There are several reasons to characterize RF components under pulsed conditions. Often it is to prevent thermal damage to the device under test or to characterize it under operating conditions. Vector Network Analyzers offer integrated hardware and software for accurate device characterization under pulsed conditions. This hardware includes built-in pulse modulators, pulse generators and synchronization IO including for external device control.

VNA Source Phase Control Options for characterization of devices requiring a defined phase such as differential amplifiers, mixers, IQ mixers and others.

The R&S®ZNLE is a cost-efficient benchtop vector network analyzer. The analyzer's excellent performance makes it ideal for education, development and production.

The R&S®ZNB vector network analyzer features a wide dynamic range, low trace noise and high output power and is targeted at applications in the electronic goods and mobile radio industries.

The R&S®ZNA high-end vector network analyzers offer a DUT-centric approach,  an excellent RF-performance, a unique hardware concept and touch-only operation.

R&S®ZVH handheld cable & antenna analyzer increases efficiency in the field. Frequency range from 100 kHz to 3.6 GHz / 8 GHz.

The R&S®Cable Rider ZPH has all the essential basic measurement capabilities required for installing and maintaining antenna systems in the field. Learn more.

Series of automatic economy calibration units with frequencies up to 50 GHz. 2 port and 4 port models available. ZN-Z51 has configurable test ports.

R&S®ZN-Z1Exx economy calibration units from 5 kHz to 26.5 GHz. Two configurable ports: 3.5 mm-compatible or N-type. Further configurable as m or f.

The TDR option displays discontinuities, reflection factors or impedance versus delay/length.

R&S®ZNA-K8 / R&S®ZVA-K8 - software option for clear and straightforward converter control and converter parameter settings.

ZNBT true multiport VNA vector network analyzer with up to 24 true VNA ports. Frequency range from 9/100 kHz to 8.5/20/26.5/40 GHz.

ZN-Z15x automatic economy calibration units series up to 8.5 GHz: 2, 4 or 6 ports SMA(f), ZN-Z154 up to 24 ports, 2-port type N(f). ZN-Z156: 2 ports 67 GHz.

Options for characterizing frequency-converting devices such as mixers, block upconverters and downconverters, T/R modules and others.

The R&S®ZNL is a cost-efficient, portable vector network and spectrum analyzer, ideal for development, production and in the field

The FFT-based spectrum analysis function can be used to measure a DUT's spurious and harmonics, providing short sweep times along with high dynamic range and fine frequency resolution. It quickly detects undesired signal components (spurious) in converters and T/R modules. The marker-to-spectrumfunction directly gets to the root of problems in the event of unexpected S-parameter results, thus providing fast and extremely useful integrated diagnostics.

Noise figure measurement with vector network analyzers

ZV-Z5x series of automatic economy calibration units. Upper frequency ranging from 3 GHz (2 ports, 75 Ω) to 8 GHz (8 ports), 20 GHz (6 ports)

The R&S®ZNB3000 vector network analyzer is optimized for high-volume production and demanding applications, thanks to industry-leading measurement speed, stability and scalability.

ZN-Z3x: Automatic recalibration without reconnecting calibration equipment. Supports TVAC, multiport and production systems. CAN bus network control. Up to 40 GHz.

ZCAN Network Analyzer Calibration Kit - Economy calibration kit with N-type calibration standards open, short, match, through, all in both, male and female versions. Up to 3 GHz. Available for 50 Ω and 75 Ω reference impedance.

The CMX500 radio communication tester is a future-proof solution for 5G NR testing, with R&S®CMsquares, an intuitive and flexible web based user interface.

Brings the experience and power of Rohde & Schwarz signal analysis to PC and cloud applications

The R&S®IQW Wideband I/Q Data Recorder is a versatile instrument for fast and reliable realtime recording, storage and playback of wideband I/Q data streams.

R&S®FSV3000 signal and spectrum analyzer for signal analysis and demodulation from 10 Hz up to 50 GHz

The R&S®NRQ6 combines the accuracy of a power meter with excellent dynamic range. Extremely precise and fast down to –130 dBm.

The R&S®FSVA3000 signal and spectrum analyzer for signal analysis and demodulation from 10 Hz to 54 GHz

The FC330SR frequency converter is designed for down-conversion of RF signals in the frequency range from 220 GHz to 330 GHz to IF signals.

The IQ software interface significantly simplifies analysis of modulated signals. This option converts modulated signals to I/Q data in realtime. Explore now!