340 Results
This application note describes how to generate and analyze wideband digitally modulated signals in the mm-wave range. Rohde & Schwarz measuring equipment and some 3rd party off-the-shelf accessories are used for both signal generation and analysis.
02-Sep-2014 | AN-No. 1MA217
This application note describes the tests performed with additional equipment and presents straightforward solutions based on the CBTgo software.
06-Mar-2013 | AN-No. 1MA106
This application note focuses on fully automated, fast and accurate measurements, of linear FMCW radar signals. It explains the basic signal processing, the impact on radar key performance indicators in case of linearity deviations and explains test and measurement of linear FMCW signals in detail.
25-Apr-2014 | AN-No. 1EF88
This application note along with its corresponding white paper 1MA207 show how to use the R&S radar product portfolio to tackle test and measurement tasks in modern radar technology.
10-Aug-2012 | AN-No. 1MA127
This paper will provide an overview of the current status of the ITS worldwide with a focus on the IEEE 802.11p PHY. Additionally, the paper provides information on test and measurement solutions for devices and components used in ITS.
23-Jan-2014 | AN-No. 1MA152
UMTS Long Term Evolution (LTE) Technology Introduction
14-Sep-2009 | AN-No. 1MA111
Inside the lab and on the production line – this Rohde & Schwarz solution offers speed, accuracy and convenience for testing TX beamforming passive array antennas.
04-May-2018
R&S®Forum for Instrument Remote Control
28-Jun-2018 | AN-No. 1MA196
23-Jun-2021
Rohde & Schwarz presents mobile network infrastructure testing from design to production at MWC21 in BarcelonaRadio access network (RAN) landscapes deploy various kinds of infrastructure equipment, ranging from macro to small cell base stations. Evolving 5G NR technology in particular makes infrastructure equipment testing challenging due to increasing MIMO complexity and beamforming, wider bandwidths and new spectrum bands up to the mmWave range. Mobile World Congress is returning to Barcelona in June 2021, and Rohde & Schwarz will be showcasing its latest class-leading mobile network infrastructure testing solutions, which address various needs and enable the mobile industry to leverage the opportunities of 5G.
06-Nov-2019
Rohde & Schwarz together with Fraunhofer Institutes HHI and IAF join forces in researching 6G at THz frequenciesWhile the new 5G technology is at the first stages of rollout, Rohde & Schwarz, the Fraunhofer Institute for Telecommunications, Heinrich Hertz Institute, HHI and the Fraunhofer Institute for Applied Solid State Physics IAF are taking a step further with demonstrations in the terahertz (THz) frequency band, related to the 6th generation wireless mobile communication (6G). The collaboration has resulted in a wireless transmit and receive system operating between 270 and 320 GHz, with further frequency extensions for potential 6G bands already in preparation.
This document provides an introduction to SDR as used for military radios and presents the relevant T&M solutions offered by Rohde & Schwarz.
15-Sep-2012 | AN-No. 1MA206
RF signal analysis with Rohde & Schwarz spectrum analyzers and oscilloscopes - Application Brochure
This application note focuses on how to measure and analyze FMCW radar signals with up to 6 GHz bandwidth with an R&S® RTP oscilloscope.
07-Aug-2019 | AN-No. GFM318
The focus is on understanding as early as possible in the design process performance enhancements through linearization of non-linear devices.
20-Apr-2022 | AN-No. 1SL383
R&S®FSWP-K7CAL Enhanced Specifications for AM/FM/φM Modulation Analysis - Specifications
This document provides some technical background and guidance on how to optimize the measurement of one of the key performance parameters of WLAN transmitters - the Error Vector Magnitude (EVM).
This application note provides some technical background on how to optimize the measurement of one of the key performance parametersof 802.11be WLAN transmitters.
06-Sep-2022 | AN-No. 1EF114
This paper provides an important insight into the design and measurement challenges around the key topic of 5G New Radio in collaboration of a number of industry partners.
26-Nov-2018
R&S®VISA is a standardized software library that allows fast communications over diverse interfaces with a wide variety of T&M instruments that are detected on the network from PC applications.
26-May-2020 | AN-No. 1DC02
Rohde & Schwarz Drivers under VEE - Installation and Troubleshooting
20-Dec-2012 | AN-No. 1MA035
This document provides the technical specifications of the R&S®FSx-K8 Bluetooth® measurement application.
R&S Fxx-K30 Measure noise figure above 110GHz - Application Card
Software tool for fast and repeatable optimization of signal analyzer RF front-end settings
The signal conditioning in the RF front-end of signal analyzers is crucial to achieve the best performance with respect to image-suppression, noise-floor, dynamic range and other RF-key parameters.Precise signal levelling is especially important for complex measurements like Error-Vector-Magnitude (EVM). To minimize the measurement uncertainty from test system contributions over a wide range of different levels, the RF front-end needs to be adapted continuously according to the signal characteristics, signal power and frequency - ideally using an automatic levelling algorithm.This document describes the approach of a waveform specific, on-site characterization of the signal analyzer: For each waveform and frequency of interest, the instrument is evaluated in a first step. With this additional data, a fast and repeatable auto-levelling can be performed during the actual measurement.
24-Jan-2022 | AN-No. 1EF111
This application note provides guidance on the use of the software option, both for direct control and programming via the touchscreen, and for remote control using SCPI.
13-Jul-2020 | AN-No. GFM345
Get deep insight into your design with a dual-path, precisely synchronized source driving the Doherty amplifier and improve your yield.
12-Jul-2018
Active, high-impedance probes can be connected to spectrum analyzers, providing a practical and highly precise measurement solution to overcome an otherwise cumbersome RF testing issue. This application note provides information on how to use oscilloscope probes in RF measurements using spectrum analyzers
04-Jul-2023 | AN-No. 1EF116
R&S FSx-K50 Spurious Measurement Application - Specifications
This application note presents a solution for testing the complete radar system by generating any kind of radar echo signals.
01-Aug-2016 | AN-No. 1MA283