Key facts
Starting at GBP6,150
The R&S®ZVH is a rugged, handy cable and antenna analyzer, designed for use in the field. Its low weight and simple operation make it indispensable for anyone who needs an efficient measuring instrument outdoors for the installation and maintenance of antenna systems.
Fast and accurate measurements
Wizard function allows users to preconfigure test setups before going to the field. Pictures and test instructions can be inserted to aid the technican on site. This speeds up measurements on-site and reduces measurement errors due to entering the wrong parameters or having the wrong setup. The wizard function simplifies complex test sequences and eliminates the need to always ask how to configure the test setup.
Fast and accurate measurements - use the wizard
Predefined test sequence, pictures and comments can be inserted to provide helpful information to the user.
The capability of the R&S®ZVH can be extended by purchasing keycodes licences. With R&S®ZVH-K42, it can perform 2-port vector network analysis to determine the matching and transmission characteristics of filters, amplifiers, etc. R&S®ZVH-K1 adds spectrum analysis to measure the signal occupied bandwidth, field strength and spurious emissions, etc. There are more functions that the analyzer can handle. It is an ideal, handy tool in the field.
2-port measurements, spectrum analysis
Measuring the S-parameters of a device under test (DUT). Measuring the occupied bandwidth of a signal.
The top handle makes it easy to carry the analyzer. It can also hang on the tower or equipment rack for hands-free operation on site without needing additional accessories to support it.
Designed with portability in mind
No matter where your task takes you, you can conveniently take and measure with the R&S®ZVH.
R&S®InstrumentView is free software to remote control the analyzer, preconfigure measurement settings, perform postanalysis and generate reports. The connection to the computer or laptop is via USB or LAN interface. Alternatively, simply connect a commercially available wireless router to the analyzer via LAN interface and download the free R&S®MobileView app on your smartphone or tablet to remote control the analyzer or transfer files to and from the analyzer.
Simple connectivity
Simple and hassle-free connection via LAN or USB port. The analyzer can be remote controlled with the free R&S®InstrumentIview software or R&S®MobileView app.
Order number 1309.6800.24
Order number 1309.6800.28
| R&S®ZVH4 | R&S®ZVH8 | ||
| Frequency range | 100 kHz to 3.6 GHz | 100 kHz to 8 GHz | |
| Standard measurement functions | reflection measurement, distance-to-fault measurement, one-port cable loss measurement | ||
| Output power (port 1, port 2) | 0 dBm to –40 dBm (nominal), in 1 dB steps | ||
| Maximum permissible spurious signal level | +17 dBm (nominal) | ||
| Number of points | 101, 201, 401, 601, 631, 801, 1001, 1201 | ||
| Distance-to-fault (DTF) measurement | |||
| Display modes | return loss (dB), VSWR | ||
| Resolution in meters | (1.58 × velocity factor/span) | ||
| Horizontal display range | 3 m to 1500 m | ||
| Reflection measurement | |||
| Directivity | 100 kHz to 3 GHz (nominal) | > 43 dB (nominal) | > 43 dB (nominal) |
| 3 GHz to 3.6 GHz | > 37 dB (nominal) | > 37 dB (nominal) | |
| 3.6 GHz to 6 GHz | – | > 37 dB (nominal) | |
| 6 GHz to 8 GHz | – | > 31 dB (nominal) | |
| Display modes | s11, return loss (dB), VSWR, one-port cable loss | ||
| vector network analysis (R&S®ZVH-K42) | s11, s22, magnitude, phase, magnitude + phase, Smith chart, VSWR, reflection coefficient, mρ, one-port cable loss, electrical length, group delay | ||
| vector voltmeter (R&S®ZVH-K45) | magnitude + phase, Smith chart | ||
| Transmission measurement (R&S®ZVH-K39 or R&S®ZVH-K42) | |||
| Dynamic range (S21, S12) | 100 kHz to 300 kHz | > 50 dB (nominal) | > 50 dB (nominal) |
