Rohde & Schwarz oscilloscope software

Rohde & Schwarz Oscilloscope software

Select from a wide range of application options for powerful debugging and enhanced analysis

Expand the analysis capabilities of your oscilloscope with application options for protocol-based triggering and decoding, automated compliance tests for the most popular interface standards, general analysis such as jitter or power, or vector signal analysis.

Serial triggering and decoding
Software name
Application
Description
Application
All
Description
Bus measurement for serial protocol decoding
Application
Automotive
Description
Triggering and decoding of 100Base-T1/BroadR-Reach®
Application
Embedded
Description
Universal decoding of 8b10b buses
Application
Aerospace
Description
Triggering and decoding of ARINC 429 buses
Application
Automotive
Description
Triggering and decoding of CAN and LIN interfaces
Application
Automotive
Description
Triggering and decoding of CAN-FD
Application
Automotive
Description
Triggering and decoding of clock extension peripheral interface (CXPI) buses in line with SAE J3076
Application
Embedded
Description
Decoding of 10BASE-T and 100BASE-TX Ethernet
Application
Automotive
Description
Triggering and decoding of FlexRay™ buses
Application
Embedded
Description
Triggering and decoding of I²C and 2-wire, 3-wire or 4-wire SPI buses
Application
Audio
Description
Triggering and decoding of I²S buses
Application
Configurable
Description
Triggering and decoding of any Manchester and NRZ coded serial protocol such as Profibus PA, DALI, MVB and many proprietary protocols
Application
Embedded
Description
Triggering and decoding of MDIO
Application
Aerospace
Description
Triggering and decoding of MIL-STD-1553 buses
Application
Mobile communications
Description
Triggering and decoding of the MIPI D-PHY based protocols DSI and CSI-2
Application
Mobile communications
Description
Triggering and decoding of the MIPI M-PHY physical layer and the UniPro protocol layer
Application
Mobile communications
Description
Triggering and decoding of the MIPI RFFE-protocol
Application
Embedded
Description
Triggering and decoding of PCI Express Gen 1.1 and 2.0 signals
Application
Embedded
Description
Triggering and decoding of UART based protocols and RS-232, RS-422 and RS-485 buses
Application
Automotive
Description
Triggering and decoding of fast channel and short and enhanced serial messages. Meets SENT SAE J2716 v2010 and legacy standard.
Application
Aerospace
Description
Triggering and decoding of SpaceWire data & communication buses.
Application
Embedded
Description
Triggering and decoding of all USB 1.x/2.0 data rates: high speed (480 Mbit/s), full speed (12 Mbit/s) and low speed (1.5 Mbit/s)
Application
Embedded
Description
Triggering and decoding of USB 3.1 Gen 1 and Gen 2 signals
Application
Embedded
Description
Triggering and decoding of USB power delivery (USB-PD) signals
Application
Embedded
Description
Triggering and decoding of USB-SSIC signals
Compliance test
Software name
Application
Minimum bandwith
Description
Application
Embedded
Minimum bandwith
600 Mhz
Description
Automated compliance test solution for 10/100/1000BASE-T Ethernet interfaces according to the IEEE test specification
Application
Embedded
Minimum bandwith
600 MHz
Description
Automated compliance test solution for 10/100/1000BASE-T Ethernet interfaces according to the IEEE test specification
Application
Embedded
Minimum bandwith
600 MHz
Description
Automated compliance test solution for 2.5G/5GBASE-T Ethernet interfaces in line with IEEE test specification
Application
Embedded
Minimum bandwith
2 GHz
Description
Automated compliance test solution for 10GBASE-T Ethernet interfaces according to the IEEE test specification
Application
Automotive
Minimum bandwith
600 MHz
Description
Automated compliance test solution for 10BASE-T1S Ethernet in line with IEEE 802.3cg specification
Application
Automotive
Minimum bandwith
600 MHz
Description
Automated compliance test solution for 100BASE-T1/BroadR-Reach® Ethernet in line with openSIG compliance test specifications
Application
Automotive
Minimum bandwith
2 GHz
Description
1000BASE-T1 Ethernet compliance test solution according to IEEE 802.3bp specification
Application
Embedded
Minimum bandwith
8 Ghz
Description
Automated compliance test solutions for DDR3 and DDR4
Application
Embedded
Minimum bandwith
1 GHz
Description
