Login or register to gain full access to the Knowledge+ platform!
I want to create an account
I already have an account
This Application Note supplements the video series, describing signal generation and signal analysis for Dynamic Spectrum Sharing (DSS) for LTE and 5G NR.
MIMO testing requires a signal generator with multipath and standard-compliant fading simulation in all signal paths.
Networks for IoT applications bring a new set of demands on network performance that focus on maximizing availability and minimizing battery consumption.
In this whitepaper we introduce the NB-IoT technology with an emphasis on the tight connection to LTE.
Learn about "Dynamic Spectrum Sharing for 5G" and the latest measurement tools & techniques for successful DSS implementation in this webinar.
Demonstration of how to create LTE and LTE-Advanced signals, for example with cross-carrier scheduling for carrier aggregation.
Testing LTE-U capable eNodeB with R&S®SMW200A and R&S®FSW
In this video, technology marketing manager Arnd Sibila discusses how MIMO technology is helping to address the capacity needs of mobile networks, and how to test ...
This application note describes the technology behind NG eCall and presents conformance tests for NG eCall using the R&S®CMW500 RF tester.
In this paper, we present the performance and the basic control of a MNA used for automatic spectrum clearance in LTE and 5G systems.Automatic spectrum clearance ...
LTE beamforming can be accurately tested with one or more R&S®RTO digital oscilloscopes for a 1×2, 1×4 or even a 1×8 MIMO system.
This application note describes the possibilities to measure LTE MIMO with the LTE-Software R&S®FS-K102/K103PC in combination with an R&S®RTO1044 ...
This application note employs preliminary theoretical analysis and demonstrates how the problems of indevice coexistence can be measured.
This application note describes how to use the LTE Frequency Division Duplex (FDD) and Time Division Duplex (TDD) measurement functionality.
This application note shows how to determine the quality of a video streamed by an LTE mobile with R&S®CMW500 Radio Communication Tester and R&S®VTE Video ...
This application note explains how to perform LTE base station measurements over the air (OTA) using the R&S®FSH4/8/13/20 handheld spectrum analyzer.
1MA210 - Testing LTE Release 9 Features. This Application Note describes the T&M methods for LTE Release 9 features using Rohde & Schwarz instruments.
This Application Note presents Test & Measurement equipment for the broadcast and mobile radio sector and discusses some possible test setups.
This application note shows how to perform LTE terminal block error rate (BLER) and throughput tests under fading conditions with the R&S®CMW500 Protocol ...