| 300 kHz to 2.5 GHz | > 80 dB, typ. 100 dB | > 80 dB, typ. 100 dB | |
| 2.5 GHz to 3.6 GHz | > 70 dB, typ. 90 dB | > 70 dB, typ. 90 dB | |
| 3.6 GHz to 6 GHz | – | > 70 dB, typ. 90 dB | |
| 6 GHz to 8 GHz | – | > 50 dB (nominal) | |
| Display modes | transmission measurement (R&S®ZVH-K39) | s21, magnitude in dB (loss, gain) | |
| vector network analysis (R&S®ZVH-K42) | s21, s12, magnitude (loss, gain), phase, magnitude + phase, electrical length, group delay | ||
| vector voltmeter (R&S®ZVH-K45) | magnitude + phase | ||
| DC voltage supply (DC bias, port 1 and port 2) | |||
| Voltage range | internal voltage supply | +12 V to +32 V, in 1 V steps | |
| Maximum output power | 4 W (battery), 10 W (AC supply) | ||
| Maximum current | 500 mA | ||
| Maximum voltage | external voltage supply | 50 V | |
| Maximum current | 600 mA | ||
| General data | |||
| Display | 6.5" color LCD with VGA resolution | ||
| Battery operating time | R&S®HA-Z204, 4.2 Ah | up to 3 h | |
| R&S®HA-Z206, 6.3 Ah | up to 4.5 h | ||
| Dimensions (W × H × D) | 194 mm × 300 mm × 69 mm (144 mm) 1), 7.6 in × 11.8 in × 2.7 in (5.7 in) 1) | ||
| Weight | < 3 kg, 6.6 lb | ||
| Product | Description | |
|---|---|---|
|
R&S®ZVH-K1 Order number 1309.6823.02 |
Description Spectrum Analysis Application |
|
R&S®ZVH-K9 Order number 1309.6852.02 |
Description Power Meter Measurement Application with R&S®FSH-Zxx or R&S®NRP-Zxx power sensors (R&S®FSH-Zxx or R&S®NRP-Zxx power sensors required; for R&S®NRP-Zxx power sensors + R&S®NRP-Z4 required (software license)) |
|
R&S®ZVH-K14 Order number 1309.7007.02 |
Description Spectrogram Measurement Application |
|
Order number 1304.5987.02 |
Description Channel Power Meter |
|
Order number 1304.0491.02 |
Description Pulse Measurements with Power Sensor (Software License) (requires R&S®FSH-Z129 for R&S®ZVH4 with serial numbers < 115331 and R&S®ZVH8 with serial numbers < 115239) |
|
R&S®ZVH-K39 Order number 1309.6830.02 |
Description Transmission Measurement Application |
|
R&S®ZVH-K40 Order number 1309.7013.02 |
Description Remote Control via USB or LAN Application |
|
R&S®ZVH-K42 Order number 1309.6846.02 |
Description Vector Network Analysis Application |
|
R&S®ZVH-K45 Order number 1309.6998.02 |
Description Vector Voltmeter Measurement Application |
| Product | Description | |
|---|---|---|
|
R&S®HA-Z202 Order number 1309.6117.00 |
Description Vehicle Adapter for Power Supply |
|
R&S®HA-Z203 Order number 1309.6123.00 |
Description Battery Charger for Lithium-Ion battery pack, 4.2 Ah/6.3 Ah (battery pack not included) |
|
R&S®HA-Z204 Order number 1309.6130.00 |
Description Lithium-Ion Battery Pack, 4.2 Ah |
|
|
R&S®HA-Z206 Order number 1309.6146.00 |
Description Lithium-Ion Battery Pack, 6.3 Ah |
|
|
R&S®HA-Z220 Order number 1309.6175.00 |
Description Carrying bag soft carrying bag |
|
R&S®HA-Z321 Order number 1321.1357.02 |
Description Hard Case for R&S®Spectrum Rider |
|
R&S®HA-Z222 Order number 1309.6198.00 |
Description Carrying Holster chest strap and rainproof cover |
|
R&S®HA-Z223 Order number 1309.6075.00 |
Description Shoulder Strap for Carrying Holster |
|
|
R&S®HA-Z232 Order number 1309.6223.00 |
Description SD Memory Card 4 Gbyte |
|
|
R&S®HA-Z240 Order number 1309.6700.03 |
Description GPS Receiver |
|
|
R&S®FSH-Z36 Order number 1145.5838.02 |
Description Headphones |
|
R&S®HA-Z211 Order number 1309.6169.00 |
Description Spare USB cable |
|
R&S®HA-Z210 Order number 1309.6152.00 |
Description Spare LAN cable |
|
R&S®HA-Z201 Order number 1309.6100.00 |
Description Spare AC Power Supply |
|
|
R&S®ZVH-Z45 Order number 1309.6946.00 |
Description Spare CD ROM with R&S®ZVHView software and documentation |
|
|
R&S®ZVH-Z46 Order number 1309.6900.12 |
Description Printed Quick Start Guide for R&S®ZVH, English |
|
|
R&S®ZVH-Z47 Order number 1309.6900.11 |
Description Printed Quick Start Guide for R&S®ZVH, German |
| Product | Description | |
