRP Power Sensor and a short hint how to check the measurement setup. Video, ZNA, Intermodulation

Learn in this short video about R&S®ELEKTRA EMC test automation software how to set up the signal path switching. The R&S®ELEKTRA test software controls complete EMC systems and automates measurements of equipment under test (EUT) being certified for emissions (EMI) and immunity (EMS). R&S®ELEKTRA simplifies configuration of test systems and test descriptions in accordance with common standards. Learn

The R&S®NRQ6 frequency selective power sensor This video provides an introduction to the R&S®NRQ6 frequency-selective power sensor and how to configure it for many common measurement applications. Examples are trace and ACLR measurements. Also the setup using the PoE switch is introduced. This video provides an introduction to the R&S®NRQ6 frequency-selective power sensor and how to configure it for

Rohde & Schwarz MNT already hold a reference position in the market for measuring QoE of mobile networks. The emergence of 5G brings new use cases and services. Hanspeter Bobst (Vice President R&S MNT) discusses in an interview with The Mobile Network on MWC2019 how QoE in 5G will be different and that test approaches have to be adapted. Rohde & Schwarz MNT, 5g, Interview, MWC2019 Hanspeter Bobst (

This video shows how to measure the phase noise of a frequency drifting DUT using the IQ/FFT mode of the R&S®FSV3-K40 phase noise measurement option. This video shows how to measure the phase noise of a frequency drifting DUT using the IQ/FFT mode of the R&S®FSV3-K40 phase noise measurement option. video, FSV3000, phase noise, VCO phase noise, FSV3-K40 This video shows how to measure the phase noise

Understanding Derating Curves Understanding Derating Curves Understanding Derating Curves

R&S®ZNL Vector Network Analyzer - Media center

SpaceWire protocol triggering and decode. SpaceWire is a new serial bus standard for aircraft and areospace applications that supports bit rate up to 400 Mbps. The Rohde & Schwarz option K65, SpaceWire trigger & decode, for R&S®RTE and R&S®RTO offers triggering and decoding of SpaceWire protocol communication. Video, RTO2000, Oscilloscope, SpaceWire Triggering & Decoding The Rohde & Schwarz option

How to accelerate and improve measurements of gain transfer curves This video shows how to profit from the high dynamic uninterrupted level sweep feature of the Rohde & Schwarz ® SMA100B for measuring gain transfer curves of amplifiers. This video shows how to profit from the high dynamic uninterrupted level sweep feature of the Rohde & Schwarz ® SMA100B for measuring gain transfer curves of amplifiers

This video presents how to create simple pulse sequences by using repetitions and loops together with pulses with R&S®SMW200A and R&S®Pulse Sequencer software. This video presents how to create simple pulse sequences by using repetitions and loops together with pulses with R&S®SMW200A and R&S®Pulse Sequencer software. Building sequences, R&S®Pulse sequencer software, signal generation This video presents

Wireless communication over non-terrestrial networks (NTN) have become a major boost of interest since the launch of SOS messaging via satellites on the Iphone 14. Besides NTN in 5G, the technology is also added for legacy technologies such as NB-IoT. The main use case is to provide global network coverage via satellites in case of an emergency in rural or remote areas as well as worldwide tracking

This video shows how to perform pulse compression measurements with the R&S®FSW-K6S time sidelobe measurement application. This video shows how to perform pulse compression measurements with the R&S®FSW-K6S time sidelobe measurement application. video, FSW, spectrum analyzer, signal analyzer, high performance, wideband This video shows how to perform pulse compression measurements with the R&S®FSW-K6S

Integrated R&S®RTB-B6 waveform and pattern generator. The integrated R&S®RTB-B6 waveform and pattern generator up to 50 Mbit/s is useful for educational purposes and for implementing prototype hardware. Apart from the common sine, square/pulse, ramp and noise waveforms, it outputs arbitrary waveforms and 4-bit signal patterns. Waveforms and patterns can be imported as CSV files or copied from oscilloscope

