HSPA+

Login Register

Top content about HSPA+

Radio base stations WCDMA Spectrum analyzers

W-CDMA Base Station Receiver Tests According to TS25.141 Rel. 10

This application note describes how all required receiver (Rx) tests (TS25.141 Chapter 7) can be performed easily and quickly by using vector signal generators ...

HSPA+ Application Cards & Notes

Radio base stations WCDMA Spectrum analyzers

W-CDMA Base Station Receiver Tests According to TS25.141 Rel. 10

This application note describes how all required receiver (Rx) tests (TS25.141 Chapter 7) can be performed easily and quickly by using vector signal generators ...

Signal generators MIMO LTE-A

Higher Order MIMO Testing with the R&S®SMW200A Vector Signal Generator

This application note explains how to use the SMW for testing higher order MIMO systems by presenting different key applications.

Production testing Small cell testing Production

Production Measurements on 3GPP WCDMA Femtocells

This application note describes the tests commonly used during the production of Femtocells, focusing on WCDMA, HSPA, and HSPA+ technology.

HSPA Radio communication testers HSPA+

HSDPA RF Measurements with the R&S®CMW500 in line with 3GPP TS 34.121

This document provides a step-by-step guide on how to use a stand-alone R&S®CMW500 to perform HSDPA Tests (from Rel.5 up to Rel.8 / DC-HSDPA+) measurements on ...

RF measurements Radio communication testers Signal generators

NPR

Noise Power Ratio is a tool for WinIQSIM™ to generate noise power ratio stimulus signals and measure the resulting noise power ratio of a device.

Radio base stations WCDMA Spectrum analyzers

W-CDMA Base Station Transmitter Tests According to TS25.141 Rel. 10

This application note describes how transmitter (Tx) tests (TS25.141 Chapter 6) can be performed quickly and easily by using signal and spectrum analyzers from ...