|---|---|---|
|
R&S®TS95A16 Order number 1118.6943.16 |
Description GSM/UMTS/CDMA Antenna with magnetic mount, 850/900/1800/1900/2100 band, N connector |
|
|
R&S®HA-Z1900 Order number 1328.6825.02 |
Description Yagi antenna, 1710 MHz to 1990 MHz |
|
R&S®HA-Z900 Order number 1328.6283.02 |
Description Yagi antenna, 824 MHz to 960 MHz |
|
R&S®HA-Z901 Order number 3626.2757.02 |
Description RF cable (length: 1 m), DC to 6 GHz, N male/N male connectors |
|
R&S®HA-Z902 Order number 1328.6883.02 |
Description Carrying bag for R&S®HA-Z900 or R&S®HA-Z1900 Yagi antenna |
|
Order number 4104.6000K04 |
Description Antenna Basic Handheld Directional Antenna |
|
R&S®HE400KB Order number 4104.7770.04 |
Description Cable set for R&S®HE400BC (requires R&S®HE300USB) |
|
|
Order number 4104.6000K02 |
Description Antenna Handheld Directional Antenna |
|
R&S®HE400-K Order number 4104.7770.02 |
Description Cable set for R&S®HE400BC (requires R&S®HE300USB) |
|
|
R&S®HE400HF Order number 4104.8002.02 |
Description HF antenna module, 8.3 kHz to 30 MHz HF antenna module, 8.3 kHz to 30 MHz (handle to be bought separately) |
|
R&S®HE400VHF Order number 4104.8202.02 |
Description VHF antenna module, 20 MHz to 200 MHz VHF antenna module, 20 MHz to 200 MHz (handle to be bought separately) 20 MHz to 200 MHz |
|
R&S®HE400UWB Order number 4104.6900.02 |
Description UWB antenna module, 30 MHz to 6 GHz UWB antenna module, 30 MHz to 6 GHz (handle to be bought separately) 30 MHz to 6 GHz |
|
R&S®HE400LP Order number 4104.8402.0 |
Description Log-periodic antenna module, 450 MHz to 8 GHz Log-periodic antenna module, 450 MHz to 8 GHz (handle to be bought separately) 450 MHz to 8 GHz |
|
R&S®HE400CEL Order number 4104.7306.02 |
Description Cellular antenna module, 700 MHz to 2.5 GHz Cellular antenna module, 700 MHz to 2.5 GHz (handle to be bought separately) 700 MHz to 2500 MHz |
|
R&S®HE-300USB Order number 4080.9440.02 |
Description USB adapter, for R&S®HE300/R&S®HL300 |
|
R&S®HA-Z350 Order number 1321.1405.02 |
Description Log-periodic OEM antenna, 700 MHz to 4 GHz |
|
|
R&S®FSH-Z320 Order number 1309.6600.00 |
Description RF cable (length: 1 m), DC to 8 GHz, armored, N male/N female connectors for R&S®FSH-K41 option, DC to 8 GHz |
|
|
R&S®FSH-Z321 Order number 1309.6617.00 |
Description RF cable (length: 3 m), DC to 8 GHz, armored, N male/N female connectors for R&S®FSH-K41 option, DC to 8 GHz |
|
|
R&S®HA-Z340 Order number 1321.1392.02 |
Description GPS Receiver for R&S®Spectrum Rider |
|
R&S®TS-EMF Order number 1158.9295.05 |
Description Portable EMF measurement system, hard case Hard Case |
|
|
Order number 1074.5719.02 |
Description Isotropic antenna, 30 MHz to 3 GHz, for R&S®TS-EMF 30 MHz to 3 GHz for R&S®TS-EMF (Delivered with individual calibration data (factory calibration) as standard.) |
|
Order number 1074.5702.02 |
Description Isotropic antenna, 700 MHz to 6 GHz, for R&S®TS-EMF 700 MHz to 6 GHz for R&S®TS-EMF (Delivered with individual calibration data (factory calibration) as standard.) |
|
Order number 1074.5690.02 |
Description Isotropic antenna, 9 kHz to 200 MHz, for R&S®TS-EMF 9 kHz to 200 MHz for R&S®TS-EMF (Delivered with typical calibration data as standard.) |
|
Order number 1158.9250.02 |
Description Converter cable |
|
R&S®RAM Order number 0358.5414.02 |
Description Matching pad, 75 Ω, L section bidirectional, 0 Hz to 2.7 GHz, N (f)/N (m) connectors, load capacity 2 W, L section |
|
R&S®RAZ Order number 0358.5714.02 |
Description Matching pad, 75 Ω, series resistor 25 Ω 0 Hz to 2.7 GHz |
|
R&S®FSH-Z38 Order number 1300.7740.02 |
Description Matching pad 50/75 Ω, L section, N to BNC bidirectional, 0 Hz to 1 GHz, BNC female/N male connectors, load capacity 1 W |
|
|
R&S®Adapter BNC N Order number 0118.2812.00 |
Description N - BNC Adapter (N male - BNC female) |
|
|
R&S®Adapter N Order number 0092.6581.00 |
Description N - Adapter (N male - N male) |
|
|
R&S®Adapter SMA N Order number 4012.5837.00 |
Description N- Adapter (N male - SMA female) |
|
|
R&S®Adapter N1 6 F Order number 3530.6646.00 |
Description N - Adapter (N male - 7/16 female) |
|
|
R&S®Adapter N 16 M Order number 3530.6630.00 |
Description N - Adapter (N male - 7/16 male) |
|
|
R&S®Adapter N FME F Order number 4048.9790.00 |
Description N - Adapter (N male - FME female) |
|
|
R&S®Adapter N BNC M Order number 0017.6742.00 |
Description N - BNC Adapter (BNC male - banana female) |
|
|
Order number 1035.1700.52 |
Description High-Power Attenuator, 50 W 0 Hz to 6 GHz, 20 dB |
|
|
R&S®RBU100 Order number 1073.8495.03 (3 dB) / 1073.8495.06 (6 dB) / 1073.8495.10 (10 dB) / 1073.8495.20 (20 dB) / 1073.8495.30 (30 dB) |
Description High-Power Attenuator, 100 W 0 Hz to 2 GHz |
|
|
Order number 1147.2736.02 |
Description E and H near-field probe set |
|
Order number 1339.4141.02 |
Description H near-field probe set |
|
Order number 1147.2720.02 |
Description Preamplifier 100 kHz to 3 GHz, 20 dB gain, for R&S®HZ-15 and R&S®HZ-17 probe sets |
| Product | Description | |
|---|---|---|
|
Order number 1120.6001.02 |
Description Directional power sensor Directional power sensor, 25 MHz to 1 GHz |
|
Order number 1165.2305.02 |
Description Directional power sensor Directional power sensor, 200 MHz to 4 GHz |
|
Order number 1417.0409.02 / 1417.0409.04 |
Description Two-Path diode power sensors Universal power sensor, 10 MHz to 8 GHz, 100 mW, two-path Measurement range: -60 dBm to +20 dBm, |
|
Order number 1417.0309.02 |
Description Two-Path Diode Power Sensors Universal power sensor, 10 MHz to 18 GHz, 100 mW, two-path Measurement range: -60 dBm to +20 dBm, |
|
Order number 1137.9009.02 |
Description Wideband Power Sensor Time domain analysis and automatic pulse analysis for radar applications and universal use Measurement range: -60 dBm to +20 dBm, |
|
Order number 1411.7501.02 |
Description Wideband Power Sensor Time domain analysis and automatic pulse analysis for radar applications and universal use Measurement range: -60 dBm to +20 dBm, |
|
Order number 1417.0109.40 |
Description Wideband Power Sensor Time domain analysis and automatic pulse analysis for radar applications and universal use Measurement range: -60 dBm to +20 dBm, |
|
Order number 1417.0109.44 |
Description Wideband Power Sensor Time domain analysis and automatic pulse analysis for radar applications and universal use Measurement range: -60 dBm to +20 dBm, |
|
Order number 1419.0006.02 |
Description Three-path diode power sensor For USB operation Measurement range: 100 pW to 200 mW |
|
Order number 1419.0029.02 |
Description Three-Path Diode Power Sensor For USB operation Measurement range: 100 pW to 200 mW |
|
Order number 1419.0064.02 |
Description Three-Path Diode Power Sensor For USB operation Measurement range: 100 pW to 200 mW |
|
Order number 1419.0041.02 |
Description Three-Path Diode Power Sensor For USB operation Measurement range: 100 pW to 100 mW |
|
Order number 1419.0087.02 |
Description Three-Path Diode Power Sensor For USB operation Measurement range: 100 pW to 100 mW |
|
R&S®NRP18T Order number 1424.6115.02 |
Description Thermal power sensor 300 nW to 100 mW, DC to 18 GHz |
|
R&S®NRP33T Order number 1424.6138.02 |
Description Thermal Power Sensor 300 nW to 100 mW, DC to 33 GHz |
|
R&S®NRP40T Order number 1424.6150.02 |
Description Thermal Power Sensor 300 nW to 100 mW, DC to 40 GHz |
|
R&S®NRP50T Order number 1424.6173.02 |
Description Thermal Power Sensor |
|
R&S®NRP67T Order number 1424.6196.02 |
Description Thermal Power Sensor |
|
R&S®NRP110T Order number 1424.6215.02 |
Description Thermal Power Sensor |
|
Order number 1424.6796.02 |
Description Average Power Sensor 100 pW to 200 mW, 8 kHz to 6 GHz |
|
Order number 1424.6815.02 |
Description Average Power Sensor 100 pW to 200 mW, 8 kHz to 18 GHz |
|
Order number 1146.8001.02 / 1146.8001.04 / 1146.8001.06 / 1146.8001.11 |
Description USB Adapter (passive) For all R&S®NRP-Z sensors. The R&S®NRPZ4 passive USB adapter provides all basic functions, as it handles the transmission of settings and measurement data as well as the power supply of the sensor via the USB bus. Available cable lengths: Available cable lengths: 2.0m, 0.5m and 0.15m Available cable length for panel-mount: 1m |
|
|
R&S®NRP-ZKU Order number 1419.0658.03 |
Description USB interface cable, length: 1.5 m |
|
R&S®FSH-Z129 Order number 1304.5887.00 |
Description Adapter cable for R&S®NRP-Z8X power sensors and R&S®FSH-Z29 option |
|
|
R&S®FSH-Z144 Order number 1145.5909.02 |
Description USB adapter cable USB adapter cable for R&S®FSH-Z14/R&S®FSH-Z44 power sensors |
| Product | Description | |
|---|---|---|
|
R&S®HA-Z360 Order number 1334.5162.00 |
Description OEM USB Optical Power Meter (Germanium) |
|
R&S®HA-Z361 Order number 1334.5179.00 |
Description OEM USB Optical Power Meter (filtered InGaAs) |
|
R&S®HA-Z362 Order number 1334.5185.00 |
Description SC Adapter for Optical Power Meter |
|
R&S®HA-Z363 Order number 1334.5191.00 |
Description LC Adapter for Optical Power Meter |
|
R&S®HA-Z364 Order number 1334.5204.00 |
Description 2.5 mm Universal Adapter for Optical Power Meter |
|
R&S®HA-Z365 Order number 1334.5210.00 |
Description 1.25 mm Universal Adapter for Optical Power Meter |
|
R&S®HA-Z366 Order number 1334.5227.00 |
Description Patch Cord SC-LC SM, SX, length: 1 m |
|
R&S®HA-Z367 Order number 1334.5233.00 |
Description Patch Cord SC-SC SM, SX, length: 1 m |
| Product | Description | |
|---|---|---|
|
R&S®FSH-Z29 Order number 1300.7510.03 |
Description Combined Open/Short/50 Ω Load Calibration Standard, for calibrating the VSWR and DTF measurement DC to 3.6 GHz forR&S®FSH4/R&S®FSH8 |
|
R&S®FSH-Z28 Order number 1300.7810.02 |
Description Combined Open/Short/50 Ω Load Calibration Standard, for calibrating the VSWR and DTF measurement DC to 8 GHz for R&S®FSH |
|
R&S®ZN-Z103 Order number 1321.1828.02 |
Description Calibration unit, 1 port, N (f), 2 MHz to 4 GHz |
Related products
Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.
Terms & Conditions of the Prize Draw 10 years Rohde & Schwarz oscilloscopes
1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).
2. All participators can register to the draw during January 01, 2020 to December 31, 2020 with their name, company name and business e-mail.
3. Participation is free of charge and not dependent on the purchase of goods or services.
4. The draw is only open to legal entities and only the legal entities are able to win the prizes. An individual person is not allowed to participate on its own name and its own account but as a representative of a legal entity filing the participation form in the name of and on behalf of the legal entity.
5. The prizes to win are 1 of 10 R&S®RTB2000 within the time frame January 1, 2020 to December 31, 2020:
Prize: 1x R&S®RTB2000 Digital Oscilloscope
6. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich. The winner of the prizes will be informed by e-mail within 5 (5) working days.
7. The authorized representative of the legal entity shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.
8. R&S’ employees and members of their families and also person being familiar with the process of the draw and members of their families are excluded from filling the participation form.
9. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.
10. Personal data will be processed only for the purpose of this prize draw and deleted four (4) weeks after the draw, if not agreed otherwise.
11. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Competition. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn.
12. The participants cannot claim the prizes of this draw and no legal recourse is permitted in this respect.
13. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Competition.