Watch this video to learn more about powerful tools to solve UWB test challenges in R&D, for FiRa certification and in mass production The R&S CMP200 radio communication tester is the ideal instrument for all UWB device development steps. Combined in different setups, it is a powerful tool to solve UWB test challenges in R&D, for FiRa certification and in mass production. Being able to reuse the same

Signal flow diagrams in the dialog boxes visualize the signal processing, making it easier to configure measurements. Signal flow diagrams in the dialog boxes visualize the signal processing, making it easier to configure measurements. Crosslinks take you directly to logically related settings. Forward/back buttons help you navigate quickly between dialog boxes. Semi-transparent dialog boxes are an

Operators are facing the challenge of quickly deploying new technologies, such as Gigabit LTE and 5G, in order to access the commercial opportunities presented by IoT, mission-critical services and enhanced mobile broadband. The Smart platform from Rohde & Schwarz mobile network testing is a software suite covering lab engineering, field acceptance, optimization, benchmarking and monitoring with common

Because cellular V2X enables safety-critical functions, its correct operation must be ensured in demanding environments. Watch this video. Because C-V2X enables safety-critical functions, its correct operation must be ensured even in the most demanding environments such as a built up city and in dense traffic. Ensuring C-V2X works in the real world, starts in the development lab. The function of chipsets

AM, FM and RDS Testing This video explains how to use a Rohde & Schwarz SMCV100B vector signal generator to create those test signals Analog audio broadcasts can be transmitted either as amplitude modulated (AM) or frequency modulated (FM) signals. In addition to the purely analog, audio-only signal, newer technologies such as the Radio Data System (RDS) and the Data Radio Channel (DARC). This video

Presenters: Juergen Kausche Alexander Scholl Feng Xie Product Manager, Rohde & Schwarz Many IoT and connected devices rely on wireless technology, such as Wi-Fi. Their compact design often excludes an accessible antenna port, creating an additional test challenge when it comes to demonstrating compliance with RED or FCC regulations. Many IoT and connected devices rely on wireless technology, such as

Frankfurt is the world’s first airport to regularly employ walk-through scanners for passenger security checks. Frankfurt Airport (FRA) is the world’s first airport to regularly employ walk-through millimeterwave scanners for passenger security checks. Following a roughly one-year test phase at Concourse A in Terminal 1, the German Federal Police have authorized the full-scale use of the Rohde & Schwarz

R&S®RTO6 achieves up to 1 million waveforms per second With optimized signal processing, R&S®RTO6 oscilloscopes reach an exceptional update rate. The unique architecture allows the R&S®RTO6 to acquire, process and display up to 1 million waveforms/s. The high update rate is achieved even when histograms, masks or cursor measurements are active. With optimized signal processing, R&S®RTO6 oscilloscopes

A guide to carrying out a 1000BASE-T1 compliance tests with test mode 2 (MDI jitter and clock frequency) on an R&S®RTO. The video gives an overview of how to configure the setup and generate test reports for further analysis. A guide to carrying out a 1000BASE-T1 compliance tests with test mode 2 (MDI jitter and clock frequency) on an R&S®RTO. The video gives an overview of how to configure the setup

The demands for faster wireless access and lower latency are continuously increasing. To meet these demands and to drive new use cases, regulatory bodies around the world open up spectrum in the 6 GHz band for unlicensed use. This new spectrum allows the Wi-Fi 6 standard, IEEE 802.11ax, to unfold its full power. It will also pave the way for the successful deployment of the next evolutionary step:

Seamless integration of legacy applications The R&S®GW5440 Universal Media Gateway is a flexible system of media and server cards used as a radio, VCS and telephony gateway. The Universal Media Gateway is a flexible system of media and server cards used as a radio, VCS and telephony gateway with E&M interfaces as well as analog and digital telephone lines via various interfaces. Each interface card

R&S®MXO 5 - Evolved for more challenges Big High Resolution Display R&S®MXO 5 SERIES OSCILLOSCOPE R&S®MXO 5 SERIES OSCILLOSCOPE