Automated compliance test solution for eMMC interfaces in line with JEDEC specification JESD84-B51 version 5.1, covering HS200 and HS400 bus speed modes
Application
Mobile communications
Minimum bandwith
4 GHz
Description
Automated compliance test solution for MIPI-D-PHY in line with MIPI and UNH-IOL test specifications
Application
Embedded
Minimum bandwith
6 GHz
Description
Automated compliance test of PCI Express Gen 1.1 and 2.0 interfaces (boards and cards) up to 2.5 Gbit/s data rate
Application
Embedded
Minimum bandwith
2 GHz
Description
Automated compliance test solution for USB 2.0 interfaces according to the USB-IF test specification
General analysis
Software name
Description
Description
Extends the trigger capabilities of the R&S®Scope Rider handheld oscilloscopes. Additional trigger types such as pattern, state, runt, slew rate, window, data2clock, serial pattern, timeout and interval or TV/video
Description
Clock data recovery of embedded clocks in realtime with the R&S®RTO oscilloscope
Description
Deembedding in realtime for fast results
Description
Frequency counter for R&S®Scope Rider handheld oscilloscopes
Description
The frequency response analysis option uses the oscilloscope’s built-in waveform generator to create stimulus signals ranging from 10 Hz to 25 MHz.
Description
Displays up to 64 harmonics with the R&S®Scope Rider handheld oscilloscopes
Description
Increases the vertical resolution of the Rohde & Schwarz oscilloscopes to up to 16 bits
Description
Capture and analyze pulsed and bursted signals over a long period
Description
Analyze high-speed serial signals with the hardware based clock data recovery (CDR) up to 16 Gbps
Description
Jitter Measurements such as cycle-to-cycle jitter or time interval error (TIE); enabling track display
Description
Separation of individual jitter components such as Random (RJ), Data Dependent (DDJ) or Period (PJ) jitter; display of step response, histograms, synthetic eye diagrams, spectrum and BER-bathtub curve
Description
Analysis of switch mode and linear power supply characteristics with automated measurements and wizard support
Description
Enhances the powerful multichannel spectrum analysis capability of Rohde & Schwarz oscilloscopes, incl. spectrogram
Description
Verify cable, connectors or PCB traces with single-ended or differential TDR/TDT. Uses the RTx-B7 16 GHz differential pulse source as stimulus
Description
Trigger on user-defined zones. Zones can be applied to channels, math and FFT signals
Vector signal analysis
Software name
Description
Description
Converts modulated signals to I/Q data for further processing
Description
The R&S®VSE vector signal explorer software brings the experience and power of Rohde & Schwarz signal analysis to the oscilloscope, offering a wide range of analysis options for troubleshooting and optimizing your designs
Analysis / Remote Control Software
Software name
Description
Description
The R&S®CDS campus dashboard software simplifies teaching of student groups in laboratories with multiple workbenches.
Description
R&S®InstrumentView remote analysis for Rohde & Schwarz oscilloscopes: Download waveforms from your oscilloscope to your computer and use this software to analyze them in detail.

Also interesting for you

Solution for

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

I want to receive information from Rohde & Schwarz via

Marketing permission

What does this mean in detail?

I agree that Rohde & Schwarz GmbH & Co. KG and the Rohde & Schwarz entity or subsidiary company mentioned in the imprint of this website, may contact me via the chosen channel (email or postal mail) for marketing and advertising purposes (e.g. information on special offers and discount promotions) related to, but not limited to, products and solutions in the fields of test and measurement, secure communications, monitoring and network testing, broadcast and media, and cybersecurity.

Your rights

This declaration of consent may be withdrawn at any time by sending an email with the subject "Unsubscribe" to news@rohde-schwarz.com. Additionally, a link to unsubscribe from future email advertisements is contained in each email sent. Further details on the use of personal data and the withdrawal procedure are set out in the Statement of Privacy.

Your request has been sent successfully. We will contact you shortly.
An error is occurred, please try it again